Subject: [PATCH 10/14] regulator: pwm: Switch to the atomic PWM API

From: [email-masked] (Laxman Dewangan)
Date: Mon, 6 Jun 2016 11:44:59 +0530

On Saturday 04 June 2016 11:58 AM, Boris Brezillon wrote:
> On Fri, 3 Jun 2016 13:50:28 -0700
> Brian Norris <[email-masked]> wrote:
>
>> + Laxman
>>
>> Hi,
>>
>> On Fri, Jun 03, 2016 at 10:23:08AM +0200, Boris Brezillon wrote:
>>> -	 * calculation loss.
>>> -	 */
>>> -	req_period = req_diff * pargs.period;
>>> -	div_u64_rem(req_period, diff, &rem);
>>> -	if (!rem) {
>>> -		do_div(req_period, diff);
>>> -		duty_pulse = (unsigned int)req_period;
>>> -	} else {
>>> -		duty_pulse = (pargs.period / 100) * ((req_diff * 100) / diff);
>>> -	}
>>> +	/* We pass diff as the scale to get a uV precision. */
>>> +	pwm_set_relative_duty_cycle(&pstate, req_diff, diff);
>> Notably, you're dropping much of Laxman's commit fd786fb0276a ("regulator:
>> pwm: Try to avoid voltage error in duty cycle calculation"), but I
>> believe the DIV_ROUND_CLOSEST_ULL() in pwm_set_relative_duty_cycle()
>> solves his problem better.
> Oops, forgot to comment on that in the commit message. Indeed, the use
> of pwm_set_relative_duty_cycle() solves the problem Laxman was seeing.
>
Yaah, the issue which I was seeing and had fix will be resolved with 
this also.
I wanted to do req_diff * period first before any scaling/division.

Function pwm_set_relative_duty_cycle() does the same,  and hence it is fine.

state->duty_cycle = DIV_ROUND_CLOSEST_ULL((u64)val * state->period,
+                          scale);

Acked-by: Laxman Dewangan <[email-masked]>

Thanks,
Laxman