From: k.kozlowski@samsung•com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Date: Wed, 13 Jan 2016 10:46:06 +0900 [thread overview]
Message-ID: <5695AC5E.9000804@samsung.com> (raw)
In-Reply-To: <1452592015-22173-2-git-send-email-wenyou.yang@atmel.com>
On 12.01.2016 18:46, Wenyou Yang wrote:
> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
> - Regulator
> - Charger
>
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel•com>
> ---
>
> Changes in v3: None
> Changes in v2:
> - add more help information in Kconfig.
> - update the file header with short version license and author line.
> - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> - use more explicit info to indicate the failure to add sub devices.
> - remove the unnecessary print out.
> - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
>
> drivers/mfd/Kconfig | 11 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/act8945a.h | 21 ++++++++
> 4 files changed, 142 insertions(+)
> create mode 100644 drivers/mfd/act8945a.c
> create mode 100644 include/linux/mfd/act8945a.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..34375a9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
> This is the core driver for CS5535/CS5536 MFD functions. This is
> necessary for using the board's GPIO and MFGPT functionality.
>
> +config MFD_ACT8945A
> + bool "Active-semi ACT8945A"
> + select MFD_CORE
> + select REGMAP_I2C
> + depends on I2C && OF
> + help
> + Support for the ACT8945A PMIC from Active-semi. This device
> + features three step-down DC/DC converters and four low-dropout
> + linear regulators, along with a complete ActivePath battery
> + charger.
> +
> config MFD_AS3711
> bool "AMS AS3711"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
> obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
> obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> obj-$(CONFIG_MFD_SM501) += sm501.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..7f8c50a
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,109 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.
> + *
> + * Author: Wenyou Yang <wenyou.yang@atmel•com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/act8945a.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +static const struct mfd_cell act8945a_devs[] = {
> + {
> + .name = "act8945a-pmic",
> + .of_compatible = "active-semi,act8945a-regulator",
> + },
> + {
> + .name = "act8945a-charger",
> + .of_compatible = "active-semi,act8945a-charger",
> + },
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct act8945a_dev *act8945a;
> + int ret;
> +
> + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> + if (!act8945a)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, act8945a);
> +
> + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
> + if (IS_ERR(act8945a->regmap)) {
> + ret = PTR_ERR(act8945a->regmap);
> + dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
> + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> + if (ret) {
> + dev_err(&i2c->dev, "Failed to add sub devices\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> + mfd_remove_devices(&i2c->dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> + { "act8945a", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> + {.compatible = "active-semi,act8945a", },
Nit: a space before .compatible
Overall it looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung•com>
Best regards,
Krzysztof
next prev parent reply other threads:[~2016-01-13 1:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 9:46 [PATCH v3 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang
2016-01-12 9:46 ` [PATCH v3 1/2] " Wenyou Yang
2016-01-13 1:46 ` Krzysztof Kozlowski [this message]
2016-01-13 3:48 ` Yang, Wenyou
2016-01-12 9:46 ` [PATCH v3 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5695AC5E.9000804@samsung.com \
--to=k.kozlowski@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox