From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
Date: Wed, 15 Feb 2017 16:18:04 +0100 [thread overview]
Message-ID: <87inobcwk3.fsf@free-electrons.com> (raw)
In-Reply-To: <20170214191744.9419-1-ralph.sennhauser@gmail.com> (Ralph Sennhauser's message of "Tue, 14 Feb 2017 20:17:42 +0100")
Hi Ralph,
On mar., f?vr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail•com> wrote:
> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
> the Linksys WRT AC Series which got released in October 2015.
>
> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
> originally authored by Imre Kaloz.
>
> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> CC: Imre Kaloz <kaloz@openwrt•org>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail•com>
> Signed-off-by: Imre Kaloz <kaloz@openwrt•org>
> Reviewed-by: Andrew Lunn <andrew@lunn•ch>
> Acked-by: Jason Cooper <jason@lakedaemon•net>
Applied on mvebu/dt-4.12
Thanks,
Gregory
> ---
>
> Notes:
> V1 -> V2:
> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
> - add collected tags, thanks to donors ;)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
> 2 files changed, 115 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0118084..16f1748 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
> armada-385-db-ap.dtb \
> armada-385-linksys-caiman.dtb \
> armada-385-linksys-cobra.dtb \
> + armada-385-linksys-shelby.dtb \
> armada-385-turris-omnia.dtb \
> armada-388-clearfog.dtb \
> armada-388-clearfog-base.dtb \
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> new file mode 100644
> index 0000000..c7a8ddd
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
> + *
> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt•org>
> + *
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-385-linksys.dtsi"
> +
> +/ {
> + model = "Linksys WRT1900ACS";
> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
> + "marvell,armada380";
> +
> + soc {
> + internal-regs{
> + i2c at 11000 {
> +
> + pca9635 at 68 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wan_amber at 0 {
> + label = "shelby:amber:wan";
> + reg = <0x0>;
> + };
> +
> + wan_white at 1 {
> + label = "shelby:white:wan";
> + reg = <0x1>;
> + };
> +
> + wlan_2g at 2 {
> + label = "shelby:white:wlan_2g";
> + reg = <0x2>;
> + };
> +
> + wlan_5g at 3 {
> + label = "shelby:white:wlan_5g";
> + reg = <0x3>;
> + };
> +
> + usb2 at 5 {
> + label = "shelby:white:usb2";
> + reg = <0x5>;
> + };
> +
> + usb3_1 at 6 {
> + label = "shelby:white:usb3_1";
> + reg = <0x6>;
> + };
> +
> + usb3_2 at 7 {
> + label = "shelby:white:usb3_2";
> + reg = <0x7>;
> + };
> +
> + wps_white at 8 {
> + label = "shelby:white:wps";
> + reg = <0x8>;
> + };
> +
> + wps_amber at 9 {
> + label = "shelby:amber:wps";
> + reg = <0x9>;
> + };
> + };
> + };
> + };
> + };
> +
> + gpio-leds {
> + power {
> + label = "shelby:white:power";
> + };
> +
> + sata {
> + label = "shelby:white:sata";
> + };
> + };
> +};
> --
> 2.10.2
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-02-15 15:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-14 19:17 [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby) Ralph Sennhauser
2017-02-15 15:18 ` Gregory CLEMENT [this message]
2017-03-07 17:27 ` Gregory CLEMENT
2017-03-07 17:48 ` Ralph Sennhauser
2017-03-08 8:54 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87inobcwk3.fsf@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox