Subject: [PATCH 1/2 V6] irqchip: gic: Add supports for ARM GICv2m MSI(-X)

From: [email-masked] (Marc Zyngier)
Date: Mon, 15 Sep 2014 20:26:20 +0100

On Sun, Sep 14 2014 at 07:30:15 AM, "suravee.suthikulpanit at amd.com" <[email-masked]> wrote:

Hi Suravee,

> From: Suravee Suthikulpanit <[email-masked]>
>
> ARM GICv2m specification extends GICv2 to support MSI(-X) with
> a new set of register frame. This patch introduces support for
> the non-secure GICv2m register frame. Currently, GICV2m is available
> in certain version of GIC-400.
>
> The patch introduces a new property in ARM gic binding, the v2m subnode.
> It is optional.

Overall, this looks much better than the previous versions I've
reviewed. There is still a number of points I'd like to see addressed,
see below.

>
> Signed-off-by: Suravee Suthikulpanit <[email-masked]>
> Cc: Mark Rutland <[email-masked]>
> Cc: Marc Zyngier <[email-masked]>
> Cc: Jason Cooper <[email-masked]>
> Cc: Catalin Marinas <[email-masked]>
> Cc: Will Deacon <[email-masked]>
> ---
>  Documentation/devicetree/bindings/arm/gic.txt |  39 ++++
>  drivers/irqchip/Kconfig                       |   7 +
>  drivers/irqchip/Makefile                      |   1 +
>  drivers/irqchip/irq-gic-v2m.c                 | 261 ++++++++++++++++++++++++++
>  drivers/irqchip/irq-gic.c                     |  88 ++++++---
>  drivers/irqchip/irq-gic.h                     |  51 +++++
>  6 files changed, 419 insertions(+), 28 deletions(-)
>  create mode 100644 drivers/irqchip/irq-gic-v2m.c
>  create mode 100644 drivers/irqchip/irq-gic.h
>
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index c7d2fa1..a461591 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -96,3 +96,42 @@ Example:
>                       <0x2c006000 0x2000>;
>                 interrupts = <1 9 0xf04>;
>         };
> +
> +
> +* GICv2m extension for MSI/MSI-x support (Optional)
> +
> +Certain revision of GIC-400 supports MSI/MSI-x via V2M register frame.
> +This is enabled by specifying v2m sub-node.
> +
> +Required properties:
> +
> +- msi-controller : Identifies the node as an MSI controller.
> +
> +- reg : GICv2m MSI interface register base and size
> +
> +Example:
> +
> +       interrupt-controller at e1101000 {
> +               compatible = "arm,gic-400";
> +               #interrupt-cells = <3>;
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               interrupt-controller;
> +               interrupts = <1 8 0xf04>;
> +               ranges = <0 0 0 0xe1100000 0 0x100000>;
> +               reg = <0x0 0xe1110000 0 0x01000>,
> +                     <0x0 0xe112f000 0 0x02000>,
> +                     <0x0 0xe1140000 0 0x10000>,
> +                     <0x0 0xe1160000 0 0x10000>;
> +               v2m0 {

I believe the convention is to have
		v2m0 : v2m at 0x80000 {

> +                       msi-controller;
> +                       reg = <0x0 0x80000 0 0x1000>;

I think having a "compatible" property would be nice, and would help
handle variants if they ever happen.

> +               };
> +
> +               ....
> +
> +               v2mN {
> +                       msi-controller;
> +                       reg = <0x0 0x90000 0 0x1000>;
> +               };
> +       };
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index b8632bf..ddb31ee 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -7,6 +7,13 @@ config ARM_GIC
>         select IRQ_DOMAIN
>         select MULTI_IRQ_HANDLER
>
> +config ARM_GIC_V2M
> +       bool
> +       select IRQ_DOMAIN
> +       select MULTI_IRQ_HANDLER
> +       depends on ARM_GIC
> +       depends on PCI && PCI_MSI
> +
>  config GIC_NON_BANKED
>         bool
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 73052ba..3bda951 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_SUNXI)              += irq-sun4i.o
>  obj-$(CONFIG_ARCH_SUNXI)               += irq-sunxi-nmi.o
>  obj-$(CONFIG_ARCH_SPEAR3XX)            += spear-shirq.o
>  obj-$(CONFIG_ARM_GIC)                  += irq-gic.o irq-gic-common.o
> +obj-$(CONFIG_ARM_GIC_V2M)              += irq-gic-v2m.o
>  obj-$(CONFIG_ARM_GIC_V3)               += irq-gic-v3.o irq-gic-common.o
>  obj-$(CONFIG_ARM_NVIC)                 += irq-nvic.o
>  obj-$(CONFIG_ARM_VIC)                  += irq-vic.o
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> new file mode 100644
> index 0000000..499bfb9
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -0,0 +1,261 @@
> +/*
> + * ARM GIC v2m MSI(-X) support
> + * Support for Message Signaled Interrupts for systems that
> + * implement ARM Generic Interrupt Controller: GICv2m.
> + *
> + * Copyright (C) 2014 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <[email-masked]>
> + *          Harish Kasiviswanathan <[email-masked]>
> + *          Brandon Anderson <[email-masked]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "GICv2m: " fmt
> +
> +#include <linux/bitmap.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#include "irqchip.h"
> +#include "irq-gic.h"
> +
> +/*
> +* MSI_TYPER:
> +*     [31:26] Reserved
> +*     [25:16] lowest SPI assigned to MSI
> +*     [15:10] Reserved
> +*     [9:0]   Numer of SPIs assigned to MSI
> +*/
> +#define V2M_MSI_TYPER                  0x008
> +#define V2M_MSI_TYPER_BASE_SHIFT       16
> +#define V2M_MSI_TYPER_BASE_MASK                0x3FF
> +#define V2M_MSI_TYPER_NUM_MASK         0x3FF
> +#define V2M_MSI_SETSPI_NS              0x040
> +#define V2M_MIN_SPI                    32
> +#define V2M_MAX_SPI                    1019
> +
> +/*
> + * alloc_msi_irq - Allocate MSIs from available MSI bitmap.
> + * @data: Pointer to v2m_data
> + * @nvec: Number of interrupts to allocate
> + * @irq: Pointer to the allocated irq
> + *
> + * Allocates interrupts only if the contiguous range of MSIs
> + * with specified nvec are available. Otherwise return the number
> + * of available interrupts. If none are available, then returns -ENOENT.
> + */
> +static int alloc_msi_irq(struct v2m_data *data, int nvec, int *irq)
> +{
> +       int size = data->nr_spis;
> +       int next = size, i = nvec, ret;
> +
> +       /* We should never allocate more than available nr_spis */
> +       if (i >= size)
> +               i = size;
> +
> +       spin_lock(&data->msi_cnt_lock);
> +
> +       for (; i > 0; i--) {
> +               next = bitmap_find_next_zero_area(data->bm,
> +                                       size, 0, i, 0);
> +               if (next < size)
> +                       break;
> +       }
> +
> +       if (i != nvec) {
> +               ret = i ? : -ENOENT;
> +       } else {
> +               bitmap_set(data->bm, next, nvec);
> +               *irq = data->spi_start + next;
> +               ret = 0;
> +       }
> +
> +       spin_unlock(&data->msi_cnt_lock);
> +
> +       return ret;
> +}
> +
> +static void gicv2m_teardown_msi_irq(struct msi_chip *chip, unsigned int irq)
> +{
> +       int pos;
> +       struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
> +
> +       spin_lock(&data->msi_cnt_lock);
> +
> +       pos = irq - data->spi_start;
> +       if (pos >= 0 && pos < data->nr_spis)
> +               bitmap_clear(data->bm, pos, 1);
> +
> +       spin_unlock(&data->msi_cnt_lock);
> +}
> +
> +static int gicv2m_setup_msi_irq(struct msi_chip *chip,
> +                               struct pci_dev *pdev,
> +                               struct msi_desc *desc)
> +{
> +       int irq, avail;
> +       struct msi_msg msg;
> +       phys_addr_t addr;
> +       struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
> +
> +       if (!desc) {
> +               dev_err(&pdev->dev,
> +                       "GICv2m: MSI setup failed. Invalid msi descriptor\n");

Isn't the "GICv2m" header already provided by the pr_fmt at the
beginning of the file?

> +               return -EINVAL;
> +       }
> +
> +       avail = alloc_msi_irq(data, 1, &irq);
> +       if (avail != 0) {
> +               dev_err(&pdev->dev,
> +                       "GICv2m: MSI setup failed. Cannnot allocate IRQ\n");
> +               return -ENOSPC;
> +       }
> +
> +       irq_set_chip_data(irq, chip);
> +       irq_set_msi_desc(irq, desc);
> +       irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
> +
> +       addr = data->res.start + V2M_MSI_SETSPI_NS;
> +       msg.address_hi = (u32)(addr >> 32);
> +       msg.address_lo = (u32)(addr);
> +       msg.data = irq;
> +       write_msi_msg(irq, &msg);
> +
> +       return 0;
> +}
> +
> +static void gicv2m_mask_irq(struct irq_data *d)
> +{
> +       gic_mask_irq(d);
> +       if (d->msi_desc)
> +               mask_msi_irq(d);
> +}
> +
> +static void gicv2m_unmask_irq(struct irq_data *d)
> +{
> +       gic_unmask_irq(d);
> +       if (d->msi_desc)
> +               unmask_msi_irq(d);
> +}
> +
> +#ifdef CONFIG_OF

I think you can loose the CONFIG_OF here. There is no valid
configuration without OF on arm64.

> +
> +static int __init
> +v2m_init(struct device_node *node, struct v2m_data *v2m,
> +                 struct resource *res)
> +{
> +       int ret;
> +       unsigned int typer;
> +
> +       v2m->msi_chip.owner = THIS_MODULE;
> +       v2m->msi_chip.of_node = node;
> +       v2m->msi_chip.setup_irq = gicv2m_setup_msi_irq;
> +       v2m->msi_chip.teardown_irq = gicv2m_teardown_msi_irq;
> +       ret = of_pci_msi_chip_add(&v2m->msi_chip);
> +       if (ret) {
> +               pr_info("Failed to add msi_chip.\n");
> +               return ret;
> +       }
> +
> +       v2m->base = ioremap(res->start, resource_size(res));
> +       if (!v2m->base) {
> +               pr_err("Failed to map GICv2m resource\n");
> +               return -EINVAL;

Beware, you're leaving with a registered msi_chip. You probably want to
remove it on the error path.

> +       }
> +
> +       memcpy(&v2m->res, res, sizeof(struct resource));
> +
> +       typer = readl_relaxed(v2m->base + V2M_MSI_TYPER);
> +       if (!typer) {
> +               pr_warn("Failed to read V2M_MSI_TYPER register\n");
> +               return -EINVAL;

And here leaving the v2m widget mapped.

> +       }
> +
> +       v2m->spi_start = (typer >> V2M_MSI_TYPER_BASE_SHIFT) &
> +                               V2M_MSI_TYPER_BASE_MASK;
> +       v2m->nr_spis = typer & V2M_MSI_TYPER_NUM_MASK;
> +       if ((v2m->spi_start < V2M_MIN_SPI) || (v2m->nr_spis >= V2M_MAX_SPI)) {
> +                       pr_err("Invalid MSI_TYPER (%#x)\n", typer);
> +                       return -EINVAL;

Blah. The whole error handling of this function is b0rked.

> +       }
> +
> +       v2m->bm = kzalloc(sizeof(long) * BITS_TO_LONGS(v2m->nr_spis),
> +                         GFP_KERNEL);
> +       if (!v2m->bm) {
> +               pr_err("Failed to allocate MSI bitmap\n");
> +               return -ENOMEM;
> +       }
> +
> +       spin_lock_init(&v2m->msi_cnt_lock);
> +
> +       pr_info("SPI range [%d:%d]\n",
> +               v2m->spi_start, (v2m->spi_start + v2m->nr_spis));
> +
> +       return 0;
> +}
> +
> +int __init gicv2m_of_init(struct device_node *node,
> +                         struct gic_chip_data *gic,
> +                         struct irq_chip *v2m_chip)
> +{
> +       int ret = 0;
> +       struct v2m_data *v2m;
> +       struct resource res;
> +       struct device_node *child = NULL;
> +
> +       INIT_LIST_HEAD(&gic->v2m_list);
> +
> +       for (;;) {
> +               child = of_get_next_child(node, child);

I don't see any of_node_put() in this function. You'll need to fix
this...

> +               if (!child)
> +                       break;
> +
> +               if (!of_find_property(child, "msi-controller", NULL))
> +                       continue;
> +
> +               ret = of_address_to_resource(child, 0, &res);
> +               if (ret) {
> +                       pr_err("Failed to allocate v2m resource.\n");
> +                       break;
> +               }
> +
> +               v2m = kzalloc(sizeof(struct v2m_data), GFP_KERNEL);
> +               if (!v2m) {
> +                       pr_err("Failed to allocate struct v2m_data.\n");
> +                       return -ENOMEM;
> +               }
> +
> +               ret = v2m_init(child, v2m, &res);
> +               if (ret)
> +                       break;
> +
> +               v2m->gic = gic;
> +
> +               pr_info(" %s: [%lx : %lx]\n", child->name,
> +                       (unsigned long)res.start, (unsigned long)res.end);
> +
> +               list_add_tail(&v2m->list, &gic->v2m_list);
> +       }
> +
> +       if (ret && list_empty(&gic->v2m_list)) {
> +               pr_err("MSI resource not found\n");
> +               return -EINVAL;
> +       }
> +
> +       v2m_chip->irq_mask = gicv2m_mask_irq;
> +       v2m_chip->irq_unmask = gicv2m_unmask_irq;
> +

Again, the whole error handling is evil. You can end-up allocating a few
v2m structures, registering them, and yet have kzalloc failing at some
point. At that stage, you exit early, not setting the mas/unmask
methods. Boom.

> +       return ret;
> +}
> +
> +#endif /* CONFIG_OF */
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 4b959e6..f490599 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -46,30 +46,9 @@
>  #include <asm/smp_plat.h>
>
>  #include "irq-gic-common.h"
> +#include "irq-gic.h"
>  #include "irqchip.h"
>
> -union gic_base {
> -       void __iomem *common_base;
> -       void __percpu * __iomem *percpu_base;
> -};
> -
> -struct gic_chip_data {
> -       union gic_base dist_base;
> -       union gic_base cpu_base;
> -#ifdef CONFIG_CPU_PM
> -       u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
> -       u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
> -       u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
> -       u32 __percpu *saved_ppi_enable;
> -       u32 __percpu *saved_ppi_conf;
> -#endif
> -       struct irq_domain *domain;
> -       unsigned int gic_irqs;
> -#ifdef CONFIG_GIC_NON_BANKED
> -       void __iomem *(*get_base)(union gic_base *);
> -#endif
> -};
> -
>  static DEFINE_RAW_SPINLOCK(irq_controller_lock);
>
>  /*
> @@ -131,15 +110,36 @@ static inline void gic_set_base_accessor(struct gic_chip_data *data,
>  #define gic_set_base_accessor(d, f)
>  #endif
>
> +static inline
> +struct gic_chip_data *irq_data_get_gic_chip_data(struct irq_data *d)
> +{
> +       struct gic_chip_data *gic_data;
> +       struct msi_chip *mchip;
> +       struct v2m_data *v2mdat;
> +
> +       /*
> +        * For MSI, irq_data.chip_data points to struct msi_chip.
> +        * For non-MSI, irq_data.chip_data points to struct gic_chip_data.
> +        */
> +       if (d->msi_desc) {
> +               mchip = irq_data_get_irq_chip_data(d);
> +               v2mdat = container_of(mchip, struct v2m_data, msi_chip);
> +               gic_data = v2mdat->gic;
> +       } else {
> +               gic_data = irq_data_get_irq_chip_data(d);
> +       }
> +       return gic_data;
> +}
> +
>  static inline void __iomem *gic_dist_base(struct irq_data *d)
>  {
> -       struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
> +       struct gic_chip_data *gic_data = irq_data_get_gic_chip_data(d);
>         return gic_data_dist_base(gic_data);
>  }
>
>  static inline void __iomem *gic_cpu_base(struct irq_data *d)
>  {
> -       struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
> +       struct gic_chip_data *gic_data = irq_data_get_gic_chip_data(d);
>         return gic_data_cpu_base(gic_data);
>  }
>
> @@ -151,7 +151,7 @@ static inline unsigned int gic_irq(struct irq_data *d)
>  /*
>   * Routines to acknowledge, disable and enable interrupts
>   */
> -static void gic_mask_irq(struct irq_data *d)
> +void gic_mask_irq(struct irq_data *d)

I'm still very uncomfortable with exporting the mask/unmask methods
outside of this file... Maybe it is not a big deal, but I see evil
everywhere.

>  {
>         u32 mask = 1 << (gic_irq(d) % 32);
>
> @@ -162,7 +162,7 @@ static void gic_mask_irq(struct irq_data *d)
>         raw_spin_unlock(&irq_controller_lock);
>  }
>
> -static void gic_unmask_irq(struct irq_data *d)
> +void gic_unmask_irq(struct irq_data *d)
>  {
>         u32 mask = 1 << (gic_irq(d) % 32);
>
> @@ -325,6 +325,15 @@ static struct irq_chip gic_chip = {
>         .irq_set_wake           = gic_set_wake,
>  };
>
> +static struct irq_chip v2m_chip = {
> +       .name                   = "GICv2m",
> +       .irq_eoi                = gic_eoi_irq,
> +       .irq_set_type           = gic_set_type,
> +#ifdef CONFIG_SMP
> +       .irq_set_affinity       = gic_set_affinity,
> +#endif
> +};
> +
>  void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
>  {
>         if (gic_nr >= MAX_GIC_NR)
> @@ -767,6 +776,24 @@ void __init gic_init_physaddr(struct device_node *node)
>  static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
>                                 irq_hw_number_t hw)
>  {
> +       struct gic_chip_data *gic = d->host_data;
> +       struct v2m_data *v2m;
> +
> +       irq_set_chip_data(irq, gic);
>
> +#ifdef CONFIG_ARM_GIC_V2M
> +       list_for_each_entry(v2m, &gic->v2m_list, list) {
> +               if (hw >= v2m->spi_start &&
> +                   hw <  v2m->spi_start + v2m->nr_spis) {
> +
> +                       irq_set_chip_and_handler(irq, &v2m_chip,
> +                                        handle_fasteoi_irq);
> +                       set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
> +                       return 0;
> +               }
> +       }
> +#endif
> +
>         if (hw < 32) {
>                 irq_set_percpu_devid(irq);
>                 irq_set_chip_and_handler(irq, &gic_chip,
> @@ -779,7 +806,6 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
>
>                 gic_routable_irq_domain_ops->map(d, irq, hw);
>         }
> -       irq_set_chip_data(irq, d->host_data);

These two hunks make the code a bit hard to read:
- First, message-based SPIs,
- Then PPIs
- and finally the rest of the SPIs.

Can you come up with a construct that keeps everything in a logical
order (PPIs, and then SPIs)? Not a big deal but it would make the code
nicer.

>         return 0;
>  }
>
> @@ -996,7 +1022,7 @@ gic_of_init(struct device_node *node, struct device_node *parent)
>         void __iomem *cpu_base;
>         void __iomem *dist_base;
>         u32 percpu_offset;
> -       int irq;
> +       int irq, ret;
>
>         if (WARN_ON(!node))
>                 return -ENODEV;
> @@ -1010,6 +1036,12 @@ gic_of_init(struct device_node *node, struct device_node *parent)
>         if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
>                 percpu_offset = 0;
>
> +       if (IS_ENABLED(CONFIG_ARM_GIC_V2M)) {
> +               ret = gicv2m_of_init(node, &gic_data[gic_cnt], &v2m_chip);
> +               if (ret)
> +                       pr_warn("Warning: Failed to enable GICv2m support.\n");
> +       }
> +
>         gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
>         if (!gic_cnt)
>                 gic_init_physaddr(node);
> diff --git a/drivers/irqchip/irq-gic.h b/drivers/irqchip/irq-gic.h
> new file mode 100644
> index 0000000..1f4a2b0
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic.h
> @@ -0,0 +1,51 @@
> +#ifndef _IRQ_GIC_H_
> +#define _IRQ_GIC_H_
> +
> +#include <linux/msi.h>
> +#include <linux/pci.h>
> +
> +union gic_base {
> +       void __iomem *common_base;
> +       void __percpu * __iomem *percpu_base;
> +};
> +
> +struct gic_chip_data;
> +
> +struct v2m_data {
> +#ifdef CONFIG_ARM_GIC_V2M
> +       struct list_head list;
> +       spinlock_t msi_cnt_lock;
> +       struct msi_chip msi_chip;
> +       struct resource res;      /* GICv2m resource */
> +       void __iomem *base;       /* GICv2m virt address */
> +       unsigned int spi_start;   /* The SPI number that MSIs start */
> +       unsigned int nr_spis;     /* The number of SPIs for MSIs */
> +       unsigned long *bm;        /* MSI vector bitmap */
> +       struct gic_chip_data *gic;
> +#endif
> +};
> +
> +struct gic_chip_data {
> +       union gic_base dist_base;
> +       union gic_base cpu_base;
> +#ifdef CONFIG_CPU_PM
> +       u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
> +       u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
> +       u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
> +       u32 __percpu *saved_ppi_enable;
> +       u32 __percpu *saved_ppi_conf;
> +#endif
> +       struct irq_domain *domain;
> +       unsigned int gic_irqs;
> +#ifdef CONFIG_GIC_NON_BANKED
> +       void __iomem *(*get_base)(union gic_base *);
> +#endif
> +       struct list_head v2m_list;
> +};

Maybe wrap this list_head around #ifdef/#endif?

> +
> +void gic_mask_irq(struct irq_data *d);
> +void gic_unmask_irq(struct irq_data *d);
> +int gicv2m_of_init(struct device_node *node, struct gic_chip_data *gic,
> +                  struct irq_chip *v2m_chip) __init;
> +
> +#endif /* _IRQ_GIC_H_ */
> --
> 1.9.3
>
>
-- 
Jazz is not dead. It just smells funny.