Subject: [PATCH 1/3] reset: Add support for the Amlogic Meson GXBB Reset Controller

From: [email-masked] (Neil Armstrong)
Date: Fri, 20 May 2016 14:20:25 +0200

On 05/20/2016 12:04 PM, Carlo Caione wrote:
> On 20/05/16 11:10, Neil Armstrong wrote:
>> On 05/20/2016 11:04 AM, Carlo Caione wrote:
>>> On 20/05/16 10:27, Neil Armstrong wrote:
>>>> This patch adds the platform driver for the Amlogic Meson GXBB Reset
>>>> Controller.
>>>>
>>>> Signed-off-by: Neil Armstrong <[email-masked]>
>>>> ---
>>>>  drivers/reset/Kconfig            |   6 ++
>>>>  drivers/reset/Makefile           |   1 +
>>>>  drivers/reset/reset-meson-gxbb.c | 129 +++++++++++++++++++++++++++++++++++++++
>>>>  3 files changed, 136 insertions(+)
>>>>  create mode 100644 drivers/reset/reset-meson-gxbb.c
>>>
>>> Do we really need to be that specific (-gxbb)? This driver looks generic
>>> and simple enough to be used for several Amlogic families. You are
>>> already differentiating between them with the include file defining the
>>> reset indexes for the SoC.
>>
>> This is a good question, do the S805 have similar registers ? Same count and width ?
>> I no, it should need a rework to add a data structure per-SoC.
> 
> According to the datasheet on S805 we have 7 registers with 16 reset
> bits per register.

It will fit, I made the change to be generic. Do you know if the meson8 and previous meson6 has these registers ?

Neil