From: uri.mashiach@compulab•co.il (Uri Mashiach)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/6] ARM: OMAP2+: dts: cm-t335: add support for MMC
Date: Wed, 11 Nov 2015 19:33:06 +0200 [thread overview]
Message-ID: <56437BD2.7070404@compulab.co.il> (raw)
In-Reply-To: <1445948100-16446-5-git-send-email-uri.mashiach@compulab.co.il>
Gentle ping
On 27/10/15 14:14, Uri Mashiach wrote:
> From: Ilya Ledvich <ilya@compulab•co.il>
>
> Add pinmux configuration for MMC0 pins.
> Add fixed regulator 'vmmc_fixed'.
> Enable MMC0 in 4-bit mode.
>
> Acked-by: Igor Grinberg <grinberg@compulab•co.il>
> Signed-off-by: Ilya Ledvich <ilya@compulab•co.il>
> Signed-off-by: Uri Mashiach <uri.mashiach@compulab•co.il>
> ---
> arch/arm/boot/dts/am335x-cm-t335.dts | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
> index 9d6117a..976c330 100644
> --- a/arch/arm/boot/dts/am335x-cm-t335.dts
> +++ b/arch/arm/boot/dts/am335x-cm-t335.dts
> @@ -31,6 +31,14 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + /* regulator for mmc */
> + vmmc_fixed: fixedregulator at 0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vmmc_fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> };
>
> &am33xx_pinmux {
> @@ -104,6 +112,23 @@
> 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)
> >;
> };
> +
> + mmc1_pins: pinmux_mmc1_pins {
> + pinctrl-single,pins = <
> + /* mmc0_dat3.mmc0_dat3 */
> + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* mmc0_dat2.mmc0_dat2 */
> + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* mmc0_dat1.mmc0_dat1 */
> + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* mmc0_dat0.mmc0_dat0 */
> + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* mmc0_clk.mmc0_clk */
> + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* mmc0_cmd.mmc0_cmd */
> + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0)
> + >;
> + };
> };
>
> &uart0 {
> @@ -203,3 +228,11 @@
> status = "okay";
> };
>
> +&mmc1 {
> + status = "okay";
> + vmmc-supply = <&vmmc_fixed>;
> + bus-width = <4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> +};
> +
>
next prev parent reply other threads:[~2015-11-11 17:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-27 12:14 [PATCH 0/6] ARM: OMAP2+: dts: cm-t335: initial support Uri Mashiach
2015-10-27 12:14 ` [PATCH 1/6] ARM: OMAP2+: dts: cm-t335: add " Uri Mashiach
2015-11-11 17:32 ` Uri Mashiach
2015-11-13 10:19 ` Igor Grinberg
2015-10-27 12:14 ` [PATCH 2/6] ARM: OMAP2+: dts: cm-t335: add basic support for I2C Uri Mashiach
2015-11-11 17:32 ` Uri Mashiach
2015-10-27 12:14 ` [PATCH 3/6] ARM: OMAP2+: dts: cm-t335: add support for NAND flash Uri Mashiach
2015-11-11 17:32 ` Uri Mashiach
2015-10-27 12:14 ` [PATCH 4/6] ARM: OMAP2+: dts: cm-t335: add support for MMC Uri Mashiach
2015-11-11 17:33 ` Uri Mashiach [this message]
2015-10-27 12:14 ` [PATCH 5/6] ARM: OMAP2+: dts: cm-t335: add support for network device Uri Mashiach
2015-10-27 13:14 ` Mugunthan V N
2015-11-11 17:33 ` Uri Mashiach
2015-10-27 12:15 ` [PATCH 6/6] ARM: OMAP2+: dts: cm-t335: add support for PWM backlight Uri Mashiach
2015-11-11 17:33 ` Uri Mashiach
2015-11-11 17:32 ` [PATCH 0/6] ARM: OMAP2+: dts: cm-t335: initial support Uri Mashiach
2015-11-11 17:50 ` Tony Lindgren
2015-11-24 14:02 ` [PATCH v2 " Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 1/6] ARM: OMAP2+: dts: cm-t335: add " Uri Mashiach
2015-11-25 22:44 ` Rob Herring
2015-11-30 19:51 ` Tony Lindgren
2015-12-02 10:44 ` Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 2/6] ARM: OMAP2+: dts: cm-t335: add basic support for I2C Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 3/6] ARM: OMAP2+: dts: cm-t335: add support for NAND flash Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 4/6] ARM: OMAP2+: dts: cm-t335: add support for MMC Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 5/6] ARM: OMAP2+: dts: cm-t335: add support for network device Uri Mashiach
2015-11-24 14:02 ` [PATCH v2 6/6] ARM: OMAP2+: dts: cm-t335: add support for PWM backlight Uri Mashiach
2015-12-13 8:55 ` [PATCH 0/5] ARM: dts: cm-t335: add peripheral support Uri Mashiach
2015-12-13 8:55 ` [PATCH 1/5] ARM: dts: cm-t335: add support for USB0 Uri Mashiach
2015-12-13 8:55 ` [PATCH 2/5] ARM: dts: cm-t335: add support for SBC-T335 Uri Mashiach
2015-12-14 1:25 ` Rob Herring
2015-12-17 18:05 ` Tony Lindgren
2015-12-13 8:55 ` [PATCH 3/5] ARM: dts: cm-t335: add support for I2C GPIO expander Uri Mashiach
2015-12-13 8:55 ` [PATCH 4/5] ARM: dts: cm-t335: add support for DVI/LCD Uri Mashiach
2015-12-13 8:55 ` [PATCH 5/5] ARM: dts: cm-t335: add support for bluetooth Uri Mashiach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56437BD2.7070404@compulab.co.il \
--to=uri.mashiach@compulab$(echo .)co.il \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox