Subject: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support

From: [email-masked] (Kishon Vijay Abraham I)
Date: Tue, 7 Mar 2017 10:48:42 +0530

Hi Joao,

On Friday 17 February 2017 10:50 PM, Joao Pinto wrote:
> ?s 9:50 AM de 2/17/2017, Kishon Vijay Abraham I escreveu:
>> Add endpoint mode support to designware driver. This uses the
>> EP Core layer introduced recently to add endpoint mode support.
>> *Any* function driver can now use this designware device
>> in order to achieve the EP functionality.
>>
>> Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
>> ---
>>  drivers/pci/dwc/Kconfig              |    5 +
>>  drivers/pci/dwc/Makefile             |    1 +
>>  drivers/pci/dwc/pcie-designware-ep.c |  342 ++++++++++++++++++++++++++++++++++
>>  drivers/pci/dwc/pcie-designware.c    |   51 +++++
>>  drivers/pci/dwc/pcie-designware.h    |   72 +++++++
>>  5 files changed, 471 insertions(+)
>>  create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
>>

<snip>

>> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
>> index 686945d..49b28c8 100644
>> --- a/drivers/pci/dwc/pcie-designware.c
>> +++ b/drivers/pci/dwc/pcie-designware.c
>> @@ -173,6 +173,57 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
>>  	dev_err(pci->dev, "iATU is not being enabled\n");
>>  }
>>  
>> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
>> +			     u64 cpu_addr, enum dw_pcie_as_type as_type)
>> +{
>> +	int type;
>> +	void __iomem *base = pci->dbi_base;
>> +
>> +	dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
>> +			  PCIE_ATU_REGION_INBOUND | index);
>> +	dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
>> +			  lower_32_bits(cpu_addr));
>> +	dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
>> +			  upper_32_bits(cpu_addr));
>> +
>> +	switch (as_type) {
>> +	case DW_PCIE_AS_MEM:
>> +		type = PCIE_ATU_TYPE_MEM;
>> +		break;
>> +	case DW_PCIE_AS_IO:
>> +		type = PCIE_ATU_TYPE_IO;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
>> +	dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, PCIE_ATU_ENABLE |
>> +			  PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
>> +	return 0;
>> +}
>> +
> 
> This Atu programming is for PCI Cores <= 4.70. Please follow the same approach as:
> https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/tree/drivers/pci/dwc/pcie-designware.c?h=pci/host-designware#n95

Can you provide PCIE_GET_ATU_INB_UNR_REG_OFFSET (similar to
PCIE_GET_ATU_OUTB_UNR_REG_OFFSET)?

Thanks
Kishon