Subject: [PATCH v4] pinctrl: mediatek: Implement wake handler and suspend resume

From: [email-masked] (Sudeep Holla)
Date: Mon, 24 Aug 2015 17:27:53 +0100

On 14/08/15 09:38, maoguang.meng at mediatek.com wrote:
> From: Maoguang Meng <[email-masked]>
>
> This patch implement irq_set_wake to get who is wakeup source and
> setup on suspend resume.
>
> Signed-off-by: Maoguang Meng <[email-masked]>
>
> ---
> changes since v3:
> -add a comment in mtk_eint_chip_read_mask.
> -delete ALIGN when allocate eint_offsets.ports.
> -fix unrelated change.
>
> changes since v2:
> -modify irq_wake to handle irq wakeup source.
> -allocate two buffers separately.
> -fix some codestyle.
>
> Changes since v1:
> -implement irq_wake handler.
> ---
>
>   drivers/pinctrl/mediatek/pinctrl-mt8173.c     |  1 +
>   drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 91 ++++++++++++++++++++++++++-
>   drivers/pinctrl/mediatek/pinctrl-mtk-common.h |  4 ++
>   3 files changed, 95 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8173.c b/drivers/pinctrl/mediatek/pinctrl-mt8173.c
> index d0c811d..ad27184 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8173.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8173.c
> @@ -385,6 +385,7 @@ static struct platform_driver mtk_pinctrl_driver = {
>   	.driver = {
>   		.name = "mediatek-mt8173-pinctrl",
>   		.of_match_table = mt8173_pctrl_match,
> +		.pm = &mtk_eint_pm_ops,
>   	},
>   };
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> index ad1ea16..fe34ce9 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> @@ -33,6 +33,7 @@
>   #include <linux/mfd/syscon.h>
>   #include <linux/delay.h>
>   #include <linux/interrupt.h>
> +#include <linux/pm.h>
>   #include <dt-bindings/pinctrl/mt65xx.h>
>
>   #include "../core.h"
> @@ -1062,6 +1063,77 @@ static int mtk_eint_set_type(struct irq_data *d,
>   	return 0;
>   }
>
> +static int mtk_eint_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +	struct mtk_pinctrl *pctl = irq_data_get_irq_chip_data(d);
> +	int shift = d->hwirq & 0x1f;
> +	int reg = d->hwirq >> 5;
> +
> +	if (on)
> +		pctl->wake_mask[reg] |= BIT(shift);
> +	else
> +		pctl->wake_mask[reg] &= ~BIT(shift);
> +
> +	return 0;
> +}

Does this pinmux controller:

1. Support wake-up configuration ? If not, you need to use
    IRQCHIP_SKIP_SET_WAKE. I don't see any value in writing the
    mask_{set,clear} if the same registers are used for {en,dis}able

2. Is in always on domain ? If not, you need save/restore only to
    resume back the functionality. Generally we can set 	
    IRQCHIP_MASK_ON_SUSPEND to ensure non-wake-up interrupts are
    disabled during suspend and re-enabled in resume path. You just
    save/restore raw values without tracking the wake-up source.

Also I see that no care is taken to set the port irq as wake enable
source. It may work with current mainline, but won't with -next. Please
ensure the port irq to the parent interrupt controller remains
enabled(i.e set as wake).

Regards,
Sudeep