From: khilman@baylibre•com (Kevin Hilman)
To: linux-arm-kernel@lists•infradead.org
Subject: [GIT PULL] Amlogic 64-bit DT changes for v4.10
Date: Tue, 15 Nov 2016 15:28:06 -0800 [thread overview]
Message-ID: <7hpolw2uih.fsf@baylibre.com> (raw)
Arnd, Olof,
Here are the arm64 DT changes for Amlogic family SoCs.
Please pull,
Thanks,
Kevin
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to ab5b24fdd2d551ea729e8e19e47811a646260331:
ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes (2016-11-15 12:05:54 -0800)
----------------------------------------------------------------
Amlogic DT changes for 64-bit platforms for v4.10
Support for new drivers:
- USB
- i2c
- SPI
- mailbox/MHU
- PWM
- ethernet MAC, PHY
- secure monitor
- IR
- watchdog
----------------------------------------------------------------
Andreas F?rber (1):
ARM64: dts: amlogic: Reorder copyrights for meson-gx
Brian Kim (1):
ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
Carlo Caione (1):
ARM64: dts: amlogic: Add basic support for Amlogic S905X
Kevin Hilman (1):
ARM64: dts: meson-gxbb: add MMC support
Martin Blumenstingl (1):
ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes
Neil Armstrong (22):
ARM64: dts: amlogic: Add Meson GX dtsi from GXBB
ARM64: dts: amlogic: Add basic support for Amlogic S905D
devicetree: Add vendor prefix for Nexbox
ARM64: dts: meson-gxbb: Add support for the Nexbox A95X Board
ARM64: dts: meson-gx: Add missing L2 cache node
ARM64: dts: meson-gxbb: Add rmii pinctrl node and rename rgmii node
ARM64: dts: meson-gxbb: Add Wifi 32K clock for p20x boards
ARM64: dts: meson-gxbb: Add P20x Wifi SDIO support
ARM64: dts: meson-gxbb: Add MMC nodes to Nexbox A95x
ARM64: dts: meson-gxbb: Add SRAM node
ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
ARM64: dts: meson-gxbb: Move common nodes to meson-gx
ARM64: dts: meson-gxl: Add pinctrl nodes
ARM64: dts: meson-gxl: Add clock nodes
ARM64: dts: meson-gxl: Add i2c nodes
ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
ARM64: dts: meson-gxl-p23x: Add uart pinctrl
ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
ARM64: dts: meson-gxl-p23x: Enable IR receiver
ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
ARM64: dts: meson-gxl-p23x: Enable ethernet
ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY
Documentation/devicetree/bindings/arm/amlogic.txt | 11 ++
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 4 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 360 ++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 231 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 119 +++++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 129 +++++++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 106 ++++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 900 +++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 76 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts | 57 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 188 +++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi | 48 +++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 69 ++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 54 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 301 ++++++++++++++++++++++++++++++++++++++++
16 files changed, 2120 insertions(+), 534 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
next reply other threads:[~2016-11-15 23:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-15 23:28 Kevin Hilman [this message]
2016-11-19 0:52 ` [GIT PULL] Amlogic 64-bit DT changes for v4.10 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hpolw2uih.fsf@baylibre.com \
--to=khilman@baylibre$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox