From: matthias.bgg@gmail•com (Matthias Brugger)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
Date: Wed, 7 Feb 2018 12:31:40 +0100 [thread overview]
Message-ID: <7f7d3d94-7d4e-9b66-048a-e100a45a2137@gmail.com> (raw)
In-Reply-To: <98781a6d32fcc8d42e4646a183246e70d5139154.1517910489.git.sean.wang@mediatek.com>
On 02/06/2018 10:52 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek•com>
>
> add pinctrl device nodes and rfb1 board, additionally include all pin
> groups possible being used on rfb1 board and available gpio keys.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek•com>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> 2 files changed, 207 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index c08309d..bd1093a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -7,6 +7,8 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/input/input.h>
> +
> #include "mt7622.dtsi"
>
> / {
> @@ -17,11 +19,209 @@
> bootargs = "console=ttyS0,115200n1";
> };
>
> + gpio-keys {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> +
> + factory {
> + label = "factory";
> + linux,code = <BTN_0>;
> + gpios = <&pio 0 0>;
> + };
> +
> + wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&pio 102 0>;
> + };
> + };
> +
> memory {
> reg = <0 0x40000000 0 0x3F000000>;
> };
> };
>
> +&pio {
> + /* eMMC is shared pin with parallel NAND */
> + emmc_pins_default: emmc-pins-default {
> + mux {
> + function = "emmc", "emmc_rst";
> + groups = "emmc";
> + };
> + };
> +
> + emmc_pins_uhs: emmc-pins-uhs {
> + mux {
> + function = "emmc";
> + groups = "emmc";
> + };
> + };
> +
> + eth_pins: eth-pins {
> + mux {
> + function = "eth";
> + groups = "mdc_mdio", "rgmii_via_gmac2";
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c1_0";
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c2_0";
> + };
> + };
> +
> + i2s1_pins: i2s1-pins {
> + mux {
> + function = "i2s";
> + groups = "i2s_out_bclk_ws_mclk",
> + "i2s1_in_data",
> + "i2s1_out_data";
> + };
> + };
> +
> + irrx_pins: irrx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_rx";
> + };
> + };
> +
> + irtx_pins: irtx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_tx";
> + };
> + };
> +
> + /* Parallel nand is shared pin with eMMC */
> + parallel_nand_pins: parallel-nand-pins {
> + mux {
> + function = "flash";
> + groups = "par_nand";
> + };
> + };
> +
> + pcie0_pins: pcie0-pins {
> + mux {
> + groups = "pcie0_pad_perst",
> + "pcie0_1_waken",
> + "pcie0_1_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pcie1_pins: pcie1-pins {
> + mux {
> + groups = "pcie1_pad_perst",
> + "pcie1_0_waken",
> + "pcie1_0_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pmic_bus_pins: pmic-bus-pins {
> + mux {
> + groups = "pmic_bus";
> + function = "pmic";
> + };
> + };
Some bikeshedding here. Can you please add function before groups, so that it is
uniform through out the file?
Thanks,
Matthias
> +
> + pwm7_pins: pwm1-2-pins {
> + mux {
> + function = "pwm";
> + groups = "pwm_ch7_2";
> + };
> + };
> +
> + wled_pins: wled-pins {
> + mux {
> + function = "led";
> + groups = "wled";
> + };
> + };
> +
> + sd0_pins_default: sd0-pins-default {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + sd0_pins_uhs: sd0-pins-uhs {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + /* Serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + spic0_pins: spic0-pins {
> + mux {
> + function = "spi";
> + groups = "spic0_0";
> + };
> + };
> +
> + spic1_pins: spic1-pins {
> + mux {
> + function = "spi";
> + groups = "spic1_0";
> + };
> + };
> +
> + /* SPI-NOR is shared pin with serial NAND */
> + spi_nor_pins: spi-nor-pins {
> + mux {
> + function = "flash";
> + groups = "spi_nor";
> + };
> + };
> +
> + /* serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + mux {
> + function = "uart";
> + groups = "uart0_0_tx_rx" ;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + mux {
> + function = "uart";
> + groups = "uart2_1_tx_rx" ;
> + };
> + };
> +
> + watchdog_pins: watchdog-pins {
> + mux {
> + function = "watchdog";
> + groups = "watchdog";
> + };
> + };
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 81207e6..8211bf7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -147,6 +147,13 @@
> #clock-cells = <1>;
> };
>
> + pio: pinctrl at 10211000 {
> + compatible = "mediatek,mt7622-pinctrl";
> + reg = <0 0x10211000 0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> gic: interrupt-controller at 10300000 {
> compatible = "arm,gic-400";
> interrupt-controller;
>
next prev parent reply other threads:[~2018-02-07 11:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 9:52 [PATCH v2 00/16] add dts nodes to MT7622 SoC sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells sean.wang at mediatek.com
2018-02-07 10:45 ` Matthias Brugger
2018-02-09 3:38 ` Sean Wang
2018-02-06 9:52 ` [PATCH v2 02/16] arm64: dts: mt7622: add clock controller device nodes sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 03/16] arm64: dts: mt7622: add power domain " sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related " sean.wang at mediatek.com
2018-02-07 11:31 ` Matthias Brugger [this message]
2018-02-09 3:41 ` Sean Wang
2018-02-06 9:52 ` [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes sean.wang at mediatek.com
2018-02-08 14:46 ` Philippe Ombredanne
2018-02-06 9:52 ` [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes sean.wang at mediatek.com
2018-02-07 3:33 ` Viresh Kumar
2018-02-07 6:16 ` Sean Wang
2018-02-07 6:18 ` Viresh Kumar
2018-02-07 8:34 ` Sean Wang
2018-02-06 9:52 ` [PATCH v2 07/16] arm64: dts: mt7622: turn uart0 clock to real ones sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 08/16] arm64: dts: mt7622: add SoC and peripheral related device nodes sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 09/16] arm64: dts: mt7622: add flash " sean.wang at mediatek.com
2018-02-06 9:52 ` [PATCH v2 10/16] arm64: dts: mt7622: add ethernet " sean.wang at mediatek.com
2018-02-06 9:53 ` [PATCH v2 11/16] arm64: dts: mt7622: add PCIe " sean.wang at mediatek.com
2018-02-06 9:53 ` [PATCH v2 12/16] arm64: dts: mt7622: add SATA " sean.wang at mediatek.com
2018-02-06 9:53 ` [PATCH v2 13/16] arm64: dts: mt7622: add usb " sean.wang at mediatek.com
2018-02-06 9:53 ` [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes sean.wang at mediatek.com
2018-02-07 11:43 ` Matthias Brugger
2018-02-09 3:51 ` Sean Wang
2018-02-12 11:55 ` Matthias Brugger
2018-02-06 9:53 ` [PATCH v2 15/16] arm64: dts: mt7622: add High-Speed DMA device nodes sean.wang at mediatek.com
2018-02-06 9:53 ` [PATCH v2 16/16] arm64: dts: mt7622: add mmc related " sean.wang at mediatek.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7f7d3d94-7d4e-9b66-048a-e100a45a2137@gmail.com \
--to=matthias.bgg@gmail$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox