From: vladimir.murzin@arm•com (Vladimir Murzin)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v3 09/10] ARM: dts: introduce MPS2 AN385/AN386
Date: Tue, 16 Feb 2016 15:37:31 +0000 [thread overview]
Message-ID: <56C3423B.5070307@arm.com> (raw)
In-Reply-To: <CACRpkdafDhT=1uJssVNAW+g05eXbRC1xUL+O0+SxcpdczUX0vQ@mail.gmail.com>
On 16/02/16 15:17, Linus Walleij wrote:
> On Tue, Feb 16, 2016 at 11:08 AM, Vladimir Murzin
> <vladimir.murzin@arm•com> wrote:
>
>> Application Notes 385 and 386 shares the same memory map and features
>> except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
>> is supplied with Cortex-M4.
>>
>> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm•com>
> (...)
>> + fpgaio {
>> + compatible = "syscon", "simple-mfd";
>> + reg = <0x40028000 0x10>;
>> +
>> + led at 0 {
>> + compatible = "register-bit-led";
>> + offset = <0x0>;
>> + mask = <0x01>;
>> + label = "userled:0";
>> + linux,default-trigger = "heartbeat";
>> + default-state = "on";
>> + };
>> +
>> + led at 1 {
>> + compatible = "register-bit-led";
>> + offset = <0x0>;
>> + mask = <0x02>;
>> + label = "userled:1";
>> + linux,default-trigger = "usr";
>> + default-state = "off";
>> + };
>> + };
>
> Thanks for using this. I worked hard to massage this into the
> core.
>
Thank you for pushing it, it cost me couple of minutes to make these
tiny leds alive :)
> Reviewed-by: Linus Walleij <linus.walleij@linaro•org>
>
Cheers!
Vladimir
> Yours,
> Linus Walleij
>
>
>
next prev parent reply other threads:[~2016-02-16 15:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-16 10:08 [PATCH v3 00/10] Support for Cortex-M Prototyping System Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 01/10] dt-bindings: document the MPS2 timer bindings Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 02/10] clockevents/drivers: add MPS2 Timer driver Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 03/10] dt-bindings: document the MPS2 UART bindings Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 04/10] serial: mps2-uart: add MPS2 UART driver Vladimir Murzin
2016-02-16 10:48 ` Andy Shevchenko
2016-02-16 14:25 ` Vladimir Murzin
2016-02-16 11:02 ` One Thousand Gnomes
2016-02-16 15:09 ` Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 05/10] serial: mps2-uart: add support for early console Vladimir Murzin
2016-02-16 10:36 ` Andy Shevchenko
2016-02-16 13:09 ` Vladimir Murzin
2016-02-16 13:13 ` Andy Shevchenko
2016-02-16 13:38 ` Vladimir Murzin
2016-02-16 14:00 ` Andy Shevchenko
2016-02-16 16:12 ` One Thousand Gnomes
2016-02-19 9:45 ` Vladimir Murzin
2016-02-19 9:57 ` Andy Shevchenko
2016-02-19 15:46 ` Peter Hurley
2016-02-19 16:27 ` Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 06/10] ARM: mps2: introduce MPS2 platform Vladimir Murzin
2016-02-16 10:56 ` Arnd Bergmann
2016-02-16 14:35 ` Vladimir Murzin
2016-02-16 14:39 ` Arnd Bergmann
2016-02-16 10:08 ` [PATCH v3 07/10] ARM: mps2: add low-level debug support Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 08/10] ARM: configs: add MPS2 defconfig Vladimir Murzin
2016-02-16 10:58 ` Arnd Bergmann
2016-02-16 14:51 ` Vladimir Murzin
2016-02-16 15:08 ` Arnd Bergmann
2016-02-16 15:14 ` Vladimir Murzin
2016-02-16 10:08 ` [PATCH v3 09/10] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
2016-02-16 11:01 ` Arnd Bergmann
2016-02-16 16:10 ` Vladimir Murzin
2016-02-17 16:48 ` Vladimir Murzin
2016-02-17 16:58 ` Arnd Bergmann
2016-02-18 10:11 ` Vladimir Murzin
2016-02-18 10:45 ` Arnd Bergmann
2016-02-18 11:13 ` Vladimir Murzin
2016-02-18 12:16 ` Arnd Bergmann
2016-02-18 12:47 ` Vladimir Murzin
2016-02-16 15:17 ` Linus Walleij
2016-02-16 15:37 ` Vladimir Murzin [this message]
2016-02-16 10:08 ` [PATCH v3 10/10] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
2016-02-16 11:05 ` [PATCH v3 00/10] Support for Cortex-M Prototyping System Arnd Bergmann
2016-02-16 16:14 ` Vladimir Murzin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C3423B.5070307@arm.com \
--to=vladimir.murzin@arm$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox