From: cw00.choi@samsung•com (Chanwoo Choi)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 5/7] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
Date: Tue, 16 Aug 2016 22:02:27 +0900 [thread overview]
Message-ID: <57B30EE3.1070606@samsung.com> (raw)
In-Reply-To: <d4ebd29f-98b7-6e56-42ee-923d55ca85ff@samsung.com>
Hi Sylwester,
On 2016? 08? 16? 19:50, Sylwester Nawrocki wrote:
> Hi Chanwoo,
>
> On 08/16/2016 08:35 AM, Chanwoo Choi wrote:
>> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
>> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
>> PSCI (Power State Coordination Interface) v0.1.
>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1580 ++++++++++++++++++++
>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> new file mode 100644
>> index 000000000000..2a5b05744533
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> @@ -0,0 +1,1580 @@
>
>> +
>> +/ {
>> + compatible = "samsung,exynos5433";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>
>> + soc: soc {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x0 0x0 0x18000000>;
>
>> + lpass: lpass at 11400000 {
>> + compatible = "samsung,exynos5433-lpass";
>> + reg = <0x11400000 0x100>;
>> + samsung,pmu-syscon = <&pmu_system_controller>;
>> + status = "disabled";
>> + };
>> +
>> + i2s0: i2s0 at 11440000 {
>> + compatible = "samsung,exynos7-i2s";
>> + reg = <0x11440000 0x100>;
>> + dmas = <&adma 0 &adma 2>;
>> + dma-names = "tx", "rx";
>> + interrupts = <0 70 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
>> + <&cmu_aud CLK_SCLK_AUD_I2S>,
>> + <&cmu_aud CLK_SCLK_I2S_BCLK>;
>> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2s0_bus>;
>> + status = "disabled";
>> + };
>
>> + serial_3: serial at 11460000 {
>> + compatible = "samsung,exynos5433-uart";
>> + reg = <0x11460000 0x100>;
>> + interrupts = <0 67 0>;
>> + clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
>> + <&cmu_aud CLK_SCLK_AUD_UART>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart_aud_bus>;
>> + status = "disabled";
>> + };
>> +
>
>> + amba {
>> + compatible = "arm,amba-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>
>> + adma: adma at 11420000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x11420000 0x1000>;
>> + interrupts = <0 73 0>;
>> + clocks = <&cmu_aud CLK_ACLK_DMAC>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + };
>> + };
>> + };
>
> The latest Exynos5433 Audio Subsystem bindings look like this
> https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.9/mfd/exynos-lpass-v5&id=104cc6ad3ecc7c4c8ecf73663b93eb48b78f35aa
> i.e. adma at 11420000, i2s0 at 11440000, serial at 11460000 should be subnodes of
> the lpass at 11400000 node.
OK. I'll use your latest patches for sound and then test it again.
Regards,
Chanwoo Choi
next prev parent reply other threads:[~2016-08-16 13:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-16 6:27 [PATCH 0/7] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board Chanwoo Choi
2016-08-16 6:27 ` [PATCH 1/7] clocksource: exynos_mct: Add the support for Exynos 64bit SoC Chanwoo Choi
2016-08-16 6:27 ` [PATCH 2/7] Documentation: bindings: Add Exynos5433 PMU compatible Chanwoo Choi
2016-08-16 7:40 ` Krzysztof Kozlowski
2016-08-16 8:08 ` Chanwoo Choi
2016-08-16 8:15 ` Krzysztof Kozlowski
2016-08-18 18:59 ` Rob Herring
2016-08-16 6:27 ` [PATCH 3/7] cpufreq: dt: Add exynos5433 compatible to use generic cpufreq driver Chanwoo Choi
2016-08-16 7:47 ` Krzysztof Kozlowski
2016-08-16 8:49 ` Viresh Kumar
2016-08-16 6:27 ` [PATCH 4/7] pinctrl: samsung: Add GPFx support of Exynos5433 Chanwoo Choi
2016-08-16 6:42 ` Tomasz Figa
2016-08-16 8:46 ` Krzysztof Kozlowski
2016-08-18 19:00 ` Rob Herring
2016-08-19 9:07 ` Chanwoo Choi
2016-08-19 11:31 ` Tomasz Figa
2016-08-24 12:53 ` Chanwoo Choi
2016-08-16 6:35 ` [PATCH 5/7] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC Chanwoo Choi
2016-08-16 10:29 ` Krzysztof Kozlowski
2016-08-16 12:59 ` Chanwoo Choi
2016-08-16 17:51 ` Krzysztof Kozlowski
2016-08-17 0:46 ` Chanwoo Choi
2016-08-16 10:50 ` Sylwester Nawrocki
2016-08-16 13:02 ` Chanwoo Choi [this message]
2016-08-19 10:48 ` Marek Szyprowski
2016-08-23 2:58 ` Chanwoo Choi
2016-08-16 6:35 ` [PATCH 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board Chanwoo Choi
2016-08-17 6:42 ` Krzysztof Kozlowski
2016-08-17 7:36 ` Chanwoo Choi
2016-08-18 19:08 ` Rob Herring
2016-08-19 1:01 ` Chanwoo Choi
2016-08-19 17:05 ` Sylwester Nawrocki
2016-08-21 7:46 ` Chanwoo Choi
2016-08-16 6:35 ` [PATCH 7/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board Chanwoo Choi
2016-08-17 6:43 ` Krzysztof Kozlowski
2016-08-17 7:37 ` Chanwoo Choi
2016-08-18 19:10 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57B30EE3.1070606@samsung.com \
--to=cw00.choi@samsung$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox