Subject: Re: [PATCH 1/2] dt-bindings: soc: Add binding doc for iProc IDM device

From: Florian Fainelli <[email-masked]>
Date: Thu, 5 Dec 2019 16:09:48 -0800

On 12/2/19 3:31 PM, Ray Jui wrote:
> Add binding document for iProc based IDM devices.
> 
> Signed-off-by: Ray Jui <[email-masked]>

Looks good to me, it's 2019, nearly 2020, maybe make this a YAML
compatible binding since it is a new one?

> ---
>  .../bindings/soc/bcm/brcm,iproc-idm.txt       | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
> new file mode 100644
> index 000000000000..388c6b036d7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,iproc-idm.txt
> @@ -0,0 +1,44 @@
> +Broadcom iProc Interconnect Device Management (IDM) device
> +
> +The Broadcom iProc IDM device allows control and monitoring of ASIC internal
> +bus transactions. Most importantly, it can be configured to detect bus
> +transaction timeout. In such case, critical information such as transaction
> +address that caused the error, bus master ID of the transaction that caused
> +the error, and etc., are made available from the IDM device.
> +
> +-------------------------------------------------------------------------------
> +
> +Required properties for IDM device node:
> +- compatible: must be "brcm,iproc-idm"
> +- reg: base address and length of the IDM register space
> +- interrupt: IDM interrupt number
> +- brcm,iproc-idm-bus: IDM bus string
> +
> +Optional properties for IDM device node:
> +- brcm,iproc-idm-elog: phandle to the device node of the IDM logging device
> +
> +-------------------------------------------------------------------------------
> +
> +Required properties for IDM error logging device node:
> +- compatible: must be "brcm,iproc-idm-elog";
> +- reg: base address and length of reserved memory location where IDM error
> +  events can be saved
> +
> +-------------------------------------------------------------------------------
> +
> +Example:
> +
> +idm {
> +	idm-elog {
> +		compatible = "brcm,iproc-idm-elog";
> +		reg = <0x8f221000 0x1000>;
> +	};
> +
> +	idm-mhb-paxc-axi {
> +		compatible = "brcm,iproc-idm";
> +		reg = <0x60406900 0x200>;
> +		interrupt = <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>;
> +		brcm,iproc-idm-bus = "idm-mhb-paxc-axi";
> +		brcm,iproc-idm-elog = <&idm-elog>;
> +	};
> +};
> 

-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel