From: s.nawrocki@samsung•com (Sylwester Nawrocki)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 6/7] spi: s3c64xx: restore removed comments
Date: Mon, 11 Jul 2016 12:33:42 +0200 [thread overview]
Message-ID: <57837606.8050906@samsung.com> (raw)
In-Reply-To: <146799464881.73491.7507792367941552864@resonance>
On 07/08/2016 06:17 PM, Michael Turquette wrote:
> Quoting Andi Shyti (2016-07-08 07:46:40)
>> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
>> index 6da663f..32b66f0 100644
>> --- a/drivers/spi/spi-s3c64xx.c
>> +++ b/drivers/spi/spi-s3c64xx.c
>> @@ -639,6 +639,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
>> writel(val, regs + S3C64XX_SPI_MODE_CFG);
>>
>> if (sdd->port_conf->clk_from_cmu) {
>> + /* There is half-multiplier before the SPI */
>> clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
>
> Just a small comment, but if the fixed-factor divide-by-two clock was
> modeled in Linux, then this driver could call clk_set_rate on that clock
> with the "correct" rate.
>
> I guess that this driver would be the provider of that clock?
Good point, however I'm not sure if it is worth to model this divider
with a clk object. It is an internal divider and the clock it provides
is only used internally within the SPI controller. Thus the spi-s3c64xx
driver would be provider on the only consumer of this clock.
Additionally, the "There is half-multiplier before the SPI" comment
seems to be obfuscating how the hardware really looks like to me.
It talks about multiplier (which reminds me of PLLs with a divider
in the feedback loop) while there is a simple divider which should
be considered as an integral part of the controller IP block.
While we are at it, I'd propose to change this comment to something
like:
/* The SCLK_SPI clock is divided internally by 2 */
next prev parent reply other threads:[~2016-07-11 10:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-08 14:46 [PATCH v2 0/7] spi s3c64xx ioclk handling Andi Shyti
2016-07-08 14:46 ` [PATCH v2 1/7] bindings: spi-samsung: add exynos5433 spi compatible Andi Shyti
2016-07-08 20:23 ` Krzysztof Kozlowski
2016-07-11 10:49 ` Sylwester Nawrocki
2016-07-14 16:33 ` Applied "spi: s3c64xx: add exynos5433 spi compatible" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 2/7] bindings: spi-samsung: document the clocks and the clock-name property Andi Shyti
2016-07-08 20:32 ` Krzysztof Kozlowski
2016-07-11 2:36 ` [PATCH v3] " Andi Shyti
2016-07-14 16:32 ` Applied "spi: s3c64xx: document the clocks and the clock-name property" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 3/7] spi: s3c64xx: rename goto labels to meaningful names Andi Shyti
2016-07-14 16:32 ` Applied "spi: s3c64xx: rename goto labels to meaningful names" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 4/7] spi: s3c64xx: use error code from clk_prepare_enable() Andi Shyti
2016-07-08 20:33 ` Krzysztof Kozlowski
2016-07-14 16:32 ` Applied "spi: s3c64xx: use error code from clk_prepare_enable()" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 5/7] spi: s3c64xx: add exynos5433 compatible for ioclk handling Andi Shyti
2016-07-08 16:13 ` Michael Turquette
2016-07-08 16:31 ` Andi Shyti
2016-07-08 20:39 ` Krzysztof Kozlowski
2016-07-14 16:32 ` Applied "spi: s3c64xx: add Exynos5433 compatible for ioclk handling" to the spi tree Mark Brown
2016-07-08 14:46 ` [PATCH v2 6/7] spi: s3c64xx: restore removed comments Andi Shyti
2016-07-08 16:17 ` Michael Turquette
2016-07-08 16:35 ` Andi Shyti
2016-07-11 10:33 ` Sylwester Nawrocki [this message]
2016-07-11 22:17 ` Michael Turquette
2016-07-12 12:16 ` Sylwester Nawrocki
2016-07-12 6:54 ` [PATCH v3 " Andi Shyti
2016-07-12 8:22 ` Mark Brown
2016-07-12 8:25 ` Andi Shyti
2016-07-12 9:00 ` Mark Brown
2016-07-12 18:07 ` Michael Turquette
2016-07-14 16:32 ` Applied "spi: s3c64xx: restore removed comments" to the spi tree Mark Brown
2016-07-08 20:35 ` [PATCH v2 6/7] spi: s3c64xx: restore removed comments Krzysztof Kozlowski
2016-07-08 14:46 ` [PATCH v2 7/7] clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks Andi Shyti
2016-07-11 10:58 ` Sylwester Nawrocki
2016-07-08 16:21 ` [PATCH v2 0/7] spi s3c64xx ioclk handling Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57837606.8050906@samsung.com \
--to=s.nawrocki@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox