Subject: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c

From: [email-masked] (Arnaud Patard (Rtp))
Date: Mon, 17 Jun 2013 10:06:29 +0200

Sricharan R <[email-masked]> writes:

Hi,

[...]

> Starting kernel ...
>
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 3.10.0-rc4-next-20130607 (a0393807 at uda0393807) (gcc version 4.6.3 (Sourcery CodeBench Lite 2012.03-57) ) #18 SMP Mon Jun 17 12:55:05 IST 2013
> [    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [    0.000000] Machine: OMAP4 Panda board
> [    0.000000] cma: CMA: reserved 16 MiB at ae800000
> [    0.000000] Memory policy: ECC disabled, Data cache writealloc
> [    0.000000] OMAP4430 ES2.1
> [    0.000000] PERCPU: Embedded 9 pages/cpu @c15d5000 s13440 r8192 d15232 u36864
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260368
> [    0.000000] Kernel command line: root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 earlyprintk
> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [    0.000000] Memory: 987436K/1047552K available (5619K kernel code, 603K rwdata, 1908K rodata, 393K init, 5521K bss, 60116K reserved, 269312K highmem)
> [    0.000000] Virtual kernel memory layout:
> [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
> [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
> [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
> [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
> [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
> [    0.000000]       .text : 0xc0008000 - 0xc07620e8   (7529 kB)
> [    0.000000]       .init : 0xc0763000 - 0xc07c5480   ( 394 kB)
> [    0.000000]       .data : 0xc07c6000 - 0xc085ccc8   ( 604 kB)
> [    0.000000]        .bss : 0xc085ccc8 - 0xc0dc10f0   (5522 kB)
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:16 nr_irqs:16 16
> [    0.000000] OMAP clockevent source: timer1 at 32768 Hz
> [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
> [    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
> [    0.000000] Console: colour dummy device 80x30
> [    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
> [    0.000000] ... MAX_LOCK_DEPTH:          48
> [    0.000000] ... MAX_LOCKDEP_KEYS:        8191
> [    0.000000] ... CLASSHASH_SIZE:          4096
> [    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
> [    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
> [    0.000000] ... CHAINHASH_SIZE:          16384
> [    0.000000]  memory used by lock dependency info: 3695 kB
> [    0.000000]  per task-struct memory footprint: 1152 bytes
> [    0.001403] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
> [    0.079742] pid_max: default: 32768 minimum: 301
> [    0.080535] Security Framework initialized
> [    0.080780] Mount-cache hash table entries: 512
> [    0.085571] CPU: Testing write buffer coherency: ok
> [    0.087493] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    0.087829] Setting up static identity map for 0xc0556058 - 0xc05560c8
> [    0.087890] L310 cache controller enabled
> [    0.087921] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
> [    0.093048] CPU1: Booted secondary processor
> [    0.177764] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [    0.178283] Brought up 2 CPUs
> [    0.178314] SMP: Total of 2 processors activated (2387.96 BogoMIPS).
> [    0.178314] CPU: All CPU(s) started in SVC mode.
> [    0.181152] devtmpfs: initialized
> [    0.254455] pinctrl core: initialized pinctrl subsystem
> [    0.258117] regulator-dummy: no parameters
> [    0.261657] NET: Registered protocol family 16
> [    0.270538] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [    0.272033] omap-gpmc omap-gpmc: GPMC revision 6.0
> [    0.281036] OMAP GPIO hardware version 0.1
> [    0.295837] omap_mux_init: Add partition: #1: core, flags: 3
> [    0.298095] omap_mux_init: Add partition: #2: wkup, flags: 3
> [    0.298309] error setting wl12xx data: -38
> [    0.298583] omap_mux_get_by_name: Could not find signal sys_nirq
> [    0.303375] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
> [    0.384521] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
> [    0.384521] hw-breakpoint: maximum watchpoint size is 4 bytes.
> [    0.398803] OMAP DMA hardware revision 0.0
> [    0.402832] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
> [    0.449371] bio: create slab <bio-0> at 0
> [    0.514038] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
> [    0.515258] vwl1271: 1800 mV
> [    0.516174] hsusb1_reset: 3300 mV
> [    0.516967] hsusb1_vcc: 3300 mV
> [    0.522064] SCSI subsystem initialized
> [    0.523773] usbcore: registered new interface driver usbfs
> [    0.524139] usbcore: registered new interface driver hub
> [    0.524658] usbcore: registered new device driver usb
> [    0.528869] omap_i2c omap_i2c.1: bus 1 rev0.10 at 400 kHz
> [    0.529907] omap_i2c omap_i2c.2: bus 2 rev0.10 at 400 kHz
> [    0.531280] omap_i2c omap_i2c.3: bus 3 rev0.10 at 100 kHz
> [    0.532226] omap_i2c omap_i2c.4: bus 4 rev0.10 at 400 kHz
> [    0.538391] Switching to clocksource 32k_counter
> [    0.655364] NET: Registered protocol family 2
> [    0.657409] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> [    0.657806] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
> [    0.660980] TCP: Hash tables configured (established 8192 bind 8192)
> [    0.661315] TCP: reno registered
> [    0.661346] UDP hash table entries: 512 (order: 3, 40960 bytes)
> [    0.661773] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> [    0.663421] NET: Registered protocol family 1
> [    0.664733] RPC: Registered named UNIX socket transport module.
> [    0.664764] RPC: Registered udp transport module.
> [    0.664764] RPC: Registered tcp transport module.
> [    0.664764] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.665740] Trying to unpack rootfs image as initramfs...
> [    0.666931] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
> [    0.819061] Freeing initrd memory: 20480K (c1600000 - c2a00000)
> [    0.819183] NetWinder Floating Point Emulator V0.97 (double precision)
> [    1.007995] bounce pool size: 64 pages
> [    1.008575] VFS: Disk quotas dquot_6.5.2
> [    1.009033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    1.011779] NFS: Registering the id_resolver key type
> [    1.012207] Key type id_resolver registered
> [    1.012237] Key type id_legacy registered
> [    1.012390] jffs2: version 2.2. (NAND) (SUMMARY)  ? 2001-2006 Red Hat, Inc.
> [    1.013031] msgmni has been set to 1474
> [    1.016387] io scheduler noop registered
> [    1.016418] io scheduler deadline registered
> [    1.016510] io scheduler cfq registered (default)
> [    1.020660] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    1.027069] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
> [    1.029296] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
> [    1.030670] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
> [    1.724426] console [ttyO2] enabled
> [    1.729583] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
> [    1.765686] brd: module loaded
> [    1.784973] loop: module loaded
> [    1.791503] Skipping twl internal clock init and using bootloader value (unknown osc rate)
> [    1.802978] twl 1-0048: PIH (irq 39) chaining IRQs 418..438
> [    1.811218] VUSB: 3300 mV normal standby
> [    1.816864] vdd_mpu: 500 <--> 1500 mV normal
> [    1.823730] vdd_iva: 500 <--> 1500 mV normal
> [    1.829803] vdd_core: 500 <--> 1500 mV normal
> [    1.836334] V1V8: 1800 mV normal standby
> [    1.841979] V2V1: 2100 mV normal standby
> [    1.847717] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
> [    1.855773] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
> [    1.864196] VCXIO: 1800 mV normal standby
> [    1.868499] VCXIO: supplied by V2V1
> [    1.875030] VDAC: 1800 mV normal standby
> [    1.879333] VDAC: supplied by V2V1
> [    1.885223] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
> [    1.893768] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
> [    1.903076] VANA: 2100 mV normal standby
> [    1.917877] mtdoops: mtd device (mtddev=name/number) must be supplied
> [    1.934997] usbcore: registered new interface driver asix
> [    1.941284] usbcore: registered new interface driver ax88179_178a
> [    1.948089] usbcore: registered new interface driver cdc_ether
> [    1.954681] usbcore: registered new interface driver smsc95xx
> [    1.961242] usbcore: registered new interface driver net1080
> [    1.967559] usbcore: registered new interface driver cdc_subset
> [    1.974243] usbcore: registered new interface driver zaurus
> [    1.980621] usbcore: registered new interface driver cdc_ncm
> [    1.988220] usbcore: registered new interface driver cdc_wdm
> [    1.994659] usbcore: registered new interface driver usb-storage
> [    2.001464] usbcore: registered new interface driver usbtest
> [    2.009277] mousedev: PS/2 mouse device common for all mice
> [    2.020721] twl_rtc twl_rtc: Enabling TWL-RTC
> [    2.030181] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
> [    2.059692] i2c /dev entries driver
> [    2.067108] Driver for 1-wire Dallas network protocol.
> [    2.076293] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
> [    2.086364] omap-dma-engine omap-dma-engine: allocating channel for 62
> [    2.093414] omap-dma-engine omap-dma-engine: allocating channel for 61
> [    2.139251] omap-dma-engine omap-dma-engine: allocating channel for 60
> [    2.146209] omap-dma-engine omap-dma-engine: allocating channel for 59
> [    2.262664] ledtrig-cpu: registered to indicate activity on CPUs
> [    2.270233] usbcore: registered new interface driver usbhid
> [    2.276153] usbhid: USB HID core driver
> [    2.281402] oprofile: no performance counters
> [    2.288024] oprofile: using timer interrupt.
> [    2.293334] TCP: cubic registered
> [    2.296844] Initializing XFRM netlink socket
> [    2.301544] NET: Registered protocol family 17
> [    2.306365] NET: Registered protocol family 15
> [    2.311614] Key type dns_resolver registered
> [    2.316284] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
> [    2.334320] Power Management for TI OMAP4.
> [    2.338684] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
> [    2.346069] ThumbEE CPU extension supported.
> [    2.354187] VANA: incomplete constraints, leaving on
> [    2.361175] VDAC: incomplete constraints, leaving on
> [    2.367614] VUSB: incomplete constraints, leaving on
> [    2.377258] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:03:17 UTC (946684997)
> [    2.388793] RAMDISK: ext2 filesystem found at block 0
> [    2.395324] RAMDISK: Loading 10000KiB [1 disk] into ram disk... [    2.410461] mmc0: host does not support reading read-only switch. assuming write-enable.
> [    2.424896] mmc0: new high speed SD card at address 0002
> [    2.436248] mmcblk0: mmc0:0002 00000 1.86 GiB
> [    2.455200]  mmcblk0: p1 p2
> done.
> [    2.858886] EXT2-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
> [    2.858886] VFS: Mounted root (ext2 filesystem) on device 1:0.
> [    2.874725] devtmpfs: mounted
> [    2.879028] Freeing unused kernel memory: 392K (c0763000 - c07c5000)
> Mounting proc : OK
> Mounting sysfs : OK
> Mounting /dev : OK
> Creating local mdev devices
> umount: can't umount /mnt/mmc: Invalid argument
>
> ******************************************
> Starting System Init for 6430EVM-6430
> Release: OpnSrc
> ******************************************
> Saving kernel ring buffer : OK
> Mounting devpts : OK
> Setting up networking
> Configuring lo : OK
> Configuring eth0 : ifconfig: eth0: error fetching interface information: Device not found
> ifup: can't open '/etc/network/interfaces': No such file or directory
> Failed

I hoped to have missed some mails and that people were testing pandabard
support with full support but given what I see, the ethernet support is
not there yet. This thread is about removing the non-DT boot. I see some
contradiction here. Please, look again at what Thomas said in the IGEP thread:
breaking existing support is bad and removing non-DT boot for panda with
not-working ethernet would exactly to that.

Yeah, I'm aware that some extra patches are being developped like the
omap clocks one: https://patchwork.kernel.org/patch/2541331/ but they
don't seem to be in -next. So, again, please, wait that all needed bits
are merged mainline before killing non-DT support (or provide 'mixed'
support like what is/was done on kirkwood)

Thanks,
Arnaud