From: khilman@linaro•org (Kevin Hilman)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 0/4] Exynos 5410 Dual cluster support
Date: Wed, 30 Oct 2013 16:57:31 -0700 [thread overview]
Message-ID: <87fvrinwgk.fsf@linaro.org> (raw)
In-Reply-To: <CAGc3s_cbCgdPdbCPF2XN+p-O5RfM-4pNZT49=_4MOVy=Lz8d=Q@mail.gmail.com> (Mauro Ribeiro's message of "Tue, 29 Oct 2013 07:23:33 -0200")
Hi Mauro,
Mauro Ribeiro <mdrjr0@gmail•com> writes:
> Kevin,
>
> https://github.com/hardkernel/u-boot/tree/odroid-v2012.07
Yes, this is the one I'm using, but USB networking doesn't seem to work
with that. Do you have USB networking working with that u-boot? If so,
what changes to the config did you make?
Kevin
>
> On Thu, Oct 17, 2013 at 5:00 PM, Kevin Hilman <khilman@linaro•org> wrote:
>
>> Aliaksei Katovich <aliaksei.katovich@gmail•com> writes:
>>
>> > hi Kevin;
>> >
>> >> Vyacheslav Tyrtov <v.tyrtov@samsung•com> writes:
>> >>
>> >> > The series of patches represent support of Exynos 5410 SoC
>> >> >
>> >> > The Exynos 5410 is the first Samsung SoC based on bigLITTLE
>> architecture.
>> >> > Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same
>> time
>> >> >
>> >> > Patches add new platform description, support of clock controller,
>> >> > dual cluster support and device tree for Exynos 5410
>> >> >
>> >> > Has been build on v3.12-rc5.
>> >> > Has been tested on Exynos 5410 reference board (exynos_defconfig).
>> >>
>> >> Has anyone tried this on the exynos5410 based odroid-xu yet?
>> >>
>> >> I tried booting this on my recently arrived odroid-xu, but am not
>> >> getting it to boot.
>> >
>> > I am able to boot my odroid-xu+e to busybox with these patches
>> applied
>> > against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were
>> > used.
>> >
>> > However there seem to be some issues with virq allocations, like
>> this:
>>
>> Ah, I've seen the same thing, but for me it doesn't boot reliably.
>> Sometimes there's an immediate fault like this[1], and once in a rare
>> while, it starts to boot and I see the same virq errors.
>>
>> Curious what you guys are using for boot loaders. I found some
>> pre-build u-boot binaries along with the necessary BL1/2 binary blobs in
>> the hardkernel kernel repo: https://github.com/hardkernel/linux.git
>> branch: origin/odroidxu-3.4.y
>> path: tools/hardkernel/u-boot-pre-built
>>
>> Unfortunatly, that u-boot doesn't have usb networking support built in
>> so I couln't use u-boot to tftp the kernel, so I was able to use fasboot
>> to load the kernel/ramdisk, but it's very flaky.
>>
>> Do you have an pointers of where to get a known working bootloader.
>> Ideally, a u-boot with networking/tftp support would be ideal.
>>
>> Thanks,
>>
>> Kevin
>>
>> [1]
>> USB cable Connected![0x4]
>> Starting download of 10008576 bytes
>> .........
>> downloading of 10008576 bytes finished
>> Kernel size: 00296bc5
>> Ramdisk size: 006f3c00
>> Booting kernel..
>> ## Booting kernel from Legacy Image at 40008000 ...
>> Image Name: Linux
>> Image Type: ARM Linux Kernel Image (uncompressed)
>> Data Size: 2714501 Bytes = 2.6 MiB
>> Load Address: 40008000
>> Entry Point: 40008000
>> Verifying Checksum ... OK
>> XIP Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> undefined instruction
>> pc : [<4000800c>] lr : [<bfc65df4>]
>> sp : bfb5bbc8 ip : 00000000 fp : 00001251
>> r10: 00000000 r9 : 00000000 r8 : bfb5bf30
>> r7 : 00000000 r6 : 00000000 r5 : 40008000 r4 : bfcabac0
>> r3 : bfb5bfa8 r2 : 40000100 r1 : 00001251 r0 : 00000000
>> Flags: nZCv IRQs off FIQs off Mode SVC_32
>> Resetting CPU ...
>>
>> emmc resetting ...
>> resetting ...
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
prev parent reply other threads:[~2013-10-30 23:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 15:08 [PATCH v2 0/4] Exynos 5410 Dual cluster support Vyacheslav Tyrtov
2013-10-14 15:08 ` [PATCH v2 1/4] ARM: EXYNOS: Add support for EXYNOS5410 SoC Vyacheslav Tyrtov
2013-11-01 17:08 ` Tomasz Figa
2013-11-01 21:52 ` Rob Herring
2013-11-01 23:02 ` Tomasz Figa
2013-10-14 15:08 ` [PATCH v2 2/4] clk: exynos5410: register clocks using common clock framework Vyacheslav Tyrtov
2013-10-22 9:44 ` Mike Turquette
2013-11-01 15:53 ` Mauro Ribeiro
2013-11-01 16:25 ` Mauro Ribeiro
2013-11-01 16:58 ` Tomasz Figa
2013-11-05 9:15 ` Tarek Dakhran
2013-10-14 15:08 ` [PATCH v2 3/4] ARM: EXYNOS: add Exynos Dual Cluster Support Vyacheslav Tyrtov
2013-10-17 10:45 ` Daniel Lezcano
2013-10-25 10:06 ` Aliaksei Katovich
2013-11-04 10:42 ` Alexei Colin
2013-11-04 17:12 ` Alexei Colin
2013-10-14 15:08 ` [PATCH v2 4/4] ARM: dts: Add initial device tree support for EXYNOS5410 Vyacheslav Tyrtov
2013-11-01 17:09 ` Tomasz Figa
2013-10-16 22:15 ` [PATCH v2 0/4] Exynos 5410 Dual cluster support Kevin Hilman
2013-10-17 13:04 ` Aliaksei Katovich
2013-10-17 13:51 ` Tarek Dakhran
2013-10-17 14:24 ` Aliaksei Katovich
2013-10-17 14:02 ` Tarek Dakhran
2013-10-17 20:00 ` Kevin Hilman
[not found] ` <CAGc3s_cbCgdPdbCPF2XN+p-O5RfM-4pNZT49=_4MOVy=Lz8d=Q@mail.gmail.com>
2013-10-30 23:57 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fvrinwgk.fsf@linaro.org \
--to=khilman@linaro$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox