Subject: [PATCH v2 10/10] drm/hisilicon: Add support for external bridge

From: [email-masked] (Archit Taneja)
Date: Tue, 1 Dec 2015 14:34:35 +0530

On 11/28/2015 04:09 PM, Xinliang Liu wrote:
> Add support for external HDMI bridge.
>
> Signed-off-by: Xinliang Liu <[email-masked]>
> Signed-off-by: Xinwei Kong <[email-masked]>
> Signed-off-by: Andy Green <[email-masked]>
> ---
>   drivers/gpu/drm/hisilicon/hisi_drm_dsi.c | 51 ++++++++++++++++++++++++++++++++
>   1 file changed, 51 insertions(+)
>
> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c b/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
> index 066e08d..9e056db 100644
> --- a/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
> @@ -78,6 +78,7 @@ struct dsi_hw_ctx {
>
>   struct hisi_dsi {
>   	struct drm_encoder encoder;
> +	struct drm_bridge *bridge;
>   	struct mipi_dsi_host host;
>   	struct drm_display_mode cur_mode;
>   	struct dsi_hw_ctx *ctx;
> @@ -671,6 +672,25 @@ static int dsi_host_init(struct device *dev, struct hisi_dsi *dsi)
>   	return 0;
>   }
>
> +static int dsi_bridge_init(struct drm_device *dev, struct hisi_dsi *dsi)
> +{
> +	struct drm_encoder *encoder = &dsi->encoder;
> +	struct drm_bridge *bridge = dsi->bridge;
> +	int ret;
> +
> +	/* associate the bridge to dsi encoder */
> +	encoder->bridge = bridge;
> +	bridge->encoder = encoder;
> +
> +	ret = drm_bridge_attach(dev, bridge);
> +	if (ret) {
> +		DRM_ERROR("failed to attach exteranl bridge\n");

s/exteranl/external

> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
>   static int dsi_bind(struct device *dev, struct device *master, void *data)
>   {
>   	struct dsi_data *ddata = dev_get_drvdata(dev);
> @@ -686,6 +706,10 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
>   	if (ret)
>   		return ret;
>
> +	ret = dsi_bridge_init(drm_dev, dsi);
> +	if (ret)
> +		return ret;
> +
>   	return 0;
>   }
>
> @@ -702,8 +726,35 @@ static const struct component_ops dsi_ops = {
>   static int dsi_parse_dt(struct platform_device *pdev, struct hisi_dsi *dsi)
>   {
>   	struct dsi_hw_ctx *ctx = dsi->ctx;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device_node *endpoint, *bridge_node;
> +	struct drm_bridge *bridge;
>   	struct resource *res;
>
> +	/*
> +	 * Get the endpoint node. In our case, dsi has one output port
> +	 * to which the external HDMI bridge is connected.
> +	 */
> +	endpoint = of_graph_get_next_endpoint(np, NULL);
> +	if (!endpoint) {
> +		DRM_ERROR("no valid endpoint node\n");
> +		return -ENODEV;
> +	}
> +	of_node_put(endpoint);
> +
> +	bridge_node = of_graph_get_remote_port_parent(endpoint);
> +	if (!bridge_node) {
> +		DRM_ERROR("no valid bridge node\n");
> +		return -ENODEV;
> +	}
> +	of_node_put(bridge_node);
> +
> +	bridge = of_drm_find_bridge(bridge_node);
> +	if (!bridge) {
> +		DRM_INFO("wait for external HDMI bridge driver.\n");
> +		return -EPROBE_DEFER;
> +	}
> +	dsi->bridge = bridge;

This could be left for later, but it would be better if the dsi driver
registers even if the bridge driver module isn't inserted yet, or
happens much later in boot.

We could achieve this by trying to attach the bridge (done in 
dsi_bridge_init) in the dsi_host_attach callback instead of having it
in dsi_bind.

Thanks,
Archit

>
>   	ctx->dsi_cfg_clk = devm_clk_get(&pdev->dev, "pclk_dsi");
>   	if (IS_ERR(ctx->dsi_cfg_clk)) {
>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation