Subject: [PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS

From: [email-masked] (Stephen Boyd)
Date: Thu, 8 Oct 2015 11:16:35 -0700

On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
> This patch enables spi buses on low speed and high speed expansion
> connectors on DB410C
>
> Signed-off-by: Srinivas Kandagatla <[email-masked]>
> ---
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 3581272..d872654 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -92,11 +92,21 @@
>  	status = "okay";
>  };
>  
> +&blsp_spi3 {
> +	/* On High speed expansion */
> +	status = "okay";
> +};
> +
>  &blsp_i2c4 {
>  	/* On High speed expansion */
>  	status = "okay";
>  };
>  
> +&blsp_spi5 {
> +	/* On Low speed expansion */
> +	status = "okay";
> +};
> +
>  &blsp_i2c6 {
>  	/* On Low speed expansion */
>  	status = "okay";

We've been using absolute nodes to mark device nodes as status = "okay".
Can we keep doing that here please?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project