Subject: [PATCH v2 7/9] rockchip: make sure timer5 is enabled on rk3036 platforms

From: [email-masked] (Xing Zheng)
Date: Mon, 28 Sep 2015 20:25:07 +0800

On 2015?09?17? 23:05, Heiko St?bner wrote:
> Am Donnerstag, 17. September 2015, 18:37:24 schrieb Xing Zheng:
>> The timer5 supplies the architected timer and thus as has to run when
>> the system clocksource and clockevents drivers are registered.
> please kindly ask the people doing uboot development to do this in uboot
> itself in future socs :-) - for example Simon's rk3288 mainline uboot does
> this correctly.
OK, I will ask the engineer who is doing uboot whether needs to add
this patch. So I will remove it from the patchset v3 of "Build and support
rk3036 SoC platform".

Thanks.
>> Signed-off-by: Xing Zheng<[email-masked]>
>> ---
>>
>> Changes in v2: None
>>
>>   arch/arm/mach-rockchip/rockchip.c |   22 ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/mach-rockchip/rockchip.c
>> b/arch/arm/mach-rockchip/rockchip.c index b6cf3b4..937047f 100644
>> --- a/arch/arm/mach-rockchip/rockchip.c
>> +++ b/arch/arm/mach-rockchip/rockchip.c
>> @@ -32,6 +32,8 @@
>>   #define RK3288_GRF_SOC_CON0 0x244
>>   #define RK3288_TIMER6_7_PHYS 0xff810000
>>
>> +#define RK3036_TIMER5_PHYS 0x200440a0
>> +
> #define RK3036_TIMER_PHYS 0x20044000
> -->  the actual base address of the timer block
>
> As it looks like that we'll need to duplicate that timer init at least for the
> rk3036 and the timer ip in question is actually the same on both, please split
> out the actual work into a separate function like
>
> static void rockchip_init_arch_timer_supply(resource_size_t phys, int offs)
> {
> 		reg_base = ioremap(phys, SZ_16K);
> 		if (reg_base) {
> 			writel(0, reg_base + offs + 0x10);
> 			writel(0xffffffff, reg_base + offs);
> 			writel(0xffffffff, reg_base + offs + 0x04);
> 			writel(1, reg_base + offs + 0x10);
> 			dsb();
> 			iounmap(reg_base);
> 		} else {
> 			pr_err("rockchip: could not map timer registers\n");
> 		}
> }
Done.
>
>>   static void __init rockchip_timer_init(void)
>>   {
>>   	if (of_machine_is_compatible("rockchip,rk3288")) {
>> @@ -64,6 +66,25 @@ static void __init rockchip_timer_init(void)
> for the rk3288 exchange the timer init against
> rockchip_init_arch_timer_supply(RK3288_TIMER6_7_PHYS, 0x20);
Done.
>>   			regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
>>   		else
>>   			pr_err("rockchip: could not get grf syscon\n");
>> +	} else if (of_machine_is_compatible("rockchip,rk3036")) {
>> +		void __iomem *reg_base;
>> +
>> +		/*
>> +		 * Most/all uboot versions for rk3036 don't enable timer5
>> +		 * which is needed for the architected timer to work.
>> +		 * So make sure it is running during early boot.
>> +		 */
>> +		reg_base = ioremap(RK3036_TIMER5_PHYS, SZ_16K);
>> +		if (reg_base) {
>> +			writel(0, reg_base + 0x10);
>> +			writel(0xffffffff, reg_base);
>> +			writel(0xffffffff, reg_base + 0x04);
>> +			writel(1, reg_base + 0x10);
>> +			dsb();
>> +			iounmap(reg_base);
>> +		} else {
>> +			pr_err("rockchip: could not map timer5 registers\n");
>> +		}
> rockchip_init_arch_timer_supply(RK3036_TIMER_PHYS, 0xa0);
Done.
>>   	}
>>
>>   	of_clk_init(NULL);
>> @@ -79,6 +100,7 @@ static void __init rockchip_dt_init(void)
>>
>>   static const char * const rockchip_board_dt_compat[] = {
>>   	"rockchip,rk2928",
>> +	"rockchip,rk3036",
>>   	"rockchip,rk3066a",
>>   	"rockchip,rk3066b",
>>   	"rockchip,rk3188",
>