Subject: [PATCH] tty/serial: atmel: fix RS485 half duplex with DMA

From: [email-masked] (Nicolas Ferre)
Date: Thu, 2 Jun 2016 12:41:36 +0200

Le 28/05/2016 00:54, Alexandre Belloni a ?crit :
> When using DMA, half duplex doesn't work properly because rx is not stopped
> before starting tx. Ensure we call atmel_stop_rx() in the DMA case.
> 
> Signed-off-by: Alexandre Belloni <[email-masked]>

Acked-by: Nicolas Ferre <[email-masked]>

We can also add:
Cc: <[email-masked]> # v4.3+

Thanks Alexandre!

> ---
>  drivers/tty/serial/atmel_serial.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 954941dd8124..f9c798cba83f 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -482,19 +482,21 @@ static void atmel_start_tx(struct uart_port *port)
>  {
>  	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
>  
> -	if (atmel_use_pdc_tx(port)) {
> -		if (atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN)
> -			/* The transmitter is already running.  Yes, we
> -			   really need this.*/
> -			return;
> +	if (atmel_use_pdc_tx(port) && (atmel_uart_readl(port, ATMEL_PDC_PTSR)
> +				       & ATMEL_PDC_TXTEN))
> +		/* The transmitter is already running.  Yes, we
> +		   really need this.*/
> +		return;
>  
> +	if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
>  		if ((port->rs485.flags & SER_RS485_ENABLED) &&
>  		    !(port->rs485.flags & SER_RS485_RX_DURING_TX))
>  			atmel_stop_rx(port);
>  
> +	if (atmel_use_pdc_tx(port))
>  		/* re-enable PDC transmit */
>  		atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
> -	}
> +
>  	/* Enable interrupts */
>  	atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask);
>  }
> 

-- 
Nicolas Ferre