From: nicolas.ferre@atmel•com (Nicolas Ferre)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH linux-next v9 0/3] mfd: flexcom: add a driver for Flexcom
Date: Wed, 23 Sep 2015 12:29:36 +0200 [thread overview]
Message-ID: <56027F10.1060804@atmel.com> (raw)
In-Reply-To: <20150920041912.GS3039@x1>
Le 20/09/2015 06:19, Lee Jones a ?crit :
> Patch set description?
Cyrille actually placed it as the v1 changelog below...
> Once Rob is satisfied, please re-submit this set with Nicolas' Acks
I think that Rob was okay with the DT binding: "A few comments, but in
general looks fine." and it may not be important to tack Rob for
addition of his formal tag...
Or maybe this message can act as a "ping" for Rob...
> and I will re-review.
We wait one or two days before Cyrille re-send the series. We are
looking forward to using this driver in Linux-next soon.
Bye,
>> ChangeLog
>>
>> v9:
>> - go back to v5 (use the new "atmel,flexcom-mode" DT property).
>> - fix the name of the spi node in the DT example: from spi at f8034400 to
>> spi at 400
>> - align the fields of the struct platform_driver atmel_flexcom_driver as
>> suggested by Lee Jones.
>>
>> v8:
>> - fix the name of the spi node in the DT example: from spi at f8034400 to
>> spi at 2,0
>> - use the return code of op_property_read_u32_index() instead of -EINVAL
>> to report error.
>> - add Acked-by from Nicolas Ferre
>>
>> v7:
>> - read the operating mode from the very first u32 of the reg property from
>> the first available child node (should be unique).
>> - update the DT bindings documentation accordingly.
>>
>> v6:
>> - select the operating mode according to the "compatible" DT property of
>> the first available child node (should be unique).
>> - remove the "atmel,flexcom-mode" DT property so the need of a header file
>> defining macros for the possible values of this deprecated property.
>>
>> v5:
>> - create a header file containing macros used by DT bindings
>> - use numeric constants instead of strings to select the Flexcom mode
>> - change the license to "GPL v2"
>> - update the DT binding documentation to make it more readable and add
>> references to USART, SPI and I2C DT binding documentations. remove the
>> useless label in the Example section.
>> - change the register prefix from FX_ to FLEX_ to match the Flexcom
>> programmer datasheet.
>> - rename some variables to make them more understandable.
>>
>> v4:
>> - check clk_prepare_enable() return code in atmel_flexcom_probe()
>> - add a commit message to the DT binding patch
>>
>> v3:
>> - remove MODULE_ALIAS()
>> - add Acked-by from Boris Brezillon and Alexandre Belloni
>>
>> v2:
>> - enhance the documentation of DT bindings and change the way the "ranges"
>> property is used.
>> - replace __raw_readl() and __raw_writel() by readl() and writel().
>> - change the module license to "GPL" for v2 or later
>> - print the selected flexcom mode after the hardware version
>>
>> v1:
>> This series of patches a support to the Atmel Flexcom, a wrapper which
>> integrates an USART, a SPI controller and a TWI controller. Only one
>> peripheral can be used at a time. The active function is selected though
>> the Flexcom Mode Register.
>>
>> Cyrille Pitchen (3):
>> mfd: atmel-flexcom: create include file with macros used by DT
>> bindings
>> mfd: devicetree: add bindings for Atmel Flexcom
>> mfd: atmel-flexcom: add a driver for Atmel Flexible Serial
>> Communication Unit
>>
>> .../devicetree/bindings/mfd/atmel-flexcom.txt | 67 +++++++++++++
>> drivers/mfd/Kconfig | 11 +++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/atmel-flexcom.c | 104 +++++++++++++++++++++
>> include/dt-bindings/mfd/atmel-flexcom.h | 16 ++++
>> 5 files changed, 199 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
>> create mode 100644 drivers/mfd/atmel-flexcom.c
>> create mode 100644 include/dt-bindings/mfd/atmel-flexcom.h
>>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2015-09-23 10:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-01 14:46 [PATCH linux-next v9 0/3] mfd: flexcom: add a driver for Flexcom Cyrille Pitchen
2015-09-01 14:46 ` [PATCH linux-next v9 1/3] mfd: atmel-flexcom: create include file with macros used by DT bindings Cyrille Pitchen
2015-09-03 15:42 ` Nicolas Ferre
2015-09-08 23:33 ` Rob Herring
2015-09-01 14:46 ` [PATCH linux-next v9 2/3] mfd: devicetree: add bindings for Atmel Flexcom Cyrille Pitchen
2015-09-03 15:56 ` Nicolas Ferre
2015-09-08 23:40 ` Rob Herring
2015-09-09 15:45 ` Cyrille Pitchen
2015-09-10 0:06 ` Rob Herring
2015-09-21 12:15 ` Cyrille Pitchen
2015-09-01 14:46 ` [PATCH linux-next v9 3/3] mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit Cyrille Pitchen
2015-09-08 16:04 ` [PATCH linux-next v9 0/3] mfd: flexcom: add a driver for Flexcom Cyrille Pitchen
2015-09-08 16:26 ` Lee Jones
2015-09-20 4:19 ` Lee Jones
2015-09-23 10:29 ` Nicolas Ferre [this message]
2015-09-24 17:37 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56027F10.1060804@atmel.com \
--to=nicolas.ferre@atmel$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox