From: patrice.chotard@st•com (Patrice Chotard)
To: linux-arm-kernel@lists•infradead.org
Subject: [STLinux Kernel] [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level
Date: Thu, 24 Sep 2015 08:58:04 +0200 [thread overview]
Message-ID: <56039EFC.9010405@st.com> (raw)
In-Reply-To: <1443037049-6167-4-git-send-email-maxime.coquelin@st.com>
Hi Max
On 09/23/2015 09:37 PM, Maxime Coquelin wrote:
> A borad might not expose the USB2.0 ports, so disable them by default in SoC
typo borad
Otherwise, for the series
Acked-by: Patrice Chotard <patrice.chotard@st•com>
Patrice
> file, and enable them in b2120 board.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st•com>
> ---
> arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++
> arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> 2 files changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
> index 16f02c5..8af1e73 100644
> --- a/arch/arm/boot/dts/stih410-b2120.dts
> +++ b/arch/arm/boot/dts/stih410-b2120.dts
> @@ -35,5 +35,29 @@
> sd-uhs-sdr104;
> sd-uhs-ddr50;
> };
> +
> + usb2_picophy1: phy2 {
> + status = "okay";
> + };
> +
> + usb2_picophy2: phy3 {
> + status = "okay";
> + };
> +
> + ohci0: usb at 9a03c00 {
> + status = "okay";
> + };
> +
> + ehci0: usb at 9a03e00 {
> + status = "okay";
> + };
> +
> + ohci1: usb at 9a83c00 {
> + status = "okay";
> + };
> +
> + ehci1: usb at 9a83e00 {
> + status = "okay";
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 23f4a48..e3150e3 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -22,6 +22,8 @@
> resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> <&picophyreset STIH407_PICOPHY0_RESET>;
> reset-names = "global", "port";
> +
> + status = "disabled";
> };
>
> usb2_picophy2: phy3 {
> @@ -31,6 +33,8 @@
> resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> <&picophyreset STIH407_PICOPHY1_RESET>;
> reset-names = "global", "port";
> +
> + status = "disabled";
> };
>
> ohci0: usb at 9a03c00 {
> @@ -43,6 +47,8 @@
> reset-names = "power", "softreset";
> phys = <&usb2_picophy1>;
> phy-names = "usb";
> +
> + status = "disabled";
> };
>
> ehci0: usb at 9a03e00 {
> @@ -57,6 +63,8 @@
> reset-names = "power", "softreset";
> phys = <&usb2_picophy1>;
> phy-names = "usb";
> +
> + status = "disabled";
> };
>
> ohci1: usb at 9a83c00 {
> @@ -69,6 +77,8 @@
> reset-names = "power", "softreset";
> phys = <&usb2_picophy2>;
> phy-names = "usb";
> +
> + status = "disabled";
> };
>
> ehci1: usb at 9a83e00 {
> @@ -83,6 +93,8 @@
> reset-names = "power", "softreset";
> phys = <&usb2_picophy2>;
> phy-names = "usb";
> +
> + status = "disabled";
> };
>
> sti-display-subsystem {
next prev parent reply other threads:[~2015-09-24 6:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-23 19:37 [PATCH 0/3] ARM: dts: Various STi DT clean-ups Maxime Coquelin
2015-09-23 19:37 ` [PATCH 1/3] ARM: dts: stih407: Enable PWM nodes only board level Maxime Coquelin
2015-09-23 19:37 ` [PATCH 2/3] ARM: dts: stih407/410: Tidy up display nodes Maxime Coquelin
2015-09-23 19:37 ` [PATCH 3/3] ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level Maxime Coquelin
2015-09-24 6:58 ` Patrice Chotard [this message]
2015-09-29 8:56 ` [STLinux Kernel] " Maxime Coquelin
2015-09-27 22:45 ` [STLinux Kernel] [PATCH 0/3] ARM: dts: Various STi DT clean-ups Peter Griffin
2015-09-30 9:15 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56039EFC.9010405@st.com \
--to=patrice.chotard@st$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox