Subject: Re: [PATCH 1/2] dt-bindings: edac: Add DT bindings for Kryo EDAC

From: Sai Prakash Ranjan <[email-masked]>
Date: Thu, 19 Dec 2019 12:20:27 +0530

Hi Rob,

On 2019-12-19 05:07, Rob Herring wrote:
> On Thu, Dec 05, 2019 at 09:53:05AM +0000, Sai Prakash Ranjan wrote:
>> This adds DT bindings for Kryo EDAC implemented with RAS
>> extensions on KRYO{3,4}XX CPU cores for reporting of cache
>> errors.
>> 
>> Signed-off-by: Sai Prakash Ranjan <[email-masked]>
>> ---
>>  .../bindings/edac/qcom-kryo-edac.yaml         | 67 
>> +++++++++++++++++++
>>  1 file changed, 67 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml 
>> b/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
>> new file mode 100644
>> index 000000000000..1a39429a73b4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
>> @@ -0,0 +1,67 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/edac/qcom-kryo-edac.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Kryo Error Detection and Correction(EDAC)
>> +
>> +maintainers:
>> +  - Sai Prakash Ranjan <[email-masked]>
>> +
>> +description: |
>> +  Kryo EDAC is defined to describe on-chip error detection and 
>> correction
>> +  for the Kryo CPU cores which implement RAS extensions. It will 
>> report
>> +  all Single Bit Errors and Double Bit Errors found in L1/L2 caches 
>> in
>> +  in two registers ERXSTATUS_EL1 and ERXMISC0_EL1. L3-SCU cache 
>> errors
>> +  are reported in ERR1STATUS and ERR1MISC0 registers.
>> +    ERXSTATUS_EL1 - Selected Error Record Primary Status Register, 
>> EL1
>> +    ERXMISC0_EL1 - Selected Error Record Miscellaneous Register 0, 
>> EL1
>> +    ERR1STATUS - Error Record Primary Status Register
>> +    ERR1MISC0 - Error Record Miscellaneous Register 0
>> +  Current implementation of Kryo ECC(Error Correcting Code) mechanism 
>> is
>> +  based on interrupts.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,kryo-edac
>> +
>> +  interrupts:
>> +    minItems: 1
>> +    maxItems: 4
>> +    items:
>> +      - description: l1-l2 cache faultirq interrupt
>> +      - description: l1-l2 cache errirq interrupt
>> +      - description: l3-scu cache errirq interrupt
>> +      - description: l3-scu cache faultirq interrupt
>> +
>> +  interrupt-names:
>> +    minItems: 1
>> +    maxItems: 4
> 
> You are saying only these combinations are valid:
> 
> l1-l2-faultirq
> 
> l1-l2-faultirq
> l1-l2-errirq
> 
> l1-l2-faultirq
> l1-l2-errirq
> l3-scu-errirq
> 
> l1-l2-faultirq
> l1-l2-errirq
> l3-scu-errirq
> l3-scu-faultirq
> 
> Is that your intent?
> 

No, I want any combination of interrupts to be valid with atleast one 
interrupt as mandatory.
I thought specifying minItems as 1 and maxItems as 4 will take care of 
this,  am I doing something wrong?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel