Subject: [PATCH 10/19] arm64: kvm: allows kvm cpu hotplug

From: [email-masked] (James Morse)
Date: Tue, 26 Jan 2016 17:42:48 +0000

Hi!

On 15/01/16 19:18, Geoff Levand wrote:
> From: AKASHI Takahiro <[email-masked]>
> 
> The current kvm implementation on arm64 does cpu-specific initialization
> at system boot, and has no way to gracefully shutdown a core in terms of
> kvm. This prevents, especially, kexec from rebooting the system on a boot
> core in EL2.
> 
> This patch adds a cpu tear-down function and also puts an existing cpu-init
> code into a separate function, kvm_arch_hardware_disable() and
> kvm_arch_hardware_enable() respectively.
> We don't need arm64-specific cpu hotplug hook any more.
> 
> Since this patch modifies common part of code between arm and arm64, one
> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid
> compiling errors.
> 
> Signed-off-by: AKASHI Takahiro <[email-masked]>

> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index e06fd29..e91f80e 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c

>  #ifdef CONFIG_CPU_PM
>  static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
>  				    unsigned long cmd,
>  				    void *v)
>  {
> -	if (cmd == CPU_PM_EXIT &&
> -	    __hyp_get_vectors() == hyp_default_vectors) {
> -		cpu_init_hyp_mode(NULL);
> +	switch (cmd) {
> +	case CPU_PM_ENTER:
> +		if (__this_cpu_read(kvm_arm_hardware_enabled))
> +			cpu_reset_hyp_mode();
> +
>  		return NOTIFY_OK;
> -	}
> +	case CPU_PM_EXIT:
> +		if (__this_cpu_read(kvm_arm_hardware_enabled))
> +			cpu_init_hyp_mode();

I read this as:
		if (enabled)
			enable();

What am I missing? Is there a missing '!'?

[/me thinks some more]

I suspect this is trying to be clever: leaving the flag set over a
deep-sleep, to indicate that the hardware should be re-enabled when we
resume... if so, a comment to that effect would be good.

>  
> -	return NOTIFY_DONE;
> +		return NOTIFY_OK;
> +
> +	default:
> +		return NOTIFY_DONE;
> +	}
>  }
>  
>  static struct notifier_block hyp_init_cpu_pm_nb = {

> diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
> index 3070096..bca79f9 100644
> --- a/arch/arm64/include/asm/virt.h
> +++ b/arch/arm64/include/asm/virt.h
> @@ -58,9 +58,18 @@
>  
>  #define HVC_CALL_FUNC 3
>  
> +/*
> + * HVC_RESET_CPU - Reset cpu in EL2 to initial state.
> + *
> + * @x0: entry address in trampoline code in va
> + * @x1: identical mapping page table in pa
> + */
> +
>  #define BOOT_CPU_MODE_EL1	(0xe11)
>  #define BOOT_CPU_MODE_EL2	(0xe12)
>  
> +#define HVC_RESET_CPU 4
> +

Patch 5 added a fancy new way to call arbitrary functions at el2, why
not use that? (it would save beating up el1_sync again).

I agree the trampoline stuff is complicated - I will try and cook-up a
version of this patch for hibernate that does this. (... and comment
what I think is happening above while I'm at it)

>  #ifndef __ASSEMBLY__
>  
>  /*
> diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
> index 1d7e502..d909ce2 100644
> --- a/arch/arm64/kvm/hyp-init.S
> +++ b/arch/arm64/kvm/hyp-init.S
> @@ -140,6 +140,39 @@ merged:
>  	eret
>  ENDPROC(__kvm_hyp_init)
>  
> +	/*
> +	 * x0: HYP boot pgd
> +	 * x1: HYP phys_idmap_start
> +	 */
> +ENTRY(__kvm_hyp_reset)
> +	/* We're in trampoline code in VA, switch back to boot page tables */
> +	msr	ttbr0_el2, x0
> +	isb
> +
> +	/* Invalidate the old TLBs */
> +	tlbi	alle2
> +	dsb	sy
> +
> +	/* Branch into PA space */
> +	adr	x0, 1f
> +	bfi	x1, x0, #0, #PAGE_SHIFT
> +	br	x1
> +
> +	/* We're now in idmap, disable MMU */
> +1:	mrs	x0, sctlr_el2
> +	ldr	x1, =SCTLR_ELx_FLAGS
> +	bic	x0, x0, x1		// Clear SCTL_M and etc
> +	msr	sctlr_el2, x0
> +	isb
> +
> +	/* Install stub vectors */
> +	adrp	x0, __hyp_stub_vectors
> +	add	x0, x0, #:lo12:__hyp_stub_vectors

adr_l ?

> +	msr	vbar_el2, x0
> +
> +	eret
> +ENDPROC(__kvm_hyp_reset)
> +
>  	.ltorg
>  
>  	.popsection
> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
> index 15b1ef9..ed82dc2 100644
> --- a/arch/arm64/kvm/hyp.S
> +++ b/arch/arm64/kvm/hyp.S
> @@ -986,10 +991,27 @@ el1_sync:					// Guest trapped into EL2
>  	cmp	x18, #HVC_GET_VECTORS
>  	b.ne	1f
>  	mrs	x0, vbar_el2
> -	b	2f
> -
> -1:	/* Default to HVC_CALL_HYP. */
> +	b	do_eret
>  
> +	/* jump into trampoline code */
> +1:	cmp	x18, #HVC_RESET_CPU
> +	b.ne	2f
> +	/*
> +	 * Entry point is:
> +	 *	TRAMPOLINE_VA
> +	 *	+ (__kvm_hyp_reset - (__hyp_idmap_text_start & PAGE_MASK))
> +	 */
> +	adrp	x2, __kvm_hyp_reset
> +	add	x2, x2, #:lo12:__kvm_hyp_reset
> +	adrp	x3, __hyp_idmap_text_start
> +	add	x3, x3, #:lo12:__hyp_idmap_text_start

adr_l ?

> +	and	x3, x3, PAGE_MASK
> +	sub	x2, x2, x3
> +	ldr	x3, =TRAMPOLINE_VA
> +	add	x2, x2, x3
> +	br	x2				// no return
> +
> +2:	/* Default to HVC_CALL_HYP. */
>  	push	lr, xzr
>  
>  	/*

Thanks,

James