From: xuwei5@hisilicon•com (Wei Xu)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v6 7/8] arm64: dts: hikey960: add device node for pmic and regulators
Date: Thu, 15 Jun 2017 20:55:31 +0100 [thread overview]
Message-ID: <5942E633.9040908@hisilicon.com> (raw)
In-Reply-To: <20170608220841.26531-8-guodong.xu@linaro.org>
Hi Guodong,
On 2017/6/8 23:08, Guodong Xu wrote:
> From: Wang Xiaoyin <hw.wangxiaoyin@hisilicon•com>
>
> add device node for hi6421 pmic core and hi6421v530
> voltage regulator,include LDO(1,3,9,11,15,16)
>
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon•com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro•org>
> Acked-by: Arnd Bergmann <arnd@arndb•de>
> ---
> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index ca448f0..e579333 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -97,6 +97,52 @@
> default-state = "off";
> };
> };
> +
> + pmic: pmic at fff34000 {
> + compatible = "hisilicon,hi6421v530-pmic";
> + reg = <0x0 0xfff34000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + ldo3: LDO3 { /* HDMI */
> + regulator-name = "VOUT3_1V85";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo9: LDO9 { /* SDCARD I/O */
> + regulator-name = "VOUT9_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo11: LDO11 { /* Low Speed Connector */
> + regulator-name = "VOUT11_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo15: LDO15 { /* UFS VCC */
> + regulator-name = "VOUT15_3V0";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo16: LDO16 { /* SD VDD */
> + regulator-name = "VOUT16_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + };
> + };
> + };
> };
>
> &i2c0 {
>
Since you put the dts part into another patch set[1] and the driver part has been applied.
I will pick up [1].
Thanks!
[1]: https://lkml.org/lkml/2017/6/14/1052
BR,
Wei
next prev parent reply other threads:[~2017-06-15 19:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 22:08 [PATCH v6 0/8] MFD: add driver for HiSilicon Hi6421v530 PMIC Guodong Xu
2017-06-08 22:08 ` [PATCH v6 1/8] mfd: hi6421-pmic: cleanup: change license text to shorter form Guodong Xu
2017-06-08 22:08 ` [PATCH v6 2/8] mfd: hi6421-pmic: cleanup: update dev_err messages Guodong Xu
2017-06-08 22:08 ` [PATCH v6 3/8] dt-bindings: mfd: hi6421: Add hi6421v530 compatible string Guodong Xu
2017-06-08 22:08 ` [PATCH v6 4/8] mfd: hi6421-pmic: add support for HiSilicon Hi6421v530 Guodong Xu
2017-06-26 13:33 ` Guodong Xu
2017-07-03 12:00 ` Lee Jones
2017-07-03 12:01 ` Lee Jones
2017-06-08 22:08 ` [PATCH v6 5/8] regulator: hi6421v530: add driver for hi6421v530 voltage regulator Guodong Xu
2017-06-13 20:35 ` Mark Brown
2017-06-14 8:13 ` Guodong Xu
2017-06-08 22:08 ` [PATCH v6 6/8] regulator: hi6421: Describe consumed platform device Guodong Xu
2017-06-08 22:08 ` [PATCH v6 7/8] arm64: dts: hikey960: add device node for pmic and regulators Guodong Xu
2017-06-15 15:01 ` Wei Xu
2017-06-15 19:55 ` Wei Xu [this message]
2017-06-16 3:47 ` Guodong Xu
2017-06-08 22:08 ` [PATCH v6 8/8] arm64: defconfig: enable support hi6421v530 PMIC Guodong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5942E633.9040908@hisilicon.com \
--to=xuwei5@hisilicon$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox