Subject: [GIT PULL 3/3] 2nd Round Samsung mach-exynos for v3.12

From: [email-masked] (Kevin Hilman)
Date: Mon, 26 Aug 2013 21:08:37 -0700

amit daniel kachhap <[email-masked]> writes:

> Submitted the V2 version of this patch with your suggestion.

So will there be an updated branch (and pull request) with these changes?

Kevin

> On Mon, Aug 26, 2013 at 4:49 PM, Bartlomiej Zolnierkiewicz
> <[email-masked]> wrote:
>> On Monday, August 26, 2013 04:33:55 PM amit daniel kachhap wrote:
>>> Hi,
>>>
>>> On Mon, Aug 26, 2013 at 3:36 PM, Bartlomiej Zolnierkiewicz
>>> <[email-masked]> wrote:
>>> >
>>> > Hi,
>>> >
>>> > On Monday, August 26, 2013 09:14:42 AM Kukjin Kim wrote:
>>> >> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
>>> >>
>>> >>   Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
>>> >>
>>> >> are available in the git repository at:
>>> >>
>>> >>   git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>>> >> tags/samsung-mach-exynos
>>> >>
>>> >> for you to fetch changes up to f52616f4233d71d0fb00f06f86d046d18d2b7f3b:
>>> >>
>>> >>   ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 (2013-08-19
>>> >> 05:05:16 +0900)
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> update mach-exynos
>>> >> - enable ARCH_HAS_BANDGAP for exynos SoCs
>>> >> - skip C1 cpuidle for exynos5440 because non-supporting
>>> >> - always enable PM domains for exynos4x12
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Amit Daniel Kachhap (2):
>>> >>       ARM: EXYNOS: enable ARCH_HAS_BANDGAP
>>> >>       ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
>>> >
>>> > The patch "ARM: EXYNOS: Skip C1 cpuidle state for exynos5440":
>>> >
>>> > --- a/arch/arm/mach-exynos/cpuidle.c
>>> > +++ b/arch/arm/mach-exynos/cpuidle.c
>>> > @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
>>> >                 device->cpu = cpu_id;
>>> >
>>> >                 /* Support IDLE only */
>>> > -               if (cpu_id != 0)
>>> > +               if (soc_is_exynos5440() || cpu_id != 0)
>>> >                         device->state_count = 1;
>>> >
>>> >                 ret = cpuidle_register_device(device);
>>> >
>>> > is incorrect as noted a month ago in:
>>> >
>>> > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/186355.html
>>> >
>>> > [ Because of the deficiency in the core cpuidle core (device->state_count
>>> >   not being used by governors' code) only sysfs entries for C1 state will be
>>> >   disabled and EXYNOS cpuidle driver will still attempt to use C1 state.
>>> >
>>> > also non-working device->state_count is planned to be removed by:
>>> >
>>> > http://permalink.gmane.org/gmane.linux.power-management.general/37390
>>> I looked at your patch series and it seems reasonable. I will repost
>>> this patch on top of yours.
>>
>> If you correctly use driver's state_count (instead of device's) there will be
>> no dependency on my patch series and the new patch can be applied immediately.
>>
>>> But I suggest to keep this patch temporary till your patch series gets merged.
>>
>> The current patch (the one Kukjin merged) is incorrect as it just doesn't
>> do what it advertises. I see no reason to keep it.
>>
>> Best regards,
>> --
>> Bartlomiej Zolnierkiewicz
>> Samsung R&D Institute Poland
>> Samsung Electronics
>>
>>> Thanks,
>>> Amit Daniel
>>> >
>>> >
>>> > To disable C1 state on EXYNOS5440 something like:
>>> >
>>> >         static int __init exynos4_init_cpuidle(void)
>>> >         {
>>> >         ...
>>> >                 if (soc_is_exynos5440())
>>> >                         exynos4_idle_driver.state_count = 1;
>>> >         ...
>>> >         }
>>> >
>>> > should be done instead.
>>> >
>>> > Best regards,
>>> > --
>>> > Bartlomiej Zolnierkiewicz
>>> > Samsung R&D Institute Poland
>>> > Samsung Electronics
>>> >
>>> >
>>> > _______________________________________________
>>> > linux-arm-kernel mailing list
>>> > linux-arm-kernel at lists.infradead.org
>>> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>>
>>> On Mon, Aug 26, 2013 at 3:36 PM, Bartlomiej Zolnierkiewicz
>>> <[email-masked]> wrote:
>>> >
>>> > Hi,
>>> >
>>> > On Monday, August 26, 2013 09:14:42 AM Kukjin Kim wrote:
>>> >> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
>>> >>
>>> >>   Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
>>> >>
>>> >> are available in the git repository at:
>>> >>
>>> >>   git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>>> >> tags/samsung-mach-exynos
>>> >>
>>> >> for you to fetch changes up to f52616f4233d71d0fb00f06f86d046d18d2b7f3b:
>>> >>
>>> >>   ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 (2013-08-19
>>> >> 05:05:16 +0900)
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> update mach-exynos
>>> >> - enable ARCH_HAS_BANDGAP for exynos SoCs
>>> >> - skip C1 cpuidle for exynos5440 because non-supporting
>>> >> - always enable PM domains for exynos4x12
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Amit Daniel Kachhap (2):
>>> >>       ARM: EXYNOS: enable ARCH_HAS_BANDGAP
>>> >>       ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
>>> >
>>> > The patch "ARM: EXYNOS: Skip C1 cpuidle state for exynos5440":
>>> >
>>> > --- a/arch/arm/mach-exynos/cpuidle.c
>>> > +++ b/arch/arm/mach-exynos/cpuidle.c
>>> > @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
>>> >                 device->cpu = cpu_id;
>>> >
>>> >                 /* Support IDLE only */
>>> > -               if (cpu_id != 0)
>>> > +               if (soc_is_exynos5440() || cpu_id != 0)
>>> >                         device->state_count = 1;
>>> >
>>> >                 ret = cpuidle_register_device(device);
>>> >
>>> > is incorrect as noted a month ago in:
>>> >
>>> > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/186355.html
>>> >
>>> > [ Because of the deficiency in the core cpuidle core (device->state_count
>>> >   not being used by governors' code) only sysfs entries for C1 state will be
>>> >   disabled and EXYNOS cpuidle driver will still attempt to use C1 state.
>>> >
>>> > also non-working device->state_count is planned to be removed by:
>>> >
>>> > http://permalink.gmane.org/gmane.linux.power-management.general/37390
>>> >
>>> >
>>> > To disable C1 state on EXYNOS5440 something like:
>>> >
>>> >         static int __init exynos4_init_cpuidle(void)
>>> >         {
>>> >         ...
>>> >                 if (soc_is_exynos5440())
>>> >                         exynos4_idle_driver.state_count = 1;
>>> >         ...
>>> >         }
>>> >
>>> > should be done instead.
>>> >
>>> > Best regards,
>>> > --
>>> > Bartlomiej Zolnierkiewicz
>>> > Samsung R&D Institute Poland
>>> > Samsung Electronics
>>> >
>>> >
>>> > _______________________________________________
>>> > linux-arm-kernel mailing list
>>> > linux-arm-kernel at lists.infradead.org
>>> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel