Subject: mmc: dwmmc: exynos: Warn if HS400 is being used on non-Exynos5420 chipset

From: [email-masked] (Jaehoon Chung)
Date: Tue, 26 Jul 2016 09:49:01 +0900

On 07/15/2016 01:15 PM, Alim Akhtar wrote:
> Hi Krzysztof,
> 
> On 07/14/2016 06:52 PM, Krzysztof Kozlowski wrote:
>> Chipsets before Exynos5420 did not support HS400 so if MMC core tries to
>> configure HS400 timing, this might or might not work.  Warn in such
>> cases because this is DTB misconfiguration.
>>
>> Signed-off-by: Krzysztof Kozlowski <[email-masked]>
>> ---
> 
> Reviewed-by: Alim Akhtar <[email-masked]>

Applied on my repository. Thanks!
Before applied, I modified the prefix of subject from "dwmmc" to "dw_mmc"

Best Regards,
Jaehoon Chung

> 
>>   drivers/mmc/host/dw_mmc-exynos.c | 6 +++++-
>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
>> index da0ef1765735..7ab3d749b5ae 100644
>> --- a/drivers/mmc/host/dw_mmc-exynos.c
>> +++ b/drivers/mmc/host/dw_mmc-exynos.c
>> @@ -225,8 +225,12 @@ static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
>>        * Not supported to configure register
>>        * related to HS400
>>        */
>> -    if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420)
>> +    if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) {
>> +        if (timing == MMC_TIMING_MMC_HS400)
>> +            dev_warn(host->dev,
>> +                 "cannot configure HS400, unsupported chipset\n");
>>           return;
>> +    }
>>
> It is good to have extra bit of debug information handy.
> 
>>       dqs = priv->saved_dqs_en;
>>       strobe = priv->saved_strobe_ctrl;
>>
> 
>