Subject: [PATCH 02/10] phy: Add configuration interface

From: [email-masked] (Laurent Pinchart)
Date: Wed, 05 Sep 2018 16:39:46 +0300

Hi Maxime,

Thank you for the patch.

On Wednesday, 5 September 2018 12:16:33 EEST Maxime Ripard wrote:
> The phy framework is only allowing to configure the power state of the PHY
> using the init and power_on hooks, and their power_off and exit
> counterparts.
> 
> While it works for most, simple, PHYs supported so far, some more advanced
> PHYs need some configuration depending on runtime parameters. These PHYs
> have been supported by a number of means already, often by using ad-hoc
> drivers in their consumer drivers.
> 
> That doesn't work too well however, when a consumer device needs to deal

s/deal/deal with/

> multiple PHYs, or when multiple consumers need to deal with the same PHY (a
> DSI driver and a CSI driver for example).
> 
> So we'll add a new interface, through two funtions, phy_validate and
> phy_configure. The first one will allow to check that a current
> configuration, for a given mode, is applicable. It will also allow the PHY
> driver to tune the settings given as parameters as it sees fit.
> 
> phy_configure will actually apply that configuration in the phy itself.
> 
> Signed-off-by: Maxime Ripard <[email-masked]>
> ---
>  drivers/phy/phy-core.c  | 62 ++++++++++++++++++++++++++++++++++++++++++-
>  include/linux/phy/phy.h | 42 ++++++++++++++++++++++++++++-
>  2 files changed, 104 insertions(+)
> 
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index 35fd38c5a4a1..6eaf655e370f 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -408,6 +408,68 @@ int phy_calibrate(struct phy *phy)
>  EXPORT_SYMBOL_GPL(phy_calibrate);
> 
>  /**
> + * phy_configure() - Changes the phy parameters
> + * @phy: the phy returned by phy_get()
> + * @mode: phy_mode the configuration is applicable to.
> + * @opts: New configuration to apply
> + *
> + * Used to change the PHY parameters. phy_init() must have
> + * been called on the phy.
> + *
> + * Returns: 0 if successful, an negative error code otherwise
> + */
> +int phy_configure(struct phy *phy, enum phy_mode mode,
> +		  union phy_configure_opts *opts)
> +{
> +	int ret;
> +
> +	if (!phy)
> +		return -EINVAL;
> +
> +	if (!phy->ops->configure)
> +		return 0;

Shouldn't you report an error to the caller ? If a caller expects the PHY to 
be configurable, I would assume that silently ignoring the requested 
configuration won't work great.

> +	mutex_lock(&phy->mutex);
> +	ret = phy->ops->configure(phy, mode, opts);
> +	mutex_unlock(&phy->mutex);
> +
> +	return ret;
> +}
> +
> +/**
> + * phy_validate() - Checks the phy parameters
> + * @phy: the phy returned by phy_get()
> + * @mode: phy_mode the configuration is applicable to.
> + * @opts: Configuration to check
> + *
> + * Used to check that the current set of parameters can be handled by
> + * the phy. Implementations are free to tune the parameters passed as
> + * arguments if needed by some implementation detail or
> + * constraints. It will not change any actual configuration of the
> + * PHY, so calling it as many times as deemed fit will have no side
> + * effect.
> + *
> + * Returns: 0 if successful, an negative error code otherwise
> + */
> +int phy_validate(struct phy *phy, enum phy_mode mode,
> +		  union phy_configure_opts *opts)
> +{
> +	int ret;
> +
> +	if (!phy)
> +		return -EINVAL;
> +
> +	if (!phy->ops->validate)
> +		return 0;
> +
> +	mutex_lock(&phy->mutex);
> +	ret = phy->ops->validate(phy, mode, opts);
> +	mutex_unlock(&phy->mutex);
> +
> +	return ret;
> +}
> +
> +/**
>   * _of_phy_get() - lookup and obtain a reference to a phy by phandle
>   * @np: device_node for which to get the phy
>   * @index: the index of the phy
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 9cba7fe16c23..3cc315dcfcd0 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -44,6 +44,12 @@ enum phy_mode {
>  };
> 
>  /**
> + * union phy_configure_opts - Opaque generic phy configuration
> + */
> +union phy_configure_opts {
> +};
> +
> +/**
>   * struct phy_ops - set of function pointers for performing phy operations
>   * @init: operation to be performed for initializing phy
>   * @exit: operation to be performed while exiting
> @@ -60,6 +66,38 @@ struct phy_ops {
>  	int	(*power_on)(struct phy *phy);
>  	int	(*power_off)(struct phy *phy);
>  	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
> +
> +	/**
> +	 * @configure:
> +	 *
> +	 * Optional.
> +	 *
> +	 * Used to change the PHY parameters. phy_init() must have
> +	 * been called on the phy.
> +	 *
> +	 * Returns: 0 if successful, an negative error code otherwise
> +	 */
> +	int	(*configure)(struct phy *phy, enum phy_mode mode,
> +			     union phy_configure_opts *opts);

Is this function allowed to modify opts ? If so, to what extent ? If not, the 
pointer should be made const.

> +	/**
> +	 * @validate:
> +	 *
> +	 * Optional.
> +	 *
> +	 * Used to check that the current set of parameters can be
> +	 * handled by the phy. Implementations are free to tune the
> +	 * parameters passed as arguments if needed by some
> +	 * implementation detail or constraints. It must not change
> +	 * any actual configuration of the PHY, so calling it as many
> +	 * times as deemed fit by the consumer must have no side
> +	 * effect.
> +	 *
> +	 * Returns: 0 if the configuration can be applied, an negative
> +	 * error code otherwise

When should this operation modify the passed parameters, and when should it 
return an error ? I understand that your goal is to implement a negotiation 
mechanism for the PHY parameters, and to be really useful I think we need to 
document it more precisely.

> +	 */
> +	int	(*validate)(struct phy *phy, enum phy_mode mode,
> +			    union phy_configure_opts *opts);
>  	int	(*reset)(struct phy *phy);
>  	int	(*calibrate)(struct phy *phy);
>  	struct module *owner;
> @@ -164,6 +202,10 @@ int phy_exit(struct phy *phy);
>  int phy_power_on(struct phy *phy);
>  int phy_power_off(struct phy *phy);
>  int phy_set_mode(struct phy *phy, enum phy_mode mode);
> +int phy_configure(struct phy *phy, enum phy_mode mode,
> +		  union phy_configure_opts *opts);
> +int phy_validate(struct phy *phy, enum phy_mode mode,
> +		 union phy_configure_opts *opts);
>  static inline enum phy_mode phy_get_mode(struct phy *phy)
>  {
>  	return phy->attrs.mode;

-- 
Regards,

Laurent Pinchart