Subject: [PATCH v3 4/8] dt-bindings: Add a binding for Mediatek Video Encoder

From: [email-masked] (Matthias Brugger)
Date: Mon, 18 Jan 2016 10:40:49 +0100

On 04/01/16 11:11, Tiffany Lin wrote:
> Add a DT binding documentation of Video Encoder for the
> MT8173 SoC from Mediatek.
>
> Signed-off-by: Tiffany Lin <[email-masked]>
> ---
>   .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
>   1 file changed, 58 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> new file mode 100644
> index 0000000..5cc35ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> @@ -0,0 +1,58 @@
> +Mediatek Video Codec
> +
> +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> +supports high resolution encoding functionalities.
> +
> +Required properties:
> +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
> +- reg : Physical base address of the video codec registers and length of
> +  memory mapped region.
> +- interrupts : interrupt number to the cpu.
> +- mediatek,larb : must contain the local arbiters in the current Socs.
> +- clocks : list of clock specifiers, corresponding to entries in
> +  the clock-names property;
> +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
> +- iommus : list of iommus specifiers should be enabled for hw encode.
> +  There are 2 cells needed to enable/disable iommu.
> +  The first one is local arbiter index(larbid), and the other is port
> +  index(portid) within local arbiter. Specifies the larbid and portid
> +  as defined in dt-binding/memory/mt8173-larb-port.h.

iommus have only one cell, as in the example below. Please fix the 
binding description accordingly.

Regards,
Matthias

> +- mediatek,vpu : the node of video processor unit
> +
> +Example:
> +vcodec_enc: vcodec at 0x18002000 {
> +    compatible = "mediatek,mt8173-vcodec-enc";
> +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
> +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
> +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> +    mediatek,larb = <&larb3>,
> +		    <&larb5>;
> +    iommus = <&iommu M4U_PORT_VENC_RCPU>,
> +             <&iommu M4U_PORT_VENC_REC>,
> +             <&iommu M4U_PORT_VENC_BSDMA>,
> +             <&iommu M4U_PORT_VENC_SV_COMV>,
> +             <&iommu M4U_PORT_VENC_RD_COMV>,
> +             <&iommu M4U_PORT_VENC_CUR_LUMA>,
> +             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
> +             <&iommu M4U_PORT_VENC_REF_LUMA>,
> +             <&iommu M4U_PORT_VENC_REF_CHROMA>,
> +             <&iommu M4U_PORT_VENC_NBM_RDMA>,
> +             <&iommu M4U_PORT_VENC_NBM_WDMA>,
> +             <&iommu M4U_PORT_VENC_RCPU_SET2>,
> +             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
> +             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
> +             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
> +             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
> +             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
> +             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
> +             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
> +             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
> +    mediatek,vpu = <&vpu>;
> +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
> +             <&topckgen CLK_TOP_VENC_LT_SEL>,
> +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
> +    clock-names = "vencpll",
> +                  "venc_lt_sel",
> +                  "vcodecpll_370p5_ck";
> +  };
>