From: robert.jarzmik@free•fr (Robert Jarzmik)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 5/9] ARM: dts: provide DMA config to pxamci
Date: Wed, 11 Dec 2013 09:19:33 +0100 [thread overview]
Message-ID: <87a9g77qay.fsf@free.fr> (raw)
In-Reply-To: <52A587A0.1050503@gmail.com> (Daniel Mack's message of "Mon, 09 Dec 2013 10:04:32 +0100")
Daniel Mack <zonque@gmail•com> writes:
> In particular, the pxa camera driver is something Robert (cc) wanted to
> have a look at. Robert, any updates on this?
Oh yes, sorry, it's been monthes, I've been very busy.
This is my last status :
- my current patch is in (1)
- this patch doesn't work yet
- if my memory serves me well, I have reached the conclusion that dmaengine
pxa-mpp driver doesn't allow pxa_camera to work properly in the current
state. This is a long time since I checked, so take the following with
caution until I have checked again.
This assertion is based on this required behaviour :
- video buffers are queued, let's say 5
=> 5 dma are "prepared"
- video buffers are submitted
=> 5 dma xfers are submitted
- the userspace polls for each finished frame (ie. dma xfer termination), and
on the third one, resubmits the 2 finished frames
=> scatter-gathers should mot be recomputed, just xfer should be
resubmitted, with cache sync operations and first/last descriptors chaining
- the pxa_camera driver needs a way to know if a dma channel is still running,
for missed chaining transfers, because if a channel stopped, the dma xfers
should not be submitted until IRQ "begin of frame" is encoutered. I didn't
find a way for that.
Now, I will retry this weekend, but if I remember correctly the issues I had
were :
- a transfer cannot be resubmitted, it has to be freed and recreated
- if it is resubmitted, the completion is not signaled by the tasklet
Cheers.
--
Robert
(1)
commit 4741ba6 (pxa_camera_dmaengine, backup/pxa_camera_dmaengine)
Author: Robert Jarzmik <robert.jarzmik@free•fr>
Date: Sat Aug 24 21:13:38 2013 +0200
WIP: pxa_camera dmaengine conversion
Only slightly tested, without much success.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free•fr>
diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c
index d4df305..903ea03 100644
--- a/drivers/media/platform/soc_camera/pxa_camera.c
+++ b/drivers/media/platform/soc_camera/pxa_camera.c
@@ -9,7 +9,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#define DEBUG 1
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -28,6 +28,9 @@
#include <linux/clk.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/mmp-pdma.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
@@ -37,7 +40,6 @@
#include <linux/videodev2.h>
-#include <mach/dma.h>
#include <linux/platform_data/camera-pxa.h>
#define PXA_CAM_VERSION "0.0.6"
@@ -174,21 +176,13 @@ enum pxa_camera_active_dma {
DMA_V = 0x4,
};
-/* descriptor needed for the PXA DMA engine */
-struct pxa_cam_dma {
- dma_addr_t sg_dma;
- struct pxa_dma_desc *sg_cpu;
- size_t sg_size;
- int sglen;
-};
-
/* buffer for one video frame */
struct pxa_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
enum v4l2_mbus_pixelcode code;
/* our descriptor lists for Y, U and V channels */
- struct pxa_cam_dma dmas[3];
+ struct dma_async_tx_descriptor *descs[3];
int inwork;
enum pxa_camera_active_dma active_dma;
};
@@ -206,7 +200,7 @@ struct pxa_camera_dev {
void __iomem *base;
int channels;
- unsigned int dma_chans[3];
+ struct dma_chan *dma_chans[3];
struct pxacamera_platform_data *pdata;
struct resource *res;
@@ -221,7 +215,6 @@ struct pxa_camera_dev {
spinlock_t lock;
struct pxa_buffer *active;
- struct pxa_dma_desc *sg_tail[3];
u32 save_cicr[5];
};
@@ -273,40 +266,70 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
videobuf_waiton(vq, &buf->vb, 0, 0);
videobuf_dma_unmap(vq->dev, dma);
videobuf_dma_free(dma);
-
- for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) {
- if (buf->dmas[i].sg_cpu)
- dma_free_coherent(ici->v4l2_dev.dev,
- buf->dmas[i].sg_size,
- buf->dmas[i].sg_cpu,
- buf->dmas[i].sg_dma);
- buf->dmas[i].sg_cpu = NULL;
- }
+ /* FIXME: free buf->descs[0..2] */
buf->vb.state = VIDEOBUF_NEEDS_INIT;
+
+ dev_dbg(icd->parent, "%s end (vb=0x%p) 0x%08lx %d\n", __func__,
+ &buf->vb, buf->vb.baddr, buf->vb.bsize);
}
-static int calculate_dma_sglen(struct scatterlist *sglist, int sglen,
- int sg_first_ofs, int size)
+static struct scatterlist *videobuf_sg_splice(struct scatterlist *sglist,
+ int sglen, int offset, int size,
+ int *new_sg_len)
{
- int i, offset, dma_len, xfer_len;
- struct scatterlist *sg;
+ struct scatterlist *sg0, *sg;
+ int nfirst, i, dma_len, xfer_len;
- offset = sg_first_ofs;
- for_each_sg(sglist, sg, sglen, i) {
+ sg0 = kmalloc(sizeof(struct scatterlist) * sglen, GFP_KERNEL);
+ if (!sg0)
+ return NULL;
+ for_each_sg(sglist, sg, sglen, nfirst) {
dma_len = sg_dma_len(sg);
-
+ if (offset < dma_len)
+ break;
/* PXA27x Developer's Manual 27.4.4.1: round up to 8 bytes */
- xfer_len = roundup(min(dma_len - offset, size), 8);
-
- size = max(0, size - xfer_len);
- offset = 0;
- if (size == 0)
+ xfer_len = roundup(min(dma_len - offset, offset), 8);
+ offset = max(0, offset - xfer_len);
+ }
+ BUG_ON(sg_is_last(&sglist[nfirst]));
+ for_each_sg(&sglist[nfirst], sg, sglen - nfirst, i) {
+ sg0[i] = sglist[nfirst];
+ sg0[i].offset = offset;
+ sg_dma_len(&sg0[i]) -= offset;
+ if (size <= sg_dma_len(sg))
break;
+ offset = 0;
+ size -= roundup(sg_dma_len(sg), 8);
+ }
+ if (size) {
+ sg_dma_len(&sg0[i]) = size;
+ *new_sg_len = i + 1;
+ } else {
+ *new_sg_len = i;
}
- BUG_ON(size != 0);
- return i + 1;
+ return sg0;
+}
+static void pxa_camera_dma_irq(struct pxa_camera_dev *pcdev,
+ enum pxa_camera_active_dma act_dma);
+
+static void pxa_camera_dma_irq_y(void *data)
+{
+ struct pxa_camera_dev *pcdev = data;
+ pxa_camera_dma_irq(pcdev, DMA_Y);
+}
+
+static void pxa_camera_dma_irq_u(void *data)
+{
+ struct pxa_camera_dev *pcdev = data;
+ pxa_camera_dma_irq(pcdev, DMA_U);
+}
+
+static void pxa_camera_dma_irq_v(void *data)
+{
+ struct pxa_camera_dev *pcdev = data;
+ pxa_camera_dma_irq(pcdev, DMA_V);
}
/**
@@ -317,91 +340,68 @@ static int calculate_dma_sglen(struct scatterlist *sglist, int sglen,
* @channel: dma channel (0 => 'Y', 1 => 'U', 2 => 'V')
* @cibr: camera Receive Buffer Register
* @size: bytes to transfer
- * @sg_first: first element of sg_list
- * @sg_first_ofs: offset in first element of sg_list
+ * @offset: offset in videobuffer of the first byte to transfer
*
* Prepares the pxa dma descriptors to transfer one camera channel.
- * Beware sg_first and sg_first_ofs are both input and output parameters.
*
- * Returns 0 or -ENOMEM if no coherent memory is available
+ * Returns 0 if success or -ENOMEM if no memory is available
*/
static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
struct pxa_buffer *buf,
struct videobuf_dmabuf *dma, int channel,
- int cibr, int size,
- struct scatterlist **sg_first, int *sg_first_ofs)
+ int cibr, int size, int offset)
{
- struct pxa_cam_dma *pxa_dma = &buf->dmas[channel];
- struct device *dev = pcdev->soc_host.v4l2_dev.dev;
- struct scatterlist *sg;
- int i, offset, sglen;
- int dma_len = 0, xfer_len = 0;
+ struct dma_chan *dma_chan = pcdev->dma_chans[channel];
+ struct scatterlist *sg = NULL;
+ int ret, sglen;
+ struct dma_slave_config config;
+ struct dma_async_tx_descriptor *tx;
- if (pxa_dma->sg_cpu)
- dma_free_coherent(dev, pxa_dma->sg_size,
- pxa_dma->sg_cpu, pxa_dma->sg_dma);
+ dmaengine_terminate_all(dma_chan);
- sglen = calculate_dma_sglen(*sg_first, dma->sglen,
- *sg_first_ofs, size);
-
- pxa_dma->sg_size = (sglen + 1) * sizeof(struct pxa_dma_desc);
- pxa_dma->sg_cpu = dma_alloc_coherent(dev, pxa_dma->sg_size,
- &pxa_dma->sg_dma, GFP_KERNEL);
- if (!pxa_dma->sg_cpu)
+ sg = videobuf_sg_splice(dma->sglist, dma->sglen, offset, size, &sglen);
+ if (!sg)
return -ENOMEM;
- pxa_dma->sglen = sglen;
- offset = *sg_first_ofs;
-
- dev_dbg(dev, "DMA: sg_first=%p, sglen=%d, ofs=%d, dma.desc=%x\n",
- *sg_first, sglen, *sg_first_ofs, pxa_dma->sg_dma);
-
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; /* FIXME? */
+ config.src_maxburst = 8;
+ config.src_addr = pcdev->res->start + cibr;
+ config.direction = DMA_DEV_TO_MEM;
- for_each_sg(*sg_first, sg, sglen, i) {
- dma_len = sg_dma_len(sg);
-
- /* PXA27x Developer's Manual 27.4.4.1: round up to 8 bytes */
- xfer_len = roundup(min(dma_len - offset, size), 8);
-
- size = max(0, size - xfer_len);
-
- pxa_dma->sg_cpu[i].dsadr = pcdev->res->start + cibr;
- pxa_dma->sg_cpu[i].dtadr = sg_dma_address(sg) + offset;
- pxa_dma->sg_cpu[i].dcmd =
- DCMD_FLOWSRC | DCMD_BURST8 | DCMD_INCTRGADDR | xfer_len;
-#ifdef DEBUG
- if (!i)
- pxa_dma->sg_cpu[i].dcmd |= DCMD_STARTIRQEN;
-#endif
- pxa_dma->sg_cpu[i].ddadr =
- pxa_dma->sg_dma + (i + 1) * sizeof(struct pxa_dma_desc);
-
- dev_vdbg(dev, "DMA: desc.%08x->@phys=0x%08x, len=%d\n",
- pxa_dma->sg_dma + i * sizeof(struct pxa_dma_desc),
- sg_dma_address(sg) + offset, xfer_len);
- offset = 0;
-
- if (size == 0)
- break;
+ ret = dmaengine_slave_config(dma_chan, &config);
+ if (ret < 0) {
+ printk("%s(): dma slave config failed: %d\n", __func__, ret);
+ return ret;
}
- pxa_dma->sg_cpu[sglen].ddadr = DDADR_STOP;
- pxa_dma->sg_cpu[sglen].dcmd = DCMD_FLOWSRC | DCMD_BURST8 | DCMD_ENDIRQEN;
+ tx = dmaengine_prep_slave_sg(dma_chan, sg, sglen,
+ config.direction,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx) {
+ printk("%s(): prep_slave_sg() failed\n", __func__);
+ goto fail;
+ }
- /*
- * Handle 1 special case :
- * - in 3 planes (YUV422P format), we might finish with xfer_len equal
- * to dma_len (end on PAGE boundary). In this case, the sg element
- * for next plane should be the next after the last used to store the
- * last scatter gather RAM page
- */
- if (xfer_len >= dma_len) {
- *sg_first_ofs = xfer_len - dma_len;
- *sg_first = sg_next(sg);
- } else {
- *sg_first_ofs = xfer_len;
- *sg_first = sg;
+ tx->callback_param = pcdev;
+ switch (channel) {
+ case 0:
+ tx->callback = pxa_camera_dma_irq_y;
+ break;
+ case 1:
+ tx->callback = pxa_camera_dma_irq_u;
+ break;
+ case 2:
+ tx->callback = pxa_camera_dma_irq_v;
+ break;
}
+fail:
+ kfree(sg);
+ buf->descs[channel] = tx;
+
+ dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+ "%s (vb=0x%p) dma_tx=%p\n",
+ __func__, &buf->vb, tx);
return 0;
}
@@ -470,11 +470,10 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
goto out;
}
- if (vb->state == VIDEOBUF_NEEDS_INIT) {
+ //if (vb->state == VIDEOBUF_NEEDS_INIT) {
+ if (vb->state != VIDEOBUF_PREPARED) {
int size = vb->size;
- int next_ofs = 0;
struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
- struct scatterlist *sg;
ret = videobuf_iolock(vq, vb, NULL);
if (ret)
@@ -487,11 +486,8 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
size_y = size;
}
- sg = dma->sglist;
-
/* init DMA for Y channel */
- ret = pxa_init_dma_channel(pcdev, buf, dma, 0, CIBR0, size_y,
- &sg, &next_ofs);
+ ret = pxa_init_dma_channel(pcdev, buf, dma, 0, CIBR0, size_y, 0);
if (ret) {
dev_err(dev, "DMA initialization for Y/RGB failed\n");
goto fail;
@@ -500,7 +496,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
/* init DMA for U channel */
if (size_u)
ret = pxa_init_dma_channel(pcdev, buf, dma, 1, CIBR1,
- size_u, &sg, &next_ofs);
+ size_u, size_y);
if (ret) {
dev_err(dev, "DMA initialization for U failed\n");
goto fail_u;
@@ -509,7 +505,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
/* init DMA for V channel */
if (size_v)
ret = pxa_init_dma_channel(pcdev, buf, dma, 2, CIBR2,
- size_v, &sg, &next_ofs);
+ size_v, size_y + size_u);
if (ret) {
dev_err(dev, "DMA initialization for V failed\n");
goto fail_v;
@@ -524,11 +520,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
return 0;
fail_v:
- dma_free_coherent(dev, buf->dmas[1].sg_size,
- buf->dmas[1].sg_cpu, buf->dmas[1].sg_dma);
fail_u:
- dma_free_coherent(dev, buf->dmas[0].sg_size,
- buf->dmas[0].sg_cpu, buf->dmas[0].sg_dma);
fail:
free_buffer(vq, buf);
out:
@@ -552,10 +544,8 @@ static void pxa_dma_start_channels(struct pxa_camera_dev *pcdev)
for (i = 0; i < pcdev->channels; i++) {
dev_dbg(pcdev->soc_host.v4l2_dev.dev,
- "%s (channel=%d) ddadr=%08x\n", __func__,
- i, active->dmas[i].sg_dma);
- DDADR(pcdev->dma_chans[i]) = active->dmas[i].sg_dma;
- DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
+ "%s (channel=%d)\n", __func__, i);
+ dma_async_issue_pending(pcdev->dma_chans[i]);
}
}
@@ -566,7 +556,7 @@ static void pxa_dma_stop_channels(struct pxa_camera_dev *pcdev)
for (i = 0; i < pcdev->channels; i++) {
dev_dbg(pcdev->soc_host.v4l2_dev.dev,
"%s (channel=%d)\n", __func__, i);
- DCSR(pcdev->dma_chans[i]) = 0;
+ dmaengine_terminate_all(pcdev->dma_chans[i]);
}
}
@@ -574,18 +564,12 @@ static void pxa_dma_add_tail_buf(struct pxa_camera_dev *pcdev,
struct pxa_buffer *buf)
{
int i;
- struct pxa_dma_desc *buf_last_desc;
for (i = 0; i < pcdev->channels; i++) {
- buf_last_desc = buf->dmas[i].sg_cpu + buf->dmas[i].sglen;
- buf_last_desc->ddadr = DDADR_STOP;
-
- if (pcdev->sg_tail[i])
- /* Link the new buffer to the old tail */
- pcdev->sg_tail[i]->ddadr = buf->dmas[i].sg_dma;
-
- /* Update the channel tail */
- pcdev->sg_tail[i] = buf_last_desc;
+ dmaengine_submit(buf->descs[i]);
+ dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+ "%s (channel=%d) : submit vb=%p cookie=%d\n",
+ __func__, i, buf, buf->descs[i]->cookie);
}
}
@@ -676,8 +660,6 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
struct videobuf_buffer *vb,
struct pxa_buffer *buf)
{
- int i;
-
/* _init is used to debug races, see comment in pxa_camera_reqbufs() */
list_del_init(&vb->queue);
vb->state = VIDEOBUF_DONE;
@@ -689,8 +671,6 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
if (list_empty(&pcdev->capture)) {
pxa_camera_stop_capture(pcdev);
- for (i = 0; i < pcdev->channels; i++)
- pcdev->sg_tail[i] = NULL;
return;
}
@@ -716,48 +696,33 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
*/
static void pxa_camera_check_link_miss(struct pxa_camera_dev *pcdev)
{
- int i, is_dma_stopped = 1;
+ /* FIXME: ask dmaengine if channel is still running */
+ int is_dma_stopped = 1;
- for (i = 0; i < pcdev->channels; i++)
- if (DDADR(pcdev->dma_chans[i]) != DDADR_STOP)
- is_dma_stopped = 0;
dev_dbg(pcdev->soc_host.v4l2_dev.dev,
- "%s : top queued buffer=%p, dma_stopped=%d\n",
- __func__, pcdev->active, is_dma_stopped);
+ "%s : top queued buffer=%p\n", __func__, pcdev->active);
+ if (pcdev->active)
+ pxa_dma_start_channels(pcdev);
if (pcdev->active && is_dma_stopped)
pxa_camera_start_capture(pcdev);
}
-static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
+static void pxa_camera_dma_irq(struct pxa_camera_dev *pcdev,
enum pxa_camera_active_dma act_dma)
{
struct device *dev = pcdev->soc_host.v4l2_dev.dev;
struct pxa_buffer *buf;
unsigned long flags;
- u32 status, camera_status, overrun;
+ u32 camera_status, overrun;
struct videobuf_buffer *vb;
spin_lock_irqsave(&pcdev->lock, flags);
- status = DCSR(channel);
- DCSR(channel) = status;
-
camera_status = __raw_readl(pcdev->base + CISR);
overrun = CISR_IFO_0;
if (pcdev->channels == 3)
overrun |= CISR_IFO_1 | CISR_IFO_2;
- if (status & DCSR_BUSERR) {
- dev_err(dev, "DMA Bus Error IRQ!\n");
- goto out;
- }
-
- if (!(status & (DCSR_ENDINTR | DCSR_STARTINTR))) {
- dev_err(dev, "Unknown DMA IRQ source, status: 0x%08x\n",
- status);
- goto out;
- }
-
/*
* pcdev->active should not be NULL in DMA irq handler.
*
@@ -777,52 +742,28 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
buf = container_of(vb, struct pxa_buffer, vb);
WARN_ON(buf->inwork || list_empty(&vb->queue));
- dev_dbg(dev, "%s channel=%d %s%s(vb=0x%p) dma.desc=%x\n",
- __func__, channel, status & DCSR_STARTINTR ? "SOF " : "",
- status & DCSR_ENDINTR ? "EOF " : "", vb, DDADR(channel));
-
- if (status & DCSR_ENDINTR) {
- /*
- * It's normal if the last frame creates an overrun, as there
- * are no more DMA descriptors to fetch from QCI fifos
- */
- if (camera_status & overrun &&
- !list_is_last(pcdev->capture.next, &pcdev->capture)) {
- dev_dbg(dev, "FIFO overrun! CISR: %x\n",
- camera_status);
- pxa_camera_stop_capture(pcdev);
- pxa_camera_start_capture(pcdev);
- goto out;
- }
- buf->active_dma &= ~act_dma;
- if (!buf->active_dma) {
- pxa_camera_wakeup(pcdev, vb, buf);
- pxa_camera_check_link_miss(pcdev);
- }
+ /*
+ * It's normal if the last frame creates an overrun, as there
+ * are no more DMA descriptors to fetch from QCI fifos
+ */
+ if (camera_status & overrun &&
+ !list_is_last(pcdev->capture.next, &pcdev->capture)) {
+ dev_dbg(dev, "FIFO overrun! CISR: %x\n",
+ camera_status);
+ pxa_camera_stop_capture(pcdev);
+ pxa_camera_start_capture(pcdev);
+ goto out;
+ }
+ buf->active_dma &= ~act_dma;
+ if (!buf->active_dma) {
+ pxa_camera_wakeup(pcdev, vb, buf);
+ pxa_camera_check_link_miss(pcdev);
}
out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
-static void pxa_camera_dma_irq_y(int channel, void *data)
-{
- struct pxa_camera_dev *pcdev = data;
- pxa_camera_dma_irq(channel, pcdev, DMA_Y);
-}
-
-static void pxa_camera_dma_irq_u(int channel, void *data)
-{
- struct pxa_camera_dev *pcdev = data;
- pxa_camera_dma_irq(channel, pcdev, DMA_U);
-}
-
-static void pxa_camera_dma_irq_v(int channel, void *data)
-{
- struct pxa_camera_dev *pcdev = data;
- pxa_camera_dma_irq(channel, pcdev, DMA_V);
-}
-
static struct videobuf_queue_ops pxa_videobuf_ops = {
.buf_setup = pxa_videobuf_setup,
.buf_prepare = pxa_videobuf_prepare,
@@ -992,10 +933,7 @@ static void pxa_camera_clock_stop(struct soc_camera_host *ici)
__raw_writel(0x3ff, pcdev->base + CICR0);
/* Stop DMA engine */
- DCSR(pcdev->dma_chans[0]) = 0;
- DCSR(pcdev->dma_chans[1]) = 0;
- DCSR(pcdev->dma_chans[2]) = 0;
-
+ pxa_dma_stop_channels(pcdev);
pxa_camera_deactivate(pcdev);
}
@@ -1608,10 +1546,6 @@ static int pxa_camera_resume(struct device *dev)
struct pxa_camera_dev *pcdev = ici->priv;
int i = 0, ret = 0;
- DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
-
__raw_writel(pcdev->save_cicr[i++] & ~CICR0_ENB, pcdev->base + CICR0);
__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR1);
__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR2);
@@ -1655,6 +1589,8 @@ static int pxa_camera_probe(struct platform_device *pdev)
struct pxa_camera_dev *pcdev;
struct resource *res;
void __iomem *base;
+ dma_cap_mask_t mask;
+ unsigned int drcmr;
int irq;
int err = 0;
@@ -1717,36 +1653,35 @@ static int pxa_camera_probe(struct platform_device *pdev)
pcdev->base = base;
/* request dma */
- err = pxa_request_dma("CI_Y", DMA_PRIO_HIGH,
- pxa_camera_dma_irq_y, pcdev);
- if (err < 0) {
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ drcmr = 68;
+ pcdev->dma_chans[0] =
+ dma_request_slave_channel_compat(mask, mmp_pdma_filter_fn,
+ &drcmr, &pdev->dev, "CI_Y");
+ if (!pcdev->dma_chans[0]) {
dev_err(&pdev->dev, "Can't request DMA for Y\n");
- return err;
+ return -ENODEV;
}
- pcdev->dma_chans[0] = err;
- dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]);
- err = pxa_request_dma("CI_U", DMA_PRIO_HIGH,
- pxa_camera_dma_irq_u, pcdev);
- if (err < 0) {
- dev_err(&pdev->dev, "Can't request DMA for U\n");
+ drcmr = 69;
+ pcdev->dma_chans[1] =
+ dma_request_slave_channel_compat(mask, mmp_pdma_filter_fn,
+ &drcmr, &pdev->dev, "CI_U");
+ if (!pcdev->dma_chans[1]) {
+ dev_err(&pdev->dev, "Can't request DMA for Y\n");
goto exit_free_dma_y;
}
- pcdev->dma_chans[1] = err;
- dev_dbg(&pdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]);
- err = pxa_request_dma("CI_V", DMA_PRIO_HIGH,
- pxa_camera_dma_irq_v, pcdev);
- if (err < 0) {
+ drcmr = 70;
+ pcdev->dma_chans[2] =
+ dma_request_slave_channel_compat(mask, mmp_pdma_filter_fn,
+ &drcmr, &pdev->dev, "CI_V");
+ if (!pcdev->dma_chans[2]) {
dev_err(&pdev->dev, "Can't request DMA for V\n");
goto exit_free_dma_u;
}
- pcdev->dma_chans[2] = err;
- dev_dbg(&pdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
-
- DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
/* request irq */
err = devm_request_irq(&pdev->dev, pcdev->irq, pxa_camera_irq, 0,
@@ -1769,11 +1704,11 @@ static int pxa_camera_probe(struct platform_device *pdev)
return 0;
exit_free_dma:
- pxa_free_dma(pcdev->dma_chans[2]);
+ dma_release_channel(pcdev->dma_chans[2]);
exit_free_dma_u:
- pxa_free_dma(pcdev->dma_chans[1]);
+ dma_release_channel(pcdev->dma_chans[1]);
exit_free_dma_y:
- pxa_free_dma(pcdev->dma_chans[0]);
+ dma_release_channel(pcdev->dma_chans[0]);
return err;
}
@@ -1783,9 +1718,9 @@ static int pxa_camera_remove(struct platform_device *pdev)
struct pxa_camera_dev *pcdev = container_of(soc_host,
struct pxa_camera_dev, soc_host);
- pxa_free_dma(pcdev->dma_chans[0]);
- pxa_free_dma(pcdev->dma_chans[1]);
- pxa_free_dma(pcdev->dma_chans[2]);
+ dma_release_channel(pcdev->dma_chans[0]);
+ dma_release_channel(pcdev->dma_chans[1]);
+ dma_release_channel(pcdev->dma_chans[2]);
soc_camera_host_unregister(soc_host);
----------
next prev parent reply other threads:[~2013-12-11 8:19 UTC|newest]
Thread overview: 249+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-01 6:26 [PATCH 00/11] ARM: support for ICP DAS LP-8x4x Sergei Ianovich
2013-12-01 6:26 ` [PATCH 01/11] resolve PXA<->8250 serial device address conflict Sergei Ianovich
2013-12-02 9:02 ` Heikki Krogerus
2013-12-02 9:23 ` Sergei Ianovich
2013-12-02 9:49 ` Heikki Krogerus
2013-12-02 10:26 ` Sergei Ianovich
2013-12-02 14:10 ` Heikki Krogerus
2013-12-05 4:12 ` Greg Kroah-Hartman
2013-12-05 4:31 ` Sergei Ianovich
2013-12-05 4:35 ` Greg Kroah-Hartman
2013-12-05 4:36 ` Sergei Ianovich
2013-12-05 23:28 ` [PATCH] serial: rewrite pxa2xx-uart to use 8250_core Sergei Ianovich
2013-12-06 0:02 ` Greg Kroah-Hartman
2013-12-06 0:17 ` Russell King - ARM Linux
2013-12-06 9:28 ` Sergei Ianovich
2013-12-06 9:53 ` James Cameron
2013-12-06 10:34 ` Sergei Ianovich
2013-12-06 11:05 ` James Cameron
2013-12-06 0:38 ` James Cameron
2013-12-06 2:55 ` James Cameron
2013-12-06 2:42 ` James Cameron
2013-12-06 9:16 ` Sergei Ianovich
2013-12-06 9:09 ` [PATCH v2] " Sergei Ianovich
2013-12-06 9:28 ` James Cameron
2013-12-09 8:38 ` Heikki Krogerus
2013-12-09 8:44 ` Sascha Hauer
2013-12-09 11:38 ` [PATCH v3] " Sergei Ianovich
2014-01-28 14:14 ` [PATCH 01/11] resolve PXA<->8250 serial device address conflict Pavel Machek
2014-01-28 14:20 ` Sergei Ianovich
2013-12-01 6:26 ` [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x Sergei Ianovich
2013-12-06 0:40 ` Arnd Bergmann
2013-12-06 16:38 ` Sergei Ianovich
2013-12-06 17:14 ` Arnd Bergmann
2013-12-10 12:33 ` Linus Walleij
2013-12-10 20:20 ` Sergei Ianovich
2013-12-10 21:57 ` Arnd Bergmann
2013-12-11 4:30 ` Sergei Ianovich
2013-12-11 5:11 ` Arnd Bergmann
2013-12-11 5:41 ` Sergei Ianovich
2013-12-11 14:53 ` Arnd Bergmann
2013-12-06 16:48 ` [PATCH v2 " Sergei Ianovich
2013-12-08 2:21 ` Arnd Bergmann
2013-12-08 7:05 ` Sergei Ianovich
2013-12-09 0:54 ` Arnd Bergmann
2013-12-08 22:53 ` [PATCH 0/9] ARM: support for ICP DAS LP-8x4x (with dts) Sergei Ianovich
2013-12-08 22:53 ` [PATCH 1/9] ARM: dts: pxa2xx fix compatible strings Sergei Ianovich
2013-12-08 22:53 ` [PATCH 2/9] ARM: dts: fix pxa27x-gpio interrupts Sergei Ianovich
2013-12-08 22:53 ` [PATCH 3/9] ARM: fix ohci-pxa27x build error with OF enabled Sergei Ianovich
2013-12-09 14:26 ` Steve Cotton
2013-12-09 14:42 ` Sergei Ianovich
2013-12-08 22:53 ` [PATCH 4/9] ARM: pxa: remove unused variable Sergei Ianovich
2013-12-09 8:56 ` Daniel Mack
2013-12-09 9:42 ` Sergei Ianovich
2013-12-09 9:49 ` Daniel Mack
2013-12-08 22:53 ` [PATCH 5/9] ARM: dts: provide DMA config to pxamci Sergei Ianovich
2013-12-09 1:33 ` Arnd Bergmann
2013-12-09 9:04 ` Daniel Mack
2013-12-09 9:34 ` Sergei Ianovich
2013-12-09 9:53 ` Sergei Ianovich
2013-12-09 10:21 ` Daniel Mack
2013-12-09 12:09 ` Sergei Ianovich
2013-12-10 0:25 ` Arnd Bergmann
2013-12-10 4:25 ` Sergei Ianovich
2013-12-09 13:16 ` Sergei Ianovich
2013-12-11 8:19 ` Robert Jarzmik [this message]
2013-12-08 22:53 ` [PATCH 6/9] ARM: dts: pxa3xx: move declaration to header Sergei Ianovich
2013-12-09 1:13 ` Arnd Bergmann
2013-12-08 22:53 ` [PATCH 7/9] ARM: dts: pxa27x: skip static platform devices Sergei Ianovich
2013-12-08 22:53 ` [PATCH 8/9] ARM: dts: pxa27x: device tree irq init Sergei Ianovich
2013-12-08 22:53 ` [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x Sergei Ianovich
2013-12-09 1:47 ` Arnd Bergmann
2013-12-09 15:16 ` Sergei Ianovich
2013-12-09 15:55 ` Sergei Ianovich
2013-12-09 16:39 ` Arnd Bergmann
2013-12-09 16:25 ` Arnd Bergmann
2013-12-09 1:51 ` [PATCH 0/9] ARM: support for ICP DAS LP-8x4x (with dts) Arnd Bergmann
2013-12-09 18:44 ` Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 00/16] " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 01/16] ARM: dts: pxa2xx fix compatible strings Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 02/16] ARM: dts: fix pxa27x-gpio interrupts Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci Sergei Ianovich
2013-12-14 19:06 ` Arnd Bergmann
2013-12-14 19:34 ` Sergei Ianovich
2013-12-14 23:39 ` Arnd Bergmann
2013-12-16 9:58 ` Daniel Mack
2013-12-16 11:47 ` Sergei Ianovich
2013-12-16 11:58 ` Lars-Peter Clausen
2013-12-16 12:03 ` Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 04/16] ARM: dts: pxa3xx: move declaration to header Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 05/16] ARM: dts: pxa27x: irq init using device tree Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 06/16] ARM: pxa27x: device tree support ICP DAS LP-8x4x Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 07/16] rtc: support DS1302 RTC on " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 08/16] mtd: support BB SRAM " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 09/16] ARM: pxa: support ICP DAS LP-8x4x FPGA irq Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 10/16] serial: support for 16550A serial ports on LP-8x4x Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 11/16] misc: support for LP-8x4x custom parallel bus Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 12/16] misc: support for serial slots in LP-8x4x Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 13/16] misc: support for parallel " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 14/16] misc: support for I-8041 " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 15/16] misc: support for I-8042 " Sergei Ianovich
2013-12-13 2:27 ` [PATCH v2 16/16] misc: support for I-8024 " Sergei Ianovich
2013-12-14 20:59 ` Arnd Bergmann
2013-12-14 23:03 ` Sergei Ianovich
2013-12-13 2:33 ` [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts) Sergei Ianovich
2013-12-14 21:03 ` Arnd Bergmann
2013-12-14 21:55 ` Sergei Ianovich
2013-12-15 0:53 ` Arnd Bergmann
2013-12-15 2:12 ` Sergei Ianovich
2013-12-15 2:55 ` Arnd Bergmann
2013-12-16 13:01 ` Sergei Ianovich
2013-12-16 17:56 ` Arnd Bergmann
2013-12-16 20:38 ` Sergei Ianovich
2013-12-18 20:50 ` Arnd Bergmann
2013-12-18 20:56 ` Sergei Ianovich
2013-12-18 21:10 ` Arnd Bergmann
2013-12-18 21:20 ` Sergei Ianovich
2013-12-19 5:30 ` Arnd Bergmann
2014-01-09 23:12 ` Sergei Ianovich
2014-01-20 16:08 ` Sergei Ianovich
2014-01-20 16:20 ` Daniel Mack
2014-01-20 16:52 ` Sergei Ianovich
2014-01-20 16:58 ` Daniel Mack
2013-12-17 19:37 ` [PATCH v3 00/21] " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core Sergei Ianovich
2013-12-18 23:55 ` Greg Kroah-Hartman
2013-12-19 8:51 ` Heikki Krogerus
2013-12-19 9:35 ` Sergei Ianovich
2013-12-19 10:01 ` Sergei Ianovich
2013-12-19 11:05 ` Heikki Krogerus
2013-12-17 19:37 ` [PATCH v3 02/21] ARM: dts: pxa2xx fix compatible strings Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 03/21] ARM: dts: fix pxa27x-gpio interrupts Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 04/21] ARM: dts: pxa3xx: move declaration to header Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 05/21] ARM: dts: pxa27x: irq init using device tree Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 06/21] ARM: dts: provide DMA config to pxamci on PXA27x Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 07/21] ARM: dts: parse DMA config in pxamci Sergei Ianovich
2013-12-19 0:50 ` Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 08/21] ARM: pxa27x: device tree support ICP DAS LP-8x4x Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 09/21] rtc: support DS1302 RTC on " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 10/21] mtd: support BB SRAM " Sergei Ianovich
2014-04-16 5:04 ` Brian Norris
2014-04-16 5:21 ` Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 11/21] ARM: pxa: support ICP DAS LP-8x4x FPGA irq Sergei Ianovich
2014-01-02 12:32 ` Linus Walleij
2014-01-08 19:01 ` Sergei Ianovich
2014-01-15 7:39 ` Linus Walleij
2014-01-15 13:17 ` Sergei Ianovich
2014-01-09 23:07 ` [PATCH v3.1 " Sergei Ianovich
2014-01-15 7:46 ` Linus Walleij
2014-01-15 13:12 ` [PATCH v3.2 " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 12/21] serial: support for 16550A serial ports on LP-8x4x Sergei Ianovich
2013-12-19 11:18 ` Heikki Krogerus
2013-12-17 19:37 ` [PATCH v3 13/21] misc: support for LP-8x4x custom parallel bus Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 14/21] misc: support for LP-8x4x rotary switch Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 15/21] misc: support for LP-8x4x DIP switch Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 16/21] misc: support for writing to LP-8x4x EEPROM Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 17/21] misc: support for serial slots in LP-8x4x Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 18/21] misc: support for parallel " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 19/21] misc: support for I-8041 " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 20/21] misc: support for I-8042 " Sergei Ianovich
2013-12-17 19:37 ` [PATCH v3 21/21] misc: support for I-8024 " Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts) Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 01/21] serial: rewrite pxa2xx-uart to use 8250_core Sergei Ianovich
2015-01-19 18:08 ` Rob Herring
2014-04-16 17:13 ` [PATCH v4 02/21] ARM: dts: pxa2xx fix compatible strings Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 03/21] ARM: dts: fix pxa27x-gpio interrupts Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 04/21] ARM: dts: pxa3xx: move declaration to header Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 05/21] ARM: dts: pxa27x: irq init using device tree Sergei Ianovich
2014-04-16 17:13 ` [PATCH v4 06/21] ARM: dts: provide DMA config to pxamci on PXA27x Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 07/21] ARM: dts: parse DMA config in pxamci Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 08/21] ARM: pxa27x: device tree support ICP DAS LP-8x4x Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 09/21] rtc: support DS1302 RTC on " Sergei Ianovich
2015-06-08 12:07 ` [v4,09/21] " Alexandre Belloni
2015-06-08 12:12 ` Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 10/21] mtd: support BB SRAM " Sergei Ianovich
2014-04-30 17:21 ` Brian Norris
2014-04-30 17:35 ` ООО "ЭлектроПлюс"
2014-04-16 17:17 ` [PATCH v4 11/21] ARM: pxa: support ICP DAS LP-8x4x FPGA irq Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x Sergei Ianovich
2014-04-16 18:35 ` One Thousand Gnomes
2014-04-16 19:01 ` Sergei Ianovich
2014-04-16 20:00 ` One Thousand Gnomes
2014-04-16 20:32 ` Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 13/21] misc: support for LP-8x4x custom parallel bus Sergei Ianovich
2014-04-16 18:41 ` One Thousand Gnomes
2014-04-16 18:42 ` Arnd Bergmann
2014-04-16 20:29 ` One Thousand Gnomes
2014-04-16 19:53 ` Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 14/21] misc: support for LP-8x4x rotary switch Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 15/21] misc: support for LP-8x4x DIP switch Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 16/21] misc: support for writing to LP-8x4x EEPROM Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 17/21] misc: support for serial slots in LP-8x4x Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 18/21] misc: support for parallel " Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 19/21] misc: support for I-8041 " Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 20/21] misc: support for I-8042 " Sergei Ianovich
2014-04-16 17:17 ` [PATCH v4 21/21] misc: support for I-8024 " Sergei Ianovich
2014-04-16 18:39 ` One Thousand Gnomes
2014-04-16 19:28 ` Sergei Ianovich
2014-04-16 19:56 ` One Thousand Gnomes
2014-04-16 20:06 ` Sergei Ianovich
2014-04-16 17:39 ` [PATCH v4 00/21] ARM: support for ICP DAS LP-8x4x (with dts) Daniel Mack
2014-04-16 20:59 ` Sergei Ianovich
2014-04-17 10:38 ` Daniel Mack
2014-04-17 12:12 ` Sergei Ianovich
2014-04-17 12:34 ` Daniel Mack
2014-04-19 11:59 ` Arnd Bergmann
[not found] ` <1449700088-28076-1-git-send-email-ynvich@gmail.com>
2015-12-09 22:28 ` [PATCH v4 1/2] serial: rewrite pxa2xx-uart to use 8250_core Sergei Ianovich
2015-12-19 12:45 ` Robert Jarzmik
2015-12-19 13:26 ` Robert Jarzmik
2015-12-19 18:46 ` Sergei Ianovich
2015-12-19 19:31 ` Robert Jarzmik
2015-12-19 20:12 ` Sergei Ianovich
2015-12-19 23:12 ` Robert Jarzmik
2015-12-20 11:24 ` Sergei Ianovich
2015-12-22 19:27 ` Robert Jarzmik
2015-12-09 22:28 ` [PATCH v4 2/2] arm: pxa27x: support for ICP DAS LP-8x4x w/ DT Sergei Ianovich
2015-12-11 2:53 ` Rob Herring
2015-12-15 16:27 ` [PATCH v5 " Sergei Ianovich
2015-12-15 16:32 ` Arnd Bergmann
2015-12-15 16:42 ` Sergei Ianovich
2015-12-15 17:02 ` Arnd Bergmann
2015-12-15 17:24 ` Sergei Ianovich
2015-12-15 18:06 ` Robert Jarzmik
2015-12-15 18:50 ` Sergei Ianovich
2015-12-15 19:21 ` Arnd Bergmann
2015-12-15 20:01 ` Robert Jarzmik
2015-12-15 20:40 ` Arnd Bergmann
2015-12-19 12:27 ` Robert Jarzmik
2015-12-19 7:53 ` [PATCH] arm: pxa: create a unified defconfig for PXA27X-DT Sergei Ianovich
2013-12-10 12:43 ` [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x Linus Walleij
2013-12-10 12:47 ` Sergei Ianovich
2013-12-12 19:58 ` Linus Walleij
2013-12-10 12:54 ` Vasily Khoruzhick
2013-12-12 20:07 ` Linus Walleij
2013-12-01 6:26 ` [PATCH 03/11] rtc: support DS1302 RTC on " Sergei Ianovich
2013-12-01 6:26 ` [PATCH 04/11] mtd: support BB SRAM " Sergei Ianovich
2013-12-01 6:26 ` [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x Sergei Ianovich
2013-12-02 8:48 ` Heikki Krogerus
2013-12-02 11:46 ` Sergei Ianovich
2013-12-02 13:53 ` Heikki Krogerus
2013-12-02 11:30 ` Russell King - ARM Linux
2013-12-02 11:39 ` Sergei Ianovich
2013-12-02 11:52 ` Russell King - ARM Linux
2013-12-02 12:01 ` Sergei Ianovich
2013-12-01 6:26 ` [PATCH 06/11] misc: support for LP-8x4x custom parallel bus Sergei Ianovich
2013-12-01 6:26 ` [PATCH 07/11] misc: support for serial slots in LP-8x4x Sergei Ianovich
2013-12-01 6:26 ` [PATCH 08/11] misc: support for parallel " Sergei Ianovich
2013-12-01 6:26 ` [PATCH 09/11] misc: support for I-8041 " Sergei Ianovich
2013-12-01 6:26 ` [PATCH 10/11] misc: support for I-8042 " Sergei Ianovich
2013-12-01 6:26 ` [PATCH 11/11] misc: support for I-8024 " Sergei Ianovich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a9g77qay.fsf@free.fr \
--to=robert.jarzmik@free$(echo .)fr \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox