Subject: [PATCH 4/5] arm: dts: lpc32xx: remove unneeded cell settings from cpus

From: [email-masked] (Vladimir Zapolskiy)
Date: Tue, 13 Oct 2015 13:03:05 +0300

Hi Joachim,

On 13.10.2015 11:18, Joachim Eastwood wrote:
> Hi Vladimir,
> 
> On 13 October 2015 at 01:54, Vladimir Zapolskiy <[email-masked]> wrote:
>> There is no addressable devices under cpus device node, remove noisy
>> address and size cells properties.
>>
>> Signed-off-by: Vladimir Zapolskiy <[email-masked]>
>> ---
>>  arch/arm/boot/dts/lpc32xx.dtsi | 3 ---
>>  1 file changed, 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
>> index dcb52cb..929458d 100644
>> --- a/arch/arm/boot/dts/lpc32xx.dtsi
>> +++ b/arch/arm/boot/dts/lpc32xx.dtsi
>> @@ -18,9 +18,6 @@
>>         interrupt-parent = <&mic>;
>>
>>         cpus {
>> -               #address-cells = <0>;
>> -               #size-cells = <0>;
>> -
> 
> According to Documentation/devicetree/bindings/arm/cpus.txt these
> properties are required.
> 
> Take a look at Example 3 in the doc for it should look like on a ARM
> 926EJ-S uniprocessor 32-bit system.

thank you for review and pointing the fact out, then according to
documentation #address-cells must be set to 1 plus reg property in cpu
node is missing, I'll send a fix as patch v2 4/5.

--
With best wishes,
Vladimir