From: gregory.clement@bootlin•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [RESEND PATCH 4/4] arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
Date: Fri, 21 Sep 2018 16:15:42 +0200 [thread overview]
Message-ID: <87bm8rgcmp.fsf@bootlin.com> (raw)
In-Reply-To: <20180830081501.11569-4-miquel.raynal@bootlin.com> (Miquel Raynal's message of "Thu, 30 Aug 2018 10:15:01 +0200")
Hi Miquel,
On jeu., ao?t 30 2018, Miquel Raynal <miquel.raynal@bootlin•com> wrote:
> Add a thermal-zone node and fill in all the sensors available in a
> cp110 (only one in the thermal IP).
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin•com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> index 62842fae2571..d9b50ad0bc6c 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> @@ -6,6 +6,7 @@
> */
>
> #include <dt-bindings/interrupt-controller/mvebu-icu.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> #include "armada-common.dtsi"
>
> @@ -19,6 +20,23 @@
> * save one indentation level
> */
> CP110_NAME: CP110_NAME { };
> +
> + /*
> + * CPs only have one sensor in the thermal IC.
> + *
> + * The cooling maps are empty as there are no cooling devices.
> + */
> + thermal-zones {
> + CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
> + polling-delay-passive = <1000>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&CP110_LABEL(thermal) 0>;
> +
> + trips { };
> + cooling-maps { };
> + };
> + };
> };
>
> &CP110_NAME {
> @@ -226,6 +244,7 @@
> CP110_LABEL(thermal): thermal-sensor at 70 {
> compatible = "marvell,armada-cp110-thermal";
> reg = <0x70 0x10>;
> + #thermal-sensor-cells = <1>;
> };
> };
>
> --
> 2.17.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2018-09-21 14:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 8:14 [RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon Miquel Raynal
2018-08-30 8:14 ` [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file Miquel Raynal
2018-09-21 14:15 ` Gregory CLEMENT
2018-08-30 8:15 ` [RESEND PATCH 3/4] arm64: dts: marvell: add macro to make distinction between node names Miquel Raynal
2018-09-21 14:15 ` Gregory CLEMENT
2018-08-30 8:15 ` [RESEND PATCH 4/4] arm64: dts: marvell: add thermal-zone node in cp110 DTSI file Miquel Raynal
2018-09-21 14:15 ` Gregory CLEMENT [this message]
2018-09-21 14:14 ` [RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bm8rgcmp.fsf@bootlin.com \
--to=gregory.clement@bootlin$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox