Subject: [PATCH 3/3] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms

From: [email-masked] (Neil Armstrong)
Date: Fri, 20 May 2016 10:53:03 +0200

On 05/20/2016 10:47 AM, Carlo Caione wrote:
> On 20/05/16 10:27, Neil Armstrong wrote:
>> Update DTSI file to add the reset controller node.
>>
>> Signed-off-by: Neil Armstrong <[email-masked]>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> index 832815d..2463e04 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> @@ -129,6 +129,12 @@
>>  			#size-cells = <2>;
>>  			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
>>  
>> +			reset: reset-controller at 4404 {
>> +				compatible = "amlogic,meson-gxbb-reset";
>> +				reg = <0x0 0x04404 0x0 0x20>;
>> +				#reset-cells = <1>;
>> +			};
>> +
>>  			uart_A: serial at 84c0 {
>>  				compatible = "amlogic,meson-uart";
>>  				reg = <0x0 0x084c0 0x0 0x14>;
> 
> Missing #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> ?
> 
> Thanks,
> 

Shouldn't we wait until the reset bindings are actually used in the dtsi ?
I'm quite sure kevin will post it with the Ethernet nodes.

Neil