From: k.kozlowski@samsung•com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v5 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Date: Wed, 30 Sep 2015 14:32:04 +0900 [thread overview]
Message-ID: <560B73D4.30109@samsung.com> (raw)
In-Reply-To: <1442907477-3283-1-git-send-email-ykk@rock-chips.com>
On 22.09.2015 16:37, Yakir Yang wrote:
> Both hsync/vsync polarity and interlace mode can be parsed from
> drm display mode, and dynamic_range and ycbcr_coeff can be judge
> by the video code.
>
> But presumably Exynos still relies on the DT properties, so take
> good use of mode_fixup() in to achieve the compatibility hacks.
>
> Signed-off-by: Yakir Yang <ykk@rock-chips•com>
> ---
> Changes in v5:
> - Switch video timing type to "u32", so driver could use "of_property_read_u32"
> to get the backword timing values.
Okay
> Krzysztof suggest me that driver could use
> the "of_property_read_bool" to get backword timing values, but that interfacs
> would modify the original drm_display_mode timing directly (whether those
> properties exists or not).
Hmm, I don't understand. You have a:
struct video_info {
bool h_sync_polarity;
bool v_sync_polarity;
bool interlaced;
};
so what is wrong with:
dp_video_config->h_sync_polarity =
of_property_read_bool(dp_node, "hsync-active-high");
Is it exactly the same binding as previously?
Best regards,
Krzysztof
>
> Changes in v4:
> - Provide backword compatibility with samsung. (Krzysztof)
>
> Changes in v3:
> - Dynamic parse video timing info from struct drm_display_mode and
> struct drm_display_info. (Thierry)
>
> Changes in v2: None
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 144 +++++++++++++--------
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 8 +-
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
> 3 files changed, 104 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 1e3c8d3..6be139b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
> return;
> }
>
> - ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
> - dp->video_info->link_rate);
> + ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
> + dp->video_info.link_rate);
> if (ret) {
> dev_err(dp->dev, "unable to do link train\n");
> return;
> @@ -1030,6 +1030,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
> dp->dpms_mode = DRM_MODE_DPMS_OFF;
> }
>
> +static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
> + struct drm_display_mode *orig_mode,
> + struct drm_display_mode *mode)
> +{
> + struct analogix_dp_device *dp = bridge->driver_private;
> + struct drm_display_info *display_info = &dp->connector->display_info;
> + struct video_info *video = &dp->video_info;
> + struct device_node *dp_node = dp->dev->of_node;
> + int vic;
> +
> + /* Input video interlaces & hsync pol & vsync pol */
> + video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
> + video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
> + video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
> +
> + /* Input video dynamic_range & colorimetry */
> + vic = drm_match_cea_mode(mode);
> + if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
> + (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
> + video->dynamic_range = CEA;
> + video->ycbcr_coeff = COLOR_YCBCR601;
> + } else if (vic) {
> + video->dynamic_range = CEA;
> + video->ycbcr_coeff = COLOR_YCBCR709;
> + } else {
> + video->dynamic_range = VESA;
> + video->ycbcr_coeff = COLOR_YCBCR709;
> + }
> +
> + /* Input vide bpc and color_formats */
> + switch (display_info->bpc) {
> + case 12:
> + video->color_depth = COLOR_12;
> + break;
> + case 10:
> + video->color_depth = COLOR_10;
> + break;
> + case 8:
> + video->color_depth = COLOR_8;
> + break;
> + case 6:
> + video->color_depth = COLOR_6;
> + break;
> + default:
> + video->color_depth = COLOR_8;
> + break;
> + }
> + if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> + video->color_space = COLOR_YCBCR444;
> + else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
> + video->color_space = COLOR_YCBCR422;
> + else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
> + video->color_space = COLOR_RGB;
> + else
> + video->color_space = COLOR_RGB;
> +
> + /*
> + * NOTE: those property parsing code is used for providing backward
> + * compatibility for samsung platform.
> + * Due to we used the "of_property_read_u32" interfaces, when this
> + * property isn't present, the "video_info" can keep the original
> + * values and wouldn't be modified.
> + */
> + of_property_read_u32(dp_node, "samsung,color-space",
> + &video->color_space);
> + of_property_read_u32(dp_node, "samsung,dynamic-range",
> + &video->dynamic_range);
> + of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
> + &video->ycbcr_coeff);
> + of_property_read_u32(dp_node, "samsung,color-depth",
> + &video->color_depth);
> + of_property_read_u32(dp_node, "hsync-active-high",
> + &video->h_sync_polarity);
> + of_property_read_u32(dp_node, "vsync-active-high",
> + &video->v_sync_polarity);
> + of_property_read_u32(dp_node, "interlaced",
> + &video->interlaced);
> +}
> +
> static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
> {
> /* do nothing */
> @@ -1040,6 +1119,7 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
> .disable = analogix_dp_bridge_disable,
> .pre_enable = analogix_dp_bridge_nop,
> .post_disable = analogix_dp_bridge_nop,
> + .mode_set = analogix_dp_bridge_mode_set,
> .attach = analogix_dp_bridge_attach,
> };
>
> @@ -1070,62 +1150,24 @@ static int analogix_dp_create_bridge(struct drm_device *drm_dev,
> return 0;
> }
>
> -static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
> +static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
> {
> - struct device_node *dp_node = dev->of_node;
> - struct video_info *dp_video_config;
> -
> - dp_video_config = devm_kzalloc(dev, sizeof(*dp_video_config),
> - GFP_KERNEL);
> - if (!dp_video_config)
> - return ERR_PTR(-ENOMEM);
> -
> - dp_video_config->h_sync_polarity =
> - of_property_read_bool(dp_node, "hsync-active-high");
> -
> - dp_video_config->v_sync_polarity =
> - of_property_read_bool(dp_node, "vsync-active-high");
> -
> - dp_video_config->interlaced =
> - of_property_read_bool(dp_node, "interlaced");
> -
> - if (of_property_read_u32(dp_node, "samsung,color-space",
> - &dp_video_config->color_space)) {
> - dev_err(dev, "failed to get color-space\n");
> - return ERR_PTR(-EINVAL);
> - }
> -
> - if (of_property_read_u32(dp_node, "samsung,dynamic-range",
> - &dp_video_config->dynamic_range)) {
> - dev_err(dev, "failed to get dynamic-range\n");
> - return ERR_PTR(-EINVAL);
> - }
> -
> - if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
> - &dp_video_config->ycbcr_coeff)) {
> - dev_err(dev, "failed to get ycbcr-coeff\n");
> - return ERR_PTR(-EINVAL);
> - }
> -
> - if (of_property_read_u32(dp_node, "samsung,color-depth",
> - &dp_video_config->color_depth)) {
> - dev_err(dev, "failed to get color-depth\n");
> - return ERR_PTR(-EINVAL);
> - }
> + struct device_node *dp_node = dp->dev->of_node;
> + struct video_info *video_info = &dp->video_info
>
> if (of_property_read_u32(dp_node, "samsung,link-rate",
> - &dp_video_config->link_rate)) {
> + &video_info->link_rate)) {
> dev_err(dev, "failed to get link-rate\n");
> - return ERR_PTR(-EINVAL);
> + return -EINVAL;
> }
>
> if (of_property_read_u32(dp_node, "samsung,lane-count",
> - &dp_video_config->lane_count)) {
> + &video_info->lane_count)) {
> dev_err(dev, "failed to get lane-count\n");
> - return ERR_PTR(-EINVAL);
> + return -EINVAL;
> }
>
> - return dp_video_config;
> + return 0;
> }
>
> int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
> @@ -1158,9 +1200,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
> */
> dp->plat_data = plat_data;
>
> - dp->video_info = analogix_dp_dt_parse_pdata(&pdev->dev);
> - if (IS_ERR(dp->video_info))
> - return PTR_ERR(dp->video_info);
> + ret = analogix_dp_dt_parse_pdata(dp);
> + if (ret)
> + return ret;
>
> dp->phy = devm_phy_get(dp->dev, "dp");
> if (IS_ERR(dp->phy)) {
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index 9a90a18..730486d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -120,9 +120,9 @@ enum dp_irq_type {
> struct video_info {
> char *name;
>
> - bool h_sync_polarity;
> - bool v_sync_polarity;
> - bool interlaced;
> + u32 h_sync_polarity;
> + u32 v_sync_polarity;
> + u32 interlaced;
>
> enum color_space color_space;
> enum dynamic_range dynamic_range;
> @@ -154,7 +154,7 @@ struct analogix_dp_device {
> unsigned int irq;
> void __iomem *reg_base;
>
> - struct video_info *video_info;
> + struct video_info video_info;
> struct link_train link_train;
> struct work_struct hotplug_work;
> struct phy *phy;
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index a388c0a..861097a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -1084,15 +1084,15 @@ void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
> u32 reg;
>
> /* Configure the input color depth, color space, dynamic range */
> - reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
> - (dp->video_info->color_depth << IN_BPC_SHIFT) |
> - (dp->video_info->color_space << IN_COLOR_F_SHIFT);
> + reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
> + (dp->video_info.color_depth << IN_BPC_SHIFT) |
> + (dp->video_info.color_space << IN_COLOR_F_SHIFT);
> writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
>
> /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
> reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
> reg &= ~IN_YC_COEFFI_MASK;
> - if (dp->video_info->ycbcr_coeff)
> + if (dp->video_info.ycbcr_coeff)
> reg |= IN_YC_COEFFI_ITU709;
> else
> reg |= IN_YC_COEFFI_ITU601;
> @@ -1229,17 +1229,17 @@ void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
>
> reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
> reg &= ~INTERACE_SCAN_CFG;
> - reg |= (dp->video_info->interlaced << 2);
> + reg |= (dp->video_info.interlaced << 2);
> writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>
> reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
> reg &= ~VSYNC_POLARITY_CFG;
> - reg |= (dp->video_info->v_sync_polarity << 1);
> + reg |= (dp->video_info.v_sync_polarity << 1);
> writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>
> reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
> reg &= ~HSYNC_POLARITY_CFG;
> - reg |= (dp->video_info->h_sync_polarity << 0);
> + reg |= (dp->video_info.h_sync_polarity << 0);
> writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>
> reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
>
next prev parent reply other threads:[~2015-09-30 5:32 UTC|newest]
Thread overview: 133+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-01 5:46 [PATCH v4 0/16] Add Analogix Core Display Port Driver Yakir Yang
2015-09-01 5:46 ` [PATCH v4 01/16] drm: exynos/dp: fix code style Yakir Yang
2015-09-03 0:21 ` Krzysztof Kozlowski
2015-09-03 5:04 ` Yakir Yang
2015-09-03 5:08 ` Krzysztof Kozlowski
2015-09-03 5:33 ` Yakir Yang
2015-09-03 5:57 ` Joe Perches
2015-09-06 1:33 ` Yakir Yang
2015-09-01 5:49 ` [PATCH v4 02/16] drm: exynos/dp: convert to drm bridge mode Yakir Yang
2015-09-01 5:52 ` [PATCH v4 04/16] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-09-01 5:55 ` [PATCH v4 05/16] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & colorimetry Yakir Yang
2015-09-03 8:04 ` Krzysztof Kozlowski
2015-09-06 2:00 ` Yakir Yang
2015-09-01 5:58 ` [PATCH v4 06/16] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-09-01 6:01 ` [PATCH v4 07/16] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-09-03 0:01 ` Krzysztof Kozlowski
2015-09-01 6:01 ` [PATCH v4 08/16] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
2015-09-01 14:24 ` Heiko Stuebner
2015-09-01 21:00 ` Heiko Stuebner
2015-09-01 6:01 ` [PATCH v4 09/16] drm: rockchip: add bpc and color mode setting Yakir Yang
2015-09-01 21:00 ` Heiko Stuebner
2015-09-01 6:04 ` [PATCH v4 10/16] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-09-01 16:51 ` Heiko Stuebner
2015-09-01 20:58 ` Heiko Stuebner
2015-09-02 13:27 ` Rob Herring
2015-09-03 3:25 ` Yakir Yang
2015-09-03 13:52 ` Heiko Stuebner
2015-09-06 4:09 ` Yakir Yang
2015-09-01 6:07 ` [PATCH v4 11/16] drm: bridge: analogix/dp: add platform device type support Yakir Yang
2015-09-04 0:36 ` Krzysztof Kozlowski
2015-09-06 4:07 ` Yakir Yang
2015-09-06 23:55 ` Krzysztof Kozlowski
2015-09-01 6:09 ` [PATCH v4 12/16] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-09-01 6:11 ` [PATCH v4 13/16] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-09-01 6:14 ` [PATCH v4 14/16] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-09-02 20:17 ` Rob Herring
2015-09-03 4:27 ` Yakir Yang
2015-09-03 9:04 ` Thierry Reding
2015-09-04 10:20 ` Russell King - ARM Linux
2015-09-07 9:01 ` Thierry Reding
[not found] ` <55EBBA0C.1030100@rock-chips.com>
2015-09-07 8:20 ` Thierry Reding
2015-09-04 21:46 ` Rob Herring
2015-09-06 8:20 ` Yakir Yang
2015-09-07 8:39 ` Thierry Reding
2015-09-03 8:47 ` Thierry Reding
2015-09-03 21:55 ` Rob Herring
2015-09-04 10:01 ` Thierry Reding
2015-09-01 6:17 ` [PATCH v4 15/16] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-09-01 6:20 ` [PATCH v4 16/16] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
2015-09-01 21:47 ` [PATCH v4 0/16] Add Analogix Core Display Port Driver Heiko Stuebner
[not found] ` <1441086598-24995-1-git-send-email-ykk@rock-chips.com>
2015-09-01 20:46 ` [PATCH v4 03/16] drm: bridge: analogix/dp: split exynos dp driver to bridge dir Heiko Stuebner
2015-09-04 21:06 ` Rob Herring
2015-09-04 21:29 ` Heiko Stuebner
2015-09-07 8:11 ` Thierry Reding
2015-09-02 14:50 ` Emil Velikov
2015-09-03 3:55 ` Yakir Yang
2015-09-03 0:58 ` Krzysztof Kozlowski
2015-09-03 5:30 ` Yakir Yang
2015-09-04 0:41 ` Krzysztof Kozlowski
2015-09-06 7:49 ` Yakir Yang
2015-09-07 0:22 ` Krzysztof Kozlowski
2015-09-22 7:20 ` [PATCH v5 0/17] Add Analogix Core Display Port Driver Yakir Yang
2015-09-22 7:26 ` [PATCH v5 01/17] drm: exynos: dp: convert to drm bridge mode Yakir Yang
2015-09-22 7:34 ` [PATCH v5 03/17] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-09-30 5:22 ` Krzysztof Kozlowski
2015-09-30 6:52 ` Yakir Yang
2015-09-22 7:35 ` [PATCH v5 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-09-22 7:37 ` [PATCH v5 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-09-30 5:32 ` Krzysztof Kozlowski [this message]
[not found] ` <560B8CF1.7050102@rock-chips.com>
2015-09-30 7:34 ` Krzysztof Kozlowski
[not found] ` <560B9B33.2060409@rock-chips.com>
2015-09-30 8:26 ` Krzysztof Kozlowski
2015-09-30 9:39 ` Yakir Yang
2015-09-22 7:40 ` [PATCH v5 06/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-09-22 7:43 ` [PATCH v5 07/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-09-30 5:39 ` Krzysztof Kozlowski
2015-09-30 7:20 ` Yakir Yang
2015-09-22 7:45 ` [PATCH v5 08/17] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-09-22 7:48 ` [PATCH v5 09/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-09-22 7:48 ` [PATCH v5 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-09-22 7:51 ` [PATCH v5 11/17] Documentation: phy: add document for rockchip dp phy Yakir Yang
2015-09-22 7:55 ` [PATCH v5 12/17] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-09-22 7:57 ` [PATCH v5 13/17] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-09-22 8:00 ` [PATCH v5 14/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-09-22 8:02 ` [PATCH v5 15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-09-22 8:05 ` [PATCH v5 16/17] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-09-22 8:07 ` [PATCH v5 17/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
[not found] ` <1442906963-2883-1-git-send-email-ykk@rock-chips.com>
2015-09-30 5:17 ` [PATCH v5 02/17] drm: bridge: analogix/dp: split exynos dp driver to bridge directory Krzysztof Kozlowski
2015-09-30 6:48 ` Yakir Yang
2015-10-07 6:25 ` [PATCH v5 0/17] Add Analogix Core Display Port Driver Yakir Yang
2015-10-07 8:46 ` Javier Martinez Canillas
2015-10-07 9:02 ` Yakir Yang
2015-10-07 9:26 ` Javier Martinez Canillas
[not found] ` <5614FC6B.4080702@rock-chips.com>
2015-10-07 11:25 ` Javier Martinez Canillas
2015-10-08 0:40 ` Yakir Yang
2015-10-10 14:31 ` Yakir Yang
2015-10-13 9:21 ` Javier Martinez Canillas
2015-10-13 13:50 ` Yakir Yang
2015-10-14 8:18 ` Javier Martinez Canillas
2015-10-10 15:35 ` [PATCH v6 " Yakir Yang
2015-10-10 15:38 ` [PATCH v6 01/17] drm: exynos: dp: convert to drm bridge mode Yakir Yang
2015-10-10 15:41 ` [PATCH v6 03/17] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-10-10 15:43 ` [PATCH v6 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-10-10 15:46 ` [PATCH v6 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-10-12 0:37 ` Yakir Yang
2015-10-12 0:49 ` Krzysztof Kozlowski
2015-10-12 2:43 ` Yakir Yang
2015-10-12 3:51 ` Krzysztof Kozlowski
2015-10-12 4:09 ` Yakir Yang
2015-10-12 4:16 ` Krzysztof Kozlowski
2015-10-10 15:49 ` [PATCH v6 06/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-10-10 15:49 ` [PATCH v6 07/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-10-10 15:51 ` [PATCH v6 08/17] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-10-10 15:53 ` [PATCH v6 09/17] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-10-10 15:55 ` [PATCH v6 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-10-12 15:02 ` Kishon Vijay Abraham I
2015-10-12 16:18 ` Heiko Stübner
2015-10-13 1:20 ` Yakir Yang
2015-10-10 15:58 ` [PATCH v6 11/17] Documentation: phy: add document for rockchip dp phy Yakir Yang
2015-10-12 22:28 ` Kishon Vijay Abraham I
2015-10-13 1:21 ` Yakir Yang
2015-10-10 16:00 ` [PATCH v6 12/17] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-10-10 16:05 ` [PATCH v6 13/17] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-10-10 16:05 ` [PATCH v6 14/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-10-10 16:05 ` [PATCH v6 15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-10-10 16:05 ` [PATCH v6 16/17] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-10-10 16:06 ` [PATCH v6 17/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
2015-10-12 4:29 ` [PATCH v7 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-10-12 6:54 ` Krzysztof Kozlowski
2015-10-12 7:20 ` Yakir Yang
2015-10-19 10:40 ` [PATCH v6 0/17] Add Analogix Core Display Port Driver Javier Martinez Canillas
2015-10-20 2:10 ` Yakir Yang
2015-10-20 9:48 ` Javier Martinez Canillas
2015-10-20 11:40 ` Yakir Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=560B73D4.30109@samsung.com \
--to=k.kozlowski@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox