From: mark.yao@rock-chips•com (Mark yao)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v6 4/7] drm/rockchip: vop: group vop registers
Date: Fri, 28 Jul 2017 10:45:33 +0800 [thread overview]
Message-ID: <597AA54D.60706@rock-chips.com> (raw)
In-Reply-To: <597A8D38.3040905@rock-chips.com>
Hi Heiko
On 2017?07?28? 09:02, Mark yao wrote:
> Hi Heiko
>
> Thanks for the test.
>
> On 2017?07?27? 18:10, Heiko St?bner wrote:
>> Am Donnerstag, 27. Juli 2017, 11:51:06 CEST schrieb Heiko St?bner:
>>> Hi Mark,
>>>
>>> Am Mittwoch, 26. Juli 2017, 14:19:25 CEST schrieb Mark Yao:
>>>> Grouping the vop registers facilitates make register
>>>> definition clearer, and also is useful for different vop
>>>> reuse the same group register.
>>>>
>>>> Signed-off-by: Mark Yao <mark.yao@rock-chips•com>
>>>> ---
>>>>
>>>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 99
>>>> ++++++++++++------------
>>>> drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 60 ++++++++-------
>>>> drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 112
>>>>
>>>> +++++++++++++++------------- 3 files changed, 144 insertions(+), 127
>>>> deletions(-)
>>> This breaks display support on both rk3036 and rk3288 and I end up
>>> with a null pointer dereference in
>>>
>>> [ 10.640297] Unable to handle kernel NULL pointer dereference at virtual
>>> address 00000000 [ 10.654430] pgd = c0204000
>>> [ 10.657452] [00000000] *pgd=00000000
>>> [ 10.661473] Internal error: Oops: 5 [#1] SMP ARM
>>> [ 10.666635] Modules linked in: snd_pcm media snd_timer phy_rockchip_dp
>>> snd soundcore rockchipdrm dw_hdmi analogix_dp rtc_rk808 pwm_rockchip
>>> clk_rk808 spi_rockchip [ 10.682897] CPU: 2 PID: 143 Comm: kworker/2:2 Not
>>> tainted 4.13.0-rc2-01791-g2b86603d0515 #355 [ 10.692430] Hardware name:
>>> Rockchip (Device Tree)
>>> [ 10.697692] Workqueue: events deferred_probe_work_func
>>> [ 10.702152] Linux video capture interface: v2.00
>>> [ 10.708590] task: ee38c800 task.stack: ed2e6000
>>> [ 10.713656] PC is at vop_reg_set.constprop.4+0x4/0xa8 [rockchipdrm]
>>> [ 10.720668] LR is at vop_bind+0x568/0x8a0 [rockchipdrm]
>> The obvious reason for that is
>>
>>> @@ -164,14 +153,20 @@ static inline uint32_t vop_read_reg(struct vop *vop,
>>> uint32_t base, return (vop_readl(vop, base + reg->offset) >> reg->shift) &
>>> reg->mask; }
>>>
>>> -static inline void vop_mask_write(struct vop *vop, uint32_t offset,
>>> - uint32_t mask, uint32_t shift, uint32_t v,
>>> - bool write_mask, bool relaxed)
>>> +static void vop_reg_set(struct vop *vop, const struct vop_reg *reg,
>>> + uint32_t _offset, uint32_t _mask, uint32_t v,
>>> + const char *reg_name)
>>> {
>>> - if (!mask)
>>> + int offset = reg->offset + _offset;
>>> + int mask = reg->mask & _mask;
>>> + int shift = reg->shift;
>
> Does the crash is that using reg->offset/mask/shift before !reg checking?
I reproduce this cause, from objdump, it crash on "int mask = reg->mask & _mask; "
Seems difference gcc has difference behavior, my aarch64 gcc maybe optimize it,
only access when the value be used. I think that is the reason why rk3399 works on my test.
I will fix it at next version.
>
>>> +
>>> + if (!reg || !reg->mask) {
>>> + dev_dbg(vop->dev, "Warning: not support %s\n", reg_name);
>>> return;
>>> + }
>> where the check for !reg happens after it got already dereferenced.
>> But even with that fixed I end up with
>>
>> on rk3288:
>> [ 7.254823] rockchip-vop ff930000.vop: Warning: not support global_regdone_en
>> [ 7.262847] rockchip-vop ff930000.vop: Warning: not support gate
>> [ 7.269580] rockchip-vop ff930000.vop: Warning: not support gate
>> [ 7.302765] rockchip-vop ff940000.vop: Warning: not support global_regdone_en
>> [ 7.310758] rockchip-vop ff940000.vop: Warning: not support gate
>> [ 7.317475] rockchip-vop ff940000.vop: Warning: not support gate
>> [ 7.425724] rockchip-vop ff930000.vop: Warning: not support edp_pin_pol
>> [ 7.526298] rockchip-vop ff940000.vop: Warning: not support hdmi_pin_pol
>
> Rk3288 does not support independent pin_pol settings, all output interfaces share the pin_pol register,
> So not support hdmi_pin_pol here is correct.
>
> hdmi pin pol would be set by following register:
> .pin_pol = VOP_REG(RK3288_DSP_CTRL0, 0xf, 4),
>
>>
>> on rk3036:
>> [ 12.389138] rockchip-vop 10118000.vop: Warning: not support global_regdone_en
>> [ 12.397324] rockchip-vop 10118000.vop: Warning: not support gate
>> [ 12.404165] rockchip-vop 10118000.vop: Warning: not support gate
>> [ 13.747361] rockchip-vop 10118000.vop: Warning: not support hdmi_pin_pol
>> [ 13.747371] rockchip-vop 10118000.vop: Warning: not support hdmi_en
>> [ 13.747379] rockchip-vop 10118000.vop: Warning: not support hpost_st_end
>> [ 13.747385] rockchip-vop 10118000.vop: Warning: not support vpost_st_end
>> [ 13.747461] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
>> [ 13.767098] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
>> [ 13.786060] rockchip-vop 10118000.vop: Warning: not support src_alpha_ctl
>>
>> While reqdone and friends are obviously features of newer vops, at least
>> the hdmi pin-pol is available on both these socs.
>>
>> With this patch applied (and null-ptr fixed) I end up without hdmi output
>> on both socs.
>
> Hmmm, I am confused, from code review, I didn't see what will cause hdmi not work on rk3036 and rk3288,
>
> Give me some time, I try to bringup my popmetal rk3288 board to do the test.
>
> Heiko, Thanks very much for your test.
Hi Heiko
After fix null pointer problem, On rk3288 popmetal board, hdmi works good on my test, Can you double check it?
Thanks.
>
>>
>>
>> Heiko
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>
>>
>>
>
>
--
?ark Yao
next prev parent reply other threads:[~2017-07-28 2:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 6:18 [PATCH v6 0/7] drm/rockchip: add all full framework vop support Mark Yao
2017-07-26 6:19 ` [PATCH v6 1/7] drm/rockchip: vop: initialize registers directly Mark Yao
2017-07-26 22:44 ` Heiko Stuebner
2017-07-27 8:31 ` [v6,1/7] " jeffy
2017-07-26 6:19 ` [PATCH v6 2/7] drm/rockchip: vop: move write_relaxed flags to vop register Mark Yao
2017-07-26 22:46 ` Heiko Stuebner
2017-07-27 8:43 ` [v6, " jeffy
2017-07-26 6:19 ` [PATCH v6 3/7] drm/rockchip: vop: move line_flag_num to interrupt registers Mark Yao
2017-07-26 22:50 ` Heiko Stuebner
2017-07-26 6:19 ` [PATCH v6 4/7] drm/rockchip: vop: group vop registers Mark Yao
2017-07-27 8:49 ` [v6,4/7] " jeffy
2017-07-27 9:51 ` [PATCH v6 4/7] " Heiko Stübner
2017-07-27 10:10 ` Heiko Stübner
2017-07-28 1:02 ` Mark yao
2017-07-28 2:45 ` Mark yao [this message]
2017-07-28 6:06 ` [PATCH v6.1 " Mark Yao
2017-07-28 9:21 ` Heiko Stuebner
2017-07-26 6:19 ` [PATCH v6 5/7] drm/rockchip: vop: add a series of vop support Mark Yao
2017-07-27 8:59 ` [v6,5/7] " jeffy
2017-07-28 12:48 ` [PATCH v6 5/7] " Heiko Stuebner
2017-07-26 6:19 ` [PATCH v6 6/7] dt-bindings: display: rockchip: fill Documents for vop series Mark Yao
2017-07-28 9:25 ` Heiko Stuebner
2017-07-26 6:19 ` [PATCH v6 7/7] drm/rockchip: vop: rk3328: fix overlay abnormal Mark Yao
2017-07-27 8:42 ` [v6,7/7] " jeffy
2017-07-28 13:06 ` [PATCH v6 7/7] " Heiko Stuebner
2017-07-31 1:02 ` [PATCH v6 0/7] drm/rockchip: add all full framework vop support Mark yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=597AA54D.60706@rock-chips.com \
--to=mark.yao@rock-chips$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox