Subject: Re: [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610

From: Kevin Hilman <[email-masked]>
Date: Tue, 20 Aug 2019 13:32:40 -0700

Martin Blumenstingl <[email-masked]> writes:

> Hi Neil,
>
> On Tue, Aug 20, 2019 at 4:43 PM Neil Armstrong <[email-masked]> wrote:
>>
>> Add support for the Amlogic SM1 Based SEI610 board.
>>
>> The SM1 SoC is a derivative of the G12A SoC Family with :
>> - Cortex-A55 core instead of A53
>> - more power domains, including USB & PCIe
>> - a neural network co-processor (NNA)
>> - a CSI input and image processor
>> - some changes in the audio complex, thus not yet enabled
>>
>> The SEI610 board is a derivative of the SEI510 board with :
>> - removed ADC based touch button, replaced with 3x GPIO buttons
>> - physical switch disabling on-board MICs
>> - USB-C port for USB 2.0 OTG
>> - On-board FTDI USB2SERIAL port for Linux console
>>
>> Audio, Display and USB support will be added later when support of the
>> corresponding power domains will be added, for now they are kept disabled.
>>
>> Signed-off-by: Neil Armstrong <[email-masked]>
> I don't have any details about this board but overall this looks sane, so:
> Acked-by: Martin Blumenstingl <[email-masked]>
>
> [...]
>> +       /* Used by Tuner, RGB Led & IR Emitter LED array */
>> +       vddao_3v3_t: regultor-vddao_3v3_t {
> that should be regulator-vddao_3v3_t - maybe Kevin can fix this up, if
> not then we can still fix it with a follow-up patch

I fixed it up while applying,

Kevin

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel