Subject: [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver

From: [email-masked] (Kevin Hilman)
Date: Fri, 17 May 2013 07:29:04 -0700

Hi Paul,

Paul Walmsley <[email-masked]> writes:

> On Wed, 15 May 2013, Rajendra Nayak wrote:
>
>> OMAP UART IP needs manual idle modes based on functional state of the
>> IP. Currently this is handled by the driver with function pointers
>> implemented in platform code.
>> 
>> This however breaks in case of device tree because of missing
>> idle handling. 
>> 
>> The series tries to address the issue and tries to remove complete
>> sysc handling from serial driver.
>
> These look good to me.  Will queue them for v3.10-rc once they pass local 
> testing here.

I reviewed and tested v2 of this (Rajendra forgot to add the tags in
v3) and also just sanity tested v3 of this on 4430/panda DT boot to
verify the console issue is resolved.  Feel free to add:

Reviewed-by: Kevin Hilman <[email-masked]>
Tested-by: Kevin Hilman <[email-masked]>  # OMAP4/Panda

Kevin