Subject: [PATCH] arm64: dts: berlin4ct: Add L2 cache topology

From: [email-masked] (Sebastian Hesselbarth)
Date: Wed, 6 Jul 2016 19:49:01 +0200

On 16.06.2016 10:40, Jisheng Zhang wrote:
> This patch adds the L2 cache topology for berlin4ct which has 1MB L2
> cache.
> 
> Signed-off-by: Jisheng Zhang <[email-masked]>
> ---
>  arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index 099ad93..c9e3a98 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
[...]
> @@ -92,9 +95,14 @@
>  			device_type = "cpu";
>  			reg = <0x3>;
>  			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
>  			cpu-idle-states = <&CPU_SLEEP_0>;
>  		};
>  
> +		L2_0: l2-cache0 {

Jisheng,

The node name should just have a generic name that reflects
the purpose of the unit it represents, i.e.
s/l2-cache0/cache/

nits:
- What is that "0" for? Please remove if there is no good reason.
- Does the node label need to be upper-case? Please make it lower case.

Sebastian

> +			compatible = "cache";
> +		};
> +
>  		idle-states {
>  			entry-method = "psci";
>  			CPU_SLEEP_0: cpu-sleep-0 {
>