Subject: [RFC PATCH v3 6/7] arm64: irqflags: Use ICC sysregs to implement IRQ masking

From: [email-masked] (Marc Zyngier)
Date: Mon, 22 Aug 2016 11:12:06 +0100

Hi Daniel,

On 19/08/16 17:13, Daniel Thompson wrote:
> Currently irqflags is implemented using the PSR's I bit. It is possible
> to implement irqflags by using the co-processor interface to the GIC.
> Using the co-processor interface makes it feasible to simulate NMIs
> using GIC interrupt prioritization.
> 
> This patch changes the irqflags macros to modify, save and restore
> ICC_PMR_EL1. This has a substantial knock on effect for the rest of
> the kernel. There are four reasons for this:
> 
> 1. The state of the ICC_PMR_EL1_G_BIT becomes part of the CPU context

What is this G bit? I can't spot anything like this in the GICv3 spec.

>    and must be saved and restored during traps. To simplify the
>    additional context management the ICC_PMR_EL1_G_BIT is converted
>    into a fake (reserved) bit within the PSR (PSR_G_BIT). Naturally
>    this approach will need to be changed if future ARM architecture
>    extensions make use of this bit.
> 
> 2. The hardware automatically masks the I bit (at boot, during traps, etc).
>    When the I bit is set by hardware we must add code to switch from I
>    bit masking and PMR masking.
> 
> 3. Some instructions, noteably wfi, require that the PMR not be used
>    for interrupt masking. Before calling these instructions we must
>    switch from PMR masking to I bit masking.
> 
> 4. We use the alternatives system to all a single kernel to boot and
>    switch between the different masking approaches.
> 
> Signed-off-by: Daniel Thompson <[email-masked]>
> ---
>  arch/arm64/Kconfig                  |  15 +++++
>  arch/arm64/include/asm/arch_gicv3.h |  51 +++++++++++++++++
>  arch/arm64/include/asm/assembler.h  |  32 ++++++++++-
>  arch/arm64/include/asm/irqflags.h   | 106 ++++++++++++++++++++++++++++++++++++
>  arch/arm64/include/asm/ptrace.h     |  23 ++++++++
>  arch/arm64/kernel/entry.S           |  77 ++++++++++++++++++++++----
>  arch/arm64/kernel/head.S            |  35 ++++++++++++
>  arch/arm64/kernel/smp.c             |   6 ++
>  arch/arm64/mm/proc.S                |  23 ++++++++
>  drivers/irqchip/irq-gic-v3.c        |   2 +
>  include/linux/irqchip/arm-gic.h     |   2 +-
>  11 files changed, 356 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index bc3f00f586f1..56846724d2af 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -718,6 +718,21 @@ config FORCE_MAX_ZONEORDER
>  	  However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
>  	  4M allocations matching the default size used by generic code.
>  
> +config USE_ICC_SYSREGS_FOR_IRQFLAGS
> +	bool "Use ICC system registers for IRQ masking"
> +	select CONFIG_ARM_GIC_V3
> +	help
> +	  Using the ICC system registers for IRQ masking makes it possible
> +	  to simulate NMI on ARM64 systems. This allows several interesting
> +	  features (especially debug features) to be used on these systems.
> +
> +	  Say Y here to implement IRQ masking using ICC system
> +	  registers. This will result in an unbootable kernel if these

Is that a true statement? If so, this is not acceptable. We want a
kernel that has this feature enabled to boot on anything, whether it has
GICv3 or not. It should disable itself on a GICv2 system.

> +	  registers are not implemented or made inaccessible by the
> +	  EL3 firmare or EL2 hypervisor (if present).
> +
> +	  If unsure, say N
> +
>  menuconfig ARMV8_DEPRECATED
>  	bool "Emulate deprecated/obsolete ARMv8 instructions"
>  	depends on COMPAT
> diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
> index fc2a0cb47b2c..a4ad69e2831b 100644
> --- a/arch/arm64/include/asm/arch_gicv3.h
> +++ b/arch/arm64/include/asm/arch_gicv3.h
> @@ -80,6 +80,9 @@
>  #include <linux/stringify.h>
>  #include <asm/barrier.h>
>  
> +/* Our default, arbitrary priority value. Linux only uses one anyway. */
> +#define DEFAULT_PMR_VALUE	0xf0
> +
>  /*
>   * Low-level accessors
>   *
> @@ -102,9 +105,35 @@ static inline void gic_write_dir(u32 irq)
>  static inline u64 gic_read_iar_common(void)
>  {
>  	u64 irqstat;
> +	u64 __maybe_unused daif;
> +	u64 __maybe_unused pmr;
> +	u64 __maybe_unused default_pmr_value = DEFAULT_PMR_VALUE;
>  
> +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
>  	asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
>  	dsb(sy);
> +#else
> +	/*
> +	 * The PMR may be configured to mask interrupts when this code is
> +	 * called, thus in order to acknowledge interrupts we must set the
> +	 * PMR to its default value before reading from the IAR.
> +	 *
> +	 * To do this without taking an interrupt we also ensure the I bit
> +	 * is set whilst we are interfering with the value of the PMR.
> +	 */
> +	asm volatile(
> +		"mrs	%1, daif\n\t"			     /* save I bit  */
> +		"msr	daifset, #2\n\t"		     /* set I bit   */
> +		"mrs_s  %2, " __stringify(ICC_PMR_EL1) "\n\t"/* save PMR    */
> +		"msr_s	" __stringify(ICC_PMR_EL1) ",%3\n\t" /* set PMR     */
> +		"mrs_s	%0, " __stringify(ICC_IAR1_EL1) "\n\t" /* ack int   */
> +		"msr_s  " __stringify(ICC_PMR_EL1) ",%2\n\t" /* restore PMR */
> +		"isb\n\t"
> +		"msr	daif, %1"			     /* restore I   */
> +		: "=r" (irqstat), "=&r" (daif), "=&r" (pmr)
> +		: "r" (default_pmr_value));

I'm a bit puzzled by this. Why would you have to mess with PMR or DAIF
at this stage? Why can't we just let the GIC priority mechanism do its
thing? I'd expect the initial setting of PMR (indicating whether or not
we have normal interrupts enabled or not) to be enough to perform the
filtering.

You may get an NMI while you're already handling an interrupt, but
that's fair game, and that's not something we should prevent.

What am I missing?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...