Subject: arm64: dts: qcom: Add apq8096 dragonboard dts skeletons

From: [email-masked] (Rajendra Nayak)
Date: Tue, 01 Dec 2015 08:31:23 +0530

On 12/01/2015 05:18 AM, Stephen Boyd wrote:
> On 11/26, Rajendra Nayak wrote:
>> Add new dtsi and dts files for the apq8096 dragonboards with just
>> a serial device used as debug console
>>
>> Signed-off-by: Rajendra Nayak <[email-masked]>
>> ---
>> Patch applies on top of Stephens' patches to add msm8996 dtsi
>> https://lkml.org/lkml/2015/11/17/955
>>
>>  arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
>>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
>>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
>>  3 files changed, 52 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
>>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index fa1f661..bd992ef 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -1,5 +1,5 @@
>>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
>> -dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb
> 
> We should move to one dtb per line in this file. Other platforms
> are doing the same thing.

Sure, will repost with the change. I just saw the 8916/8016 ones were all in
a single line so did the same.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation