Subject: [PATCH v3 13/13] OMAP: PM: DMA: Enable runtime pm

From: [email-masked] (Kevin Hilman)
Date: Tue, 09 Nov 2010 14:48:25 -0800

"G, Manjunath Kondaiah" <[email-masked]> writes:

> Enable runtime pm and use pm_runtime_get and pm_runtime_put
> for OMAP DMA driver.
>
> Signed-off-by: G, Manjunath Kondaiah <[email-masked]>
> Cc: Benoit Cousson <[email-masked]>
> Cc: Kevin Hilman <[email-masked]>
> Cc: Santosh Shilimkar <[email-masked]>
> ---
>  arch/arm/plat-omap/dma.c |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> index 41b14b0..feac7ee 100644
> --- a/arch/arm/plat-omap/dma.c
> +++ b/arch/arm/plat-omap/dma.c
> @@ -35,6 +35,7 @@
>  #include <linux/io.h>
>  #include <linux/slab.h>
>  #include <linux/delay.h>
> +#include <linux/pm_runtime.h>
>  
>  #include <asm/system.h>
>  #include <mach/hardware.h>
> @@ -367,6 +368,8 @@ int omap_request_dma(int dev_id, const char *dev_name,
>  	chan = dma_chan + free_ch;
>  	chan->dev_id = dev_id;
>  
> +	pm_runtime_get(&pd->dev);

The _get() call is asynchronous.  So if the device was actually
idled/disabled, immediately after this call it may still be
idle/disabled.   When using the asynchronous versions of the API, the
device should not be touched until the driver's ->runtime_resume()
callback is called.

>  	if (d->dev_caps & IS_WORD_16)
>  		p->clear_lch_regs(free_ch);
>  	else
> @@ -452,6 +455,7 @@ void omap_free_dma(int lch)
>  		omap_clear_dma(lch);
>  		p->clear_dma_sglist_mode(lch);
>  	}
> +	pm_runtime_put(&pd->dev);
>  	spin_lock_irqsave(&dma_chan_lock, flags);
>  	dma_chan[lch].dev_id = -1;
>  	dma_chan[lch].next_lch = -1;
> @@ -819,6 +823,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
>  	dma_chan_count		= d->chan_count;
>  	dma_chan		= d->chan;
>  
> +	/* Enable run time PM */

comment is redundant

> +	pm_runtime_enable(&pd->dev);
> +
> +	/* Accessing hw registers, get clock */

comment is wrong, driver doesn't know anything about clocks.
Just drop comment as it doesn't tell you anything that the following
'get' doesn't.

> +	pm_runtime_get(&pd->dev);

see above Re: async calls.

>  	for (ch = 0; ch < dma_chan_count; ch++) {
>  		unsigned long flags;
>  		omap_clear_dma(ch);
> @@ -846,6 +855,10 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
>  		dma_chan[0].dev_id = 0;
>  		dma_chan[1].dev_id = 1;
>  	}
> +
> +	if (!omap_dma_reserve_channels)
> +		pm_runtime_put(&pd->dev);
> +

So if the reserve channels feature is used, PM is essentially disabled
for sDMA.  You should add a warning here to that effect as well.

>  	return 0;
>  exit_release_region:

Kevin