Subject: [PATCH 7/7] ARM: EXYNOS: Remove code for restart and poweroff for exynos SoCs

From: [email-masked] (Krzysztof Kozlowski)
Date: Mon, 19 Oct 2015 16:00:08 +0900

On 19.10.2015 15:03, Alim Akhtar wrote:
> Now we can use the generic syscon-{reboot/poweroff} drivers,
> so we don't need special handling for reboot/poweroff in
> exynos pmu driver. This patch remove the same.
> 
> Signed-off-by: Alim Akhtar <[email-masked]>
> ---
>  arch/arm/mach-exynos/pmu.c |   43 -------------------------------------------
>  1 file changed, 43 deletions(-)

I think that removal of this stuff will effectively remove the
restart/poweroff handlers from:
1. Other defconfigs, like multi_v7
2. Custom configs.

Previously this code was always compiled in for ARCH_EXYNOS. Now it is
not so I am thinking about selecting necessary drivers from main exynos
Kconfig symbol. That could be tricky though, because "select" should be
used only for non-visible symbols.

Any ideas how to solve that?

Best regards,
Krzysztof

> 
> diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
> index de68938ee6aa..393c04aa727e 100644
> --- a/arch/arm/mach-exynos/pmu.c
> +++ b/arch/arm/mach-exynos/pmu.c
> @@ -14,9 +14,6 @@
>  #include <linux/of_address.h>
>  #include <linux/platform_device.h>
>  #include <linux/delay.h>
> -#include <linux/notifier.h>
> -#include <linux/reboot.h>
> -
>  
>  #include "exynos-pmu.h"
>  #include "regs-pmu.h"
> @@ -681,23 +678,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = {
>  	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
>  };
>  
> -static void exynos_power_off(void)
> -{
> -	unsigned int tmp;
> -
> -	pr_info("Power down.\n");
> -	tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
> -	tmp ^= (1 << 8);
> -	pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
> -
> -	/* Wait a little so we don't give a false warning below */
> -	mdelay(100);
> -
> -	pr_err("Power down failed, please power off system manually.\n");
> -	while (1)
> -		;
> -}
> -
>  static void exynos5420_powerdown_conf(enum sys_powerdown mode)
>  {
>  	u32 this_cluster;
> @@ -875,14 +855,6 @@ static void exynos5420_pmu_init(void)
>  	pr_info("EXYNOS5420 PMU initialized\n");
>  }
>  
> -static int pmu_restart_notify(struct notifier_block *this,
> -		unsigned long code, void *unused)
> -{
> -	pmu_raw_writel(0x1, EXYNOS_SWRESET);
> -
> -	return NOTIFY_DONE;
> -}
> -
>  static const struct exynos_pmu_data exynos3250_pmu_data = {
>  	.pmu_config	= exynos3250_pmu_config,
>  	.pmu_init	= exynos3250_pmu_init,
> @@ -940,20 +912,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
>  	{ /*sentinel*/ },
>  };
>  
> -/*
> - * Exynos PMU restart notifier, handles restart functionality
> - */
> -static struct notifier_block pmu_restart_handler = {
> -	.notifier_call = pmu_restart_notify,
> -	.priority = 128,
> -};
> -
>  static int exynos_pmu_probe(struct platform_device *pdev)
>  {
>  	const struct of_device_id *match;
>  	struct device *dev = &pdev->dev;
>  	struct resource *res;
> -	int ret;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	pmu_base_addr = devm_ioremap_resource(dev, res);
> @@ -978,12 +941,6 @@ static int exynos_pmu_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, pmu_context);
>  
> -	ret = register_restart_handler(&pmu_restart_handler);
> -	if (ret)
> -		dev_warn(dev, "can't register restart handler err=%d\n", ret);
> -
> -	pm_power_off = exynos_power_off;
> -
>  	dev_dbg(dev, "Exynos PMU Driver probe done\n");
>  	return 0;
>  }
>