Subject: [PATCH v8 06/17] dt-bindings: add document for analogix display port driver

From: [email-masked] (Yakir Yang)
Date: Thu, 29 Oct 2015 09:12:21 +0800

Hi Heiko,

On 10/29/2015 04:02 AM, Heiko Stuebner wrote:
> Hi Yakir,
>
> Am Mittwoch, 28. Oktober 2015, 16:26:33 schrieb Yakir Yang:
>> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> index 7a3a9cd..9905081 100644
>> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
>> @@ -31,45 +31,31 @@ Required properties for dp-controller:
>>   		from general PHY binding: the phandle for the PHY device.
>>   	-phy-names:
>>   		from general PHY binding: Should be "dp".
>> -	-samsung,color-space:
>> -		input video data format.
>> -			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
>> -	-samsung,dynamic-range:
>> -		dynamic range for input video data.
>> -			VESA = 0, CEA = 1
>> -	-samsung,ycbcr-coeff:
>> -		YCbCr co-efficients for input video.
>> -			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
>> -	-samsung,color-depth:
>> -		number of bits per colour component.
>> -			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
>> -	-samsung,link-rate:
>> -		link rate supported by the panel.
>> -			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
>> -	-samsung,lane-count:
>> -		number of lanes supported by the panel.
>> -			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
>> -	- display-timings: timings for the connected panel as described by
>> -		Documentation/devicetree/bindings/video/display-timing.txt
> 											^^ display/display-timings.txt
> otherwise this patch does not apply.

I thought I have deleted this old path of "display-timing.txt", and 
changed it to

-		Documentation/devicetree/bindings/video/display-timing.txt

+		Documentation/devicetree/bindings/display/panel/display-timing.txt

And the real path of "display-timing.txt" in linux-next [tag 20151022] 
do under
the "display/panel/", those change should be right.

Thanks,
- Yakir