Subject: Re: [PATCH v5 09/18] thermal: sun8i: rework for ths calibrate func

From: Zhang Rui <[email-masked]>
Date: Wed, 28 Aug 2019 20:45:22 +0800

On Sat, 2019-08-10 at 05:28 +0000, Yangtao Li wrote:
> Here, we do something to prepare for the subsequent
> support of multiple platforms.
> 
> 1) rename sun50i_ths_calibrate to sun8i_ths_calibrate, because
>    this function should be suitable for all platforms now.
> 
> 2) introduce calibrate callback to mask calibration method
>    differences.
> 
> Signed-off-by: Yangtao Li <[email-masked]>

IMO, patch 4/18 to patch 9/18 are all changes to a new file introduced
in patch 1/18, so why not have a prettier patch 1/18 instead of
separate patches?

thanks,
rui

> ---
>  drivers/thermal/sun8i_thermal.c | 86 ++++++++++++++++++-------------
> --
>  1 file changed, 48 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/thermal/sun8i_thermal.c
> b/drivers/thermal/sun8i_thermal.c
> index 6f4294c2aba7..47c20c4c69e7 100644
> --- a/drivers/thermal/sun8i_thermal.c
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -60,6 +60,8 @@ struct ths_thermal_chip {
>  	int		scale;
>  	int		ft_deviation;
>  	int		temp_data_base;
> +	int		(*calibrate)(struct ths_device *tmdev,
> +				     u16 *caldata, int callen);
>  	int		(*init)(struct ths_device *tmdev);
>  	int             (*irq_ack)(struct ths_device *tmdev);
>  };
> @@ -152,45 +154,14 @@ static irqreturn_t sun8i_irq_thread(int irq,
> void *data)
>  	return IRQ_HANDLED;
>  }
>  
> -static int sun50i_ths_calibrate(struct ths_device *tmdev)
> +static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
> +				   u16 *caldata, int callen)
>  {
> -	struct nvmem_cell *calcell;
>  	struct device *dev = tmdev->dev;
> -	u16 *caldata;
> -	size_t callen;
> -	int ft_temp;
> -	int i, ret = 0;
> -
> -	calcell = devm_nvmem_cell_get(dev, "calib");
> -	if (IS_ERR(calcell)) {
> -		if (PTR_ERR(calcell) == -EPROBE_DEFER)
> -			return -EPROBE_DEFER;
> -		/*
> -		 * Even if the external calibration data stored in sid
> is
> -		 * not accessible, the THS hardware can still work,
> although
> -		 * the data won't be so accurate.
> -		 *
> -		 * The default value of calibration register is 0x800
> for
> -		 * every sensor, and the calibration value is usually
> 0x7xx
> -		 * or 0x8xx, so they won't be away from the default
> value
> -		 * for a lot.
> -		 *
> -		 * So here we do not return error if the calibartion
> data is
> -		 * not available, except the probe needs deferring.
> -		 */
> -		goto out;
> -	}
> +	int i, ft_temp;
>  
> -	caldata = nvmem_cell_read(calcell, &callen);
> -	if (IS_ERR(caldata)) {
> -		ret = PTR_ERR(caldata);
> -		goto out;
> -	}
> -
> -	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) {
> -		ret = -EINVAL;
> -		goto out_free;
> -	}
> +	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
> +		return -EINVAL;
>  
>  	/*
>  	 * efuse layout:
> @@ -245,7 +216,45 @@ static int sun50i_ths_calibrate(struct
> ths_device *tmdev)
>  				   cdata << offset);
>  	}
>  
> -out_free:
> +	return 0;
> +}
> +
> +static int sun8i_ths_calibrate(struct ths_device *tmdev)
> +{
> +	struct nvmem_cell *calcell;
> +	struct device *dev = tmdev->dev;
> +	u16 *caldata;
> +	size_t callen;
> +	int ret = 0;
> +
> +	calcell = devm_nvmem_cell_get(dev, "calib");
> +	if (IS_ERR(calcell)) {
> +		if (PTR_ERR(calcell) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		/*
> +		 * Even if the external calibration data stored in sid
> is
> +		 * not accessible, the THS hardware can still work,
> although
> +		 * the data won't be so accurate.
> +		 *
> +		 * The default value of calibration register is 0x800
> for
> +		 * every sensor, and the calibration value is usually
> 0x7xx
> +		 * or 0x8xx, so they won't be away from the default
> value
> +		 * for a lot.
> +		 *
> +		 * So here we do not return error if the calibartion
> data is
> +		 * not available, except the probe needs deferring.
> +		 */
> +		goto out;
> +	}
> +
> +	caldata = nvmem_cell_read(calcell, &callen);
> +	if (IS_ERR(caldata)) {
> +		ret = PTR_ERR(caldata);
> +		goto out;
> +	}
> +
> +	tmdev->chip->calibrate(tmdev, caldata, callen);
> +
>  	kfree(caldata);
>  out:
>  	return ret;
> @@ -294,7 +303,7 @@ static int sun8i_ths_resource_init(struct
> ths_device *tmdev)
>  	if (ret)
>  		goto bus_disable;
>  
> -	ret = sun50i_ths_calibrate(tmdev);
> +	ret = sun8i_ths_calibrate(tmdev);
>  	if (ret)
>  		goto mod_disable;
>  
> @@ -422,6 +431,7 @@ static const struct ths_thermal_chip
> sun50i_h6_ths = {
>  	.scale = -67,
>  	.ft_deviation = SUN50I_H6_FT_DEVIATION,
>  	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
> +	.calibrate = sun50i_h6_ths_calibrate,
>  	.init = sun50i_h6_thermal_init,
>  	.irq_ack = sun50i_h6_irq_ack,
>  };

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel