From: kapilh@broadcom•com (Kapil Hali)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 1/4] dt-bindings: add SMP enable-method for Broadcom NSP
Date: Tue, 10 Nov 2015 21:56:17 +0530 [thread overview]
Message-ID: <56421AA9.5010106@broadcom.com> (raw)
In-Reply-To: <CAL_JsqL4FqEFN848eZjnnCj_1N7C1K1OkzFHLVxgG5srHpdGEw@mail.gmail.com>
Hi Rob,
On 11/7/2015 11:33 PM, Rob Herring wrote:
> On Fri, Nov 6, 2015 at 3:11 PM, Kapil Hali <kapilh@broadcom•com> wrote:
>> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
>> Northstar Plus CPU to the 32-bit ARM CPU device tree binding
>> documentation file and create a new binding documentation for
>> Northstar Plus CPU.
>>
>> Signed-off-by: Kapil Hali <kapilh@broadcom•com>
>> ---
>> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 36 ++++++++++++++++++++++
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> 2 files changed, 37 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
>> new file mode 100644
>> index 0000000..8506da7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
>> @@ -0,0 +1,36 @@
>> +Broadcom Northstar Plus SoC CPU Enable Method
>> +---------------------------------------------
>> +This binding defines the enable method used for starting secondary
>> +CPUs in the following Broadcom SoCs:
>> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
>> +
>> +The enable method is specified by defining the following required
>> +properties in the "cpus" device tree node:
>> + - enable-method = "brcm,bcm-nsp-smp";
>
> As I said already, this is supposed to be per cpu.
>
>> + - secondary-boot-reg = <...>;
>
> And then you might as well move this too.
>
NS/NSP family of SoCs have maximum of two cores. There would not be a
need for another boot-reg in this family of SoCs. However, I agree, it
should go to individual CPU nodes. I will do the change in the next patch.
>> +
>> +The secondary-boot-reg property is a u32 value that specifies the
>> +physical address of the register used to request the ROM holding pen
>> +code release a secondary CPU.
>> +
>> +Example:
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + enable-method = "brcm,bcm-nsp-smp";
>> + secondary-boot-reg = <0xffff042c>;
>> +
>> + cpu0: cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + next-level-cache = <&L2>;
>> + reg = <0>;
>> + };
>> +
>> + cpu1: cpu at 1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + next-level-cache = <&L2>;
>> + reg = <1>;
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
>> index 91e6e5c..6abe3f3 100644
>> --- a/Documentation/devicetree/bindings/arm/cpus.txt
>> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
>> @@ -191,6 +191,7 @@ nodes to be present and contain the properties described below.
>> "allwinner,sun8i-a23"
>> "arm,psci"
>> "brcm,brahma-b15"
>> + "brcm,bcm-nsp-smp"
>> "marvell,armada-375-smp"
>> "marvell,armada-380-smp"
>> "marvell,armada-390-smp"
>> --
>> 2.1.0
>>
Thanks,
Kapil Hali
next prev parent reply other threads:[~2015-11-10 16:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-06 21:11 [PATCH v3 0/4] SMP support for Broadcom NSP Kapil Hali
2015-11-06 21:11 ` [PATCH v3 1/4] dt-bindings: add SMP enable-method " Kapil Hali
2015-11-07 18:03 ` Rob Herring
2015-11-10 16:26 ` Kapil Hali [this message]
2015-11-07 21:40 ` Florian Fainelli
2015-11-08 17:31 ` Russell King - ARM Linux
2015-11-08 19:36 ` Florian Fainelli
2015-11-10 16:03 ` Kapil Hali
2015-11-10 16:25 ` Russell King - ARM Linux
2015-11-12 12:37 ` Kapil Hali
2015-11-10 16:07 ` Kapil Hali
2015-11-06 21:11 ` [PATCH v3 2/4] ARM: dts: add SMP support " Kapil Hali
2015-11-06 21:11 ` [PATCH v3 3/4] ARM: BCM: Add " Kapil Hali
2015-11-06 21:11 ` [PATCH v3 4/4] ARM: BCM: Add SMP support for Broadcom 4708 Kapil Hali
2015-11-06 21:42 ` Hauke Mehrtens
2015-11-06 22:54 ` Jon Mason
2015-11-06 23:27 ` Hauke Mehrtens
2015-11-06 23:41 ` Hauke Mehrtens
2015-11-09 15:29 ` Jon Mason
2015-11-06 23:16 ` Scott Branden
2015-11-06 21:26 ` [PATCH v3 0/4] SMP support for Broadcom NSP Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56421AA9.5010106@broadcom.com \
--to=kapilh@broadcom$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox