From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio
Date: Tue, 26 Jan 2016 09:58:57 +0100 [thread overview]
Message-ID: <87egd4d8dq.fsf@free-electrons.com> (raw)
In-Reply-To: <1453588600-14831-2-git-send-email-aaro.koskinen@iki.fi> (Aaro Koskinen's message of "Sun, 24 Jan 2016 00:36:39 +0200")
Hi Aaro,
On sam., janv. 23 2016, Aaro Koskinen <aaro.koskinen@iki•fi> wrote:
> Fix audio on kirkwood-openrd-client:
>
> 1) The audio-controller was left disabled.
>
> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
>
> /sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp at f1000000/i2c at 11000/cs42l51 at 4a
> asoc-simple-card sound: parse error -22
> asoc-simple-card: probe of sound failed with error -22
>
> 3) The mapping is incorrect:
>
> asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
>
> should be:
>
> asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
>
> Reported-by: Rick Thomas <rbthomas@pobox•com>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki•fi>
Applied on mvebu/dt with Reviewed-by tag from Andrew Lunn and Tested-by
tag from Rick Thomas.
Thanks,
Gregory
> ---
> arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
> arch/arm/boot/dts/kirkwood.dtsi | 2 +-
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> index 887b9c1..96ff59d 100644
> --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
> +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> @@ -20,6 +20,9 @@
> compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
>
> ocp at f1000000 {
> + audio-controller at a0000 {
> + status = "okay";
> + };
> i2c at 11000 {
> status = "okay";
> clock-frequency = <400000>;
> @@ -27,6 +30,7 @@
> cs42l51: cs42l51 at 4a {
> compatible = "cirrus,cs42l51";
> reg = <0x4a>;
> + #sound-dai-cells = <0>;
> };
> };
> };
> @@ -37,7 +41,7 @@
> simple-audio-card,mclk-fs = <256>;
>
> simple-audio-card,cpu {
> - sound-dai = <&audio0>;
> + sound-dai = <&audio0 0>;
> };
>
> simple-audio-card,codec {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b5a4a1..7445a15 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -381,7 +381,7 @@
>
> audio0: audio-controller at a0000 {
> compatible = "marvell,kirkwood-audio";
> - #sound-dai-cells = <0>;
> + #sound-dai-cells = <1>;
> reg = <0xa0000 0x2210>;
> interrupts = <24>;
> clocks = <&gate_clk 9>;
> --
> 2.4.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2016-01-26 8:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 22:36 [PATCH 0/2] ARM/sound: fix audio on kirkwood-openrd-client Aaro Koskinen
2016-01-23 22:36 ` [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio Aaro Koskinen
2016-01-24 17:37 ` Andrew Lunn
2016-01-24 20:56 ` Rick Thomas
2016-01-24 21:40 ` Martin Michlmayr
2016-01-25 3:26 ` Rick Thomas
2016-01-25 18:24 ` Aaro Koskinen
2016-01-26 1:55 ` Rick Thomas
2016-01-26 3:50 ` Rick Thomas
2016-01-26 8:58 ` Gregory CLEMENT [this message]
2016-01-23 22:36 ` [PATCH 2/2] ASoC: simple-card: don't fail if sysclk setting is not supported Aaro Koskinen
2016-01-24 17:39 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87egd4d8dq.fsf@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox