Subject: [PATCH 20/25] arm64:ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it

From: [email-masked] (Zhangjian (Bamvor))
Date: Tue, 10 May 2016 15:42:07 +0800

Hi, Yury

On 2016/5/6 20:37, Yury Norov wrote:
> On Fri, May 06, 2016 at 08:16:48PM +0800, Zhangjian (Bamvor) wrote:
>> Hi,
>>
>> On 2016/4/6 6:08, Yury Norov wrote:
>>> From: Andrew Pinski <[email-masked]>
>>>
>>> Add a separate syscall-table for ILP32, which dispatches either to native
>>> LP64 system call implementation or to compat-syscalls, as appropriate.
>>>
>>> Signed-off-by: Andrew Pinski <[email-masked]>
>>> Signed-off-by: Yury Norov <[email-masked]>
>>> ---
>>>   arch/arm64/include/asm/unistd.h | 11 ++++++-
>>>   arch/arm64/kernel/Makefile      |  2 +-
>>>   arch/arm64/kernel/entry.S       | 12 +++++++-
>>>   arch/arm64/kernel/sys_ilp32.c   | 65 +++++++++++++++++++++++++++++++++++++++++
>>>   4 files changed, 87 insertions(+), 3 deletions(-)
>>>   create mode 100644 arch/arm64/kernel/sys_ilp32.c
>>>
>>> diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
>>> index 2971dea..5ea18ef 100644
>>> --- a/arch/arm64/include/asm/unistd.h
>>> +++ b/arch/arm64/include/asm/unistd.h
>>> @@ -13,9 +13,18 @@
>>>    * You should have received a copy of the GNU General Public License
>>>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>>>    */
>>> +
>>> +#ifdef CONFIG_COMPAT
>>> +#define __ARCH_WANT_COMPAT_STAT64
>>> +#endif
>>> +
>>> +#ifdef CONFIG_ARM64_ILP32
>>> +#define __ARCH_WANT_COMPAT_SYS_PREADV64
>>> +#define __ARCH_WANT_COMPAT_SYS_PWRITEV64
>>> +#endif
>>> +
>>>   #ifdef CONFIG_AARCH32_EL0
>>>   #define __ARCH_WANT_COMPAT_SYS_GETDENTS64
>>> -#define __ARCH_WANT_COMPAT_STAT64
>>>   #define __ARCH_WANT_SYS_GETHOSTNAME
>>>   #define __ARCH_WANT_SYS_PAUSE
>>>   #define __ARCH_WANT_SYS_GETPGRP
>>> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
>>> index 9dfdf86..7aa65ea 100644
>>> --- a/arch/arm64/kernel/Makefile
>>> +++ b/arch/arm64/kernel/Makefile
>>> @@ -28,7 +28,7 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE
>>>   arm64-obj-$(CONFIG_AARCH32_EL0)		+= sys32.o kuser32.o signal32.o 	\
>>>   					   sys_compat.o entry32.o		\
>>>   					   ../../arm/kernel/opcodes.o binfmt_elf32.o
>>> -arm64-obj-$(CONFIG_ARM64_ILP32)		+= binfmt_ilp32.o
>>> +arm64-obj-$(CONFIG_ARM64_ILP32)		+= binfmt_ilp32.o sys_ilp32.o
>>>   arm64-obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o entry-ftrace.o
>>>   arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
>>>   arm64-obj-$(CONFIG_ARM64_MODULE_PLTS)	+= module-plts.o
>>> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>>> index cf4d1ae..1f7a145 100644
>>> --- a/arch/arm64/kernel/entry.S
>>> +++ b/arch/arm64/kernel/entry.S
>>> @@ -715,9 +715,13 @@ ENDPROC(ret_from_fork)
>>>    */
>>>   	.align	6
>>>   el0_svc:
>>> -	adrp	stbl, sys_call_table		// load syscall table pointer
>>>   	uxtw	scno, w8			// syscall number in w8
>>>   	mov	sc_nr, #__NR_syscalls
>>> +#ifdef CONFIG_ARM64_ILP32
>>> +	ldr	x16, [tsk, #TI_FLAGS]
>>> +	tbnz	x16, #TIF_32BIT_AARCH64, el0_ilp32_svc // We are using ILP32
>>> +#endif
>>> +	adrp	stbl, sys_call_table		// load syscall table pointer
>>>   el0_svc_naked:					// compat entry point
>>>   	stp	x0, scno, [sp, #S_ORIG_X0]	// save the original x0 and syscall number
>>>   	enable_dbg_and_irq
>>> @@ -737,6 +741,12 @@ ni_sys:
>>>   	b	ret_fast_syscall
>>>   ENDPROC(el0_svc)
>>>
>>> +#ifdef CONFIG_ARM64_ILP32
>>> +el0_ilp32_svc:
>>> +	adrp	stbl, sys_call_ilp32_table // load syscall table pointer
>>> +	b el0_svc_naked
>>> +#endif
>>> +
>>>   	/*
>>>   	 * This is the really slow path.  We're going to be doing context
>>>   	 * switches, and waiting for our parent to respond.
>>> diff --git a/arch/arm64/kernel/sys_ilp32.c b/arch/arm64/kernel/sys_ilp32.c
>>> new file mode 100644
>>> index 0000000..0996d8e
>>> --- /dev/null
>>> +++ b/arch/arm64/kernel/sys_ilp32.c
>>> @@ -0,0 +1,65 @@
>>> +/*
>>> + * AArch64- ILP32 specific system calls implementation
>>> + *
>>> + * Copyright (C) 2016 Cavium Inc.
>>> + * Author: Andrew Pinski <[email-masked]>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>>> + */
>>> +
>>> +#include <linux/compiler.h>
>>> +#include <linux/errno.h>
>>> +#include <linux/fs.h>
>>> +#include <linux/mm.h>
>>> +#include <linux/msg.h>
>>> +#include <linux/export.h>
>>> +#include <linux/sched.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/syscalls.h>
>>> +#include <linux/compat.h>
>>> +#include <asm-generic/syscalls.h>
>>> +
>>> +/* Using non-compat syscalls where necessary */
>>> +#define compat_sys_fadvise64_64        sys_fadvise64_64
>>> +#define compat_sys_fallocate           sys_fallocate
>>> +#define compat_sys_ftruncate64         sys_ftruncate
>>> +#define compat_sys_lookup_dcookie      sys_lookup_dcookie
>>> +#define compat_sys_pread64             sys_pread64
>>> +#define compat_sys_pwrite64            sys_pwrite64
>>> +#define compat_sys_readahead           sys_readahead
>>> +#define compat_sys_shmat               sys_shmat
>>> +#define compat_sys_sync_file_range     sys_sync_file_range
>>> +#define compat_sys_truncate64          sys_truncate
>>> +#define sys_llseek                     sys_lseek
>>> +#define sys_mmap2		       sys_mmap
>> I am a little bit confused here. We wrap the mmap to mmap2 in glibc
>> without shift the 4096 and We map mmap2 to mmap in kernel which
>> means we shift with the real page size. It works unless the
>> application want to mmap the offset bigger then 2G. In ILP32 app,
>> if the offset is bigger than 2G(e.g. 0xfb000000), it is a negative
>> number and extend to 64bit nagetive number in kernel
>> (0xfffffff fb000000). I add the "COMPAT_SYSCALL_WRAP6(mmap, ...)" in
>> kernel/compat_wrapper.c. But it is not works. I am not sure if it is
>> already sign extended in userspace.
>>
>> On the other hand, I read the code of mmap in arm and other
>> architecture. Usually, they will shift 4096 in userspace and shift
>> others in kernel if needed. Should we follow the similar ways or we
>> could call mmap_pgoff in glibc and do the shift according the real
>> page shift(getpages())?
>>
>> Thanks
>>
>> Bamvor
>>
>>
>
> Hi,
>
> AFAIR, here we don't shift offset, as it's 64-bit both in user-
> and kernel-space,
In your ilp32-2.22 branch, you wrapper mmap to mmap2 in which type of
offset is off_t. And off_t is 32bit in ilp32, correct?
"sysdeps/unix/sysv/linux/aarch64/ilp32/mmap64.c"
/* mmap is provided by mmap as they are the same. */
void *__mmap (void *__addr, size_t __len, int __prot,
                      int __flags, int __fd, __off_t __offset)
{
    void *result;
    result = (void *)
      INLINE_SYSCALL (mmap2, 6, __addr,
                      __len, __prot, __flags, __fd, __offset);
    return result;
}
> and just pass it from user to kernel thru glibc
> with no changes.
>
> It definitely works, as there are many mappings made by linker and
> libc in 2G+ area, and there are no problems with them. This is a
> typical ILP32 application map:
Ok, the different is I am talking about the offset in mmap. I am NOT
talking about the map result.
If I run my test case with strace:
"strace -e trace=mmap ./mmap.arm64_ilp32 0xfb000000 0x1000", here is
the part of log:

1 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7721000
2 mmap(NULL, 65536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7557000
3 page size<0x1000>, offset is <0xfb000000>
4 mmap(NULL, 4096, PROT_READ, MAP_SHARED, 3, 0xfffffffffb000000) = -1 EINVAL (Invalid argument)
5 mmap of mmapfile failed

As you said, line 1 and 2 show that mmap could map above 2G. But it
is NOT what I want to discussion.
As I said, when I pass the offset above 2G(e.g. 0xfb0000000), we
could find that the actual offset pass to kernel is
0xfffffffffb000000(reference line 4).
It will fail if I map in /dev/mmem. It will not fail if the fd is
a normal file. But in both of case the offset is wrong.

Regards

Bamvor

> 00400000-00401000 r-xp 00000000 08:00 130400     /root/mykill
> 00410000-00411000 rwxp 00000000 08:00 130400     /root/mykill
> 00527000-00549000 rwxp 00000000 00:00 0          [heap]
> c6278000-c6298000 rwxp 00000000 00:00 0
> c6298000-c63d0000 r-xp 00000000 08:00 135293     /root/sys-root/libilp32/libc-2.22.so
> c63d0000-c63e0000 ---p 00138000 08:00 135293     /root/sys-root/libilp32/libc-2.22.so
> c63e0000-c63e2000 r-xp 00138000 08:00 135293     /root/sys-root/libilp32/libc-2.22.so
> c63e2000-c63e3000 rwxp 0013a000 08:00 135293     /root/sys-root/libilp32/libc-2.22.so
> c63e3000-c63e6000 rwxp 00000000 00:00 0
> c63e6000-c63fc000 r-xp 00000000 08:00 135313     /root/sys-root/libilp32/libpthread-2.22.so
> c63fc000-c640b000 ---p 00016000 08:00 135313     /root/sys-root/libilp32/libpthread-2.22.so
> c640b000-c640c000 r-xp 00015000 08:00 135313     /root/sys-root/libilp32/libpthread-2.22.so
> c640c000-c640d000 rwxp 00016000 08:00 135313     /root/sys-root/libilp32/libpthread-2.22.so
> c640d000-c640f000 rwxp 00000000 00:00 0
> c640f000-c642c000 r-xp 00000000 08:00 135288     /root/sys-root/libilp32/ld-2.22.so
> c6437000-c6439000 rwxp 00000000 00:00 0
> c6439000-c643a000 r--p 00000000 00:00 0          [vvar]
> c643a000-c643b000 r-xp 00000000 00:00 0          [vdso]
> c643b000-c643c000 r-xp 0001c000 08:00 135288     /root/sys-root/libilp32/ld-2.22.so
> c643c000-c643d000 rwxp 0001d000 08:00 135288     /root/sys-root/libilp32/ld-2.22.so
> ffe2d000-ffe4e000 rw-p 00000000 00:00 0          [stack]
>
>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel