From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806
Date: Thu, 08 Jun 2017 19:09:15 +0200 [thread overview]
Message-ID: <87lgp2pft0.fsf@free-electrons.com> (raw)
In-Reply-To: <e12e9b027462646e16cb51783d6e14660a019ba6.1496239589.git-series.gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Wed, 31 May 2017 16:07:28 +0200")
Hi,
On mer., mai 31 2017, Gregory CLEMENT <gregory.clement@free-electrons•com> wrote:
> The new binding for the system controller on ap806 moved the clock into a
> subnode. This preliminary step will allow to add gpio and pinctrl
> subnodes
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
Applied on mvebu/dt64
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 0c25ec62a2a3..205037e3e7dc 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -193,7 +193,7 @@
> #size-cells = <0>;
> cell-index = <0>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -204,7 +204,7 @@
> #size-cells = <0>;
> interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -214,7 +214,7 @@
> reg-shift = <2>;
> interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -224,7 +224,7 @@
> reg-shift = <2>;
> interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
>
> };
> @@ -234,17 +234,20 @@
> reg = <0x6e0000 0x300>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "core";
> - clocks = <&ap_syscon 4>;
> + clocks = <&ap_clk 4>;
> dma-coherent;
> marvell,xenon-phy-slow-mode;
> status = "disabled";
> };
>
> ap_syscon: system-controller at 6f4000 {
> - compatible = "marvell,ap806-system-controller",
> - "syscon";
> - #clock-cells = <1>;
> + compatible = "syscon", "simple-mfd";
> reg = <0x6f4000 0x1000>;
> +
> + ap_clk: clock {
> + compatible = "marvell,ap806-clock";
> + #clock-cells = <1>;
> + };
> };
> };
> };
> --
> git-series 0.9.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-06-08 17:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-31 14:07 [PATCH v2 0/7] Improve ap806 clk support on Marvell Armada 7K/8K Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 1/7] clk: mvebu: ap806: cosmetic improvement Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 2/7] dt-bindings: ap806: do not depend anymore of the *-clock-output-names Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 3/7] clk: mvebu: " Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 4/7] dt-bindings: ap806: introduce a new binding Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 5/7] clk: mvebu: " Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 6/7] arm64: dts: marvell: remove clock-output-names on ap806 Gregory CLEMENT
2017-06-08 17:08 ` Gregory CLEMENT
2017-05-31 14:07 ` [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller " Gregory CLEMENT
2017-06-08 17:09 ` Gregory CLEMENT [this message]
2017-06-01 9:50 ` [PATCH v2 0/7] Improve ap806 clk support on Marvell Armada 7K/8K Michael Turquette
2017-06-02 13:52 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lgp2pft0.fsf@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox