Subject: Re: [PATCH] arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB

From: Gregory CLEMENT <[email-masked]>
Date: Thu, 06 Dec 2018 16:55:05 +0100

Hi Baruch,
 
 On jeu., déc. 06 2018, Baruch Siach <[email-masked]> wrote:

> Enable the USB3 peripheral that is wired to CON2 on the Clearfog GT-8K
> board.
>
> Signed-off-by: Baruch Siach <[email-masked]>
> ---
>  arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> index dfb26661a88e..5b4a9609e31f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> @@ -282,6 +282,10 @@
>  	vqmmc-supply = <&v_3_3>;
>  };
>  
> +&cp0_usb3_1 {

Don't you have any phy for this USB3 port?

Gregory

> +	status = "okay";
> +};
> +
>  &cp1_pinctrl {
>  	/*
>  	 * MPP Bus:
> -- 
> 2.19.2

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel