From: Marc Zyngier <maz@kernel•org>
To: Yanan Wang <wangyanan55@huawei•com>
Cc: jiangkunkun@huawei•com, Gavin Shan <gshan@redhat•com>,
lushenming@huawei•com, Suzuki K Poulose <suzuki.poulose@arm•com>,
Catalin Marinas <catalin.marinas@arm•com>,
zhukeqian1@huawei•com, Quentin Perret <qperret@google•com>,
wangjingyi11@huawei•com, linux-kernel@vger•kernel.org,
yezengruan@huawei•com, James Morse <james.morse@arm•com>,
linux-arm-kernel@lists•infradead.org, yuzenghui@huawei•com,
wanghaibin.wang@huawei•com, Will Deacon <will@kernel•org>,
Julien Thierry <julien.thierry.kdev@gmail•com>
Subject: Re: [RFC PATCH] KVM: arm64: Add prejudgement for relaxing permissions only case in stage2 translation fault handler
Date: Fri, 11 Dec 2020 09:49:28 +0000 [thread overview]
Message-ID: <8d006755e5afce7e49b03993316c4fcc@kernel.org> (raw)
In-Reply-To: <20201211080115.21460-2-wangyanan55@huawei.com>
Hi Yanan,
On 2020-12-11 08:01, Yanan Wang wrote:
> In dirty-logging, or dirty-logging-stopped time, even normal running
> time of a guest configed with huge mappings and numbers of vCPUs,
> translation faults by different vCPUs on the same GPA could occur
> successively almost at the same time. There are two reasons for it.
>
> (1) If there are some vCPUs accessing the same GPA at the same time
> and the leaf PTE is not set yet, then they will all cause translation
> faults and the first vCPU holding mmu_lock will set valid leaf PTE,
> and the others will later choose to update the leaf PTE or not.
>
> (2) When changing a leaf entry or a table entry with break-before-make,
> if there are some vCPUs accessing the same GPA just catch the moment
> when the target PTE is set invalid in a BBM procedure coincidentally,
> they will all cause translation faults and will later choose to update
> the leaf PTE or not.
>
> The worst case can be like this: some vCPUs cause translation faults
> on the same GPA with different prots, they will fight each other by
> changing back access permissions of the PTE with break-before-make.
> And the BBM-invalid moment might trigger more unnecessary translation
> faults. As a result, some useless small loops will occur, which could
> lead to vCPU stuck.
>
> To avoid unnecessary update and small loops, add prejudgement in the
> translation fault handler: Skip updating the valid leaf PTE if we are
> trying to recreate exactly the same mapping or to reduce access
> permissions only(such as RW-->RO). And update the valid leaf PTE
> without
> break-before-make if we are trying to add more permissions only.
I'm a bit perplexed with this: why are you skipping the update if the
permissions need to be reduced? Even more, how can we reduce the
permissions from a vCPU fault? I can't really think of a scenario where
that happens.
Or are you describing a case where two vcpus fault simultaneously with
conflicting permissions:
- Both vcpus fault on translation fault
- vcpu A wants W access
- vpcu B wants R access
and 'A' gets in first, set the permissions to RW (because R is
implicitly added to W), followed by 'B' which downgrades it to RO?
If that's what you are describing, then I agree we could do better.
>
> Signed-off-by: Yanan Wang <wangyanan55@huawei•com>
> ---
> arch/arm64/kvm/hyp/pgtable.c | 73 +++++++++++++++++++++++++-----------
> 1 file changed, 52 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/kvm/hyp/pgtable.c
> b/arch/arm64/kvm/hyp/pgtable.c
> index 23a01dfcb27a..f8b3248cef1c 100644
> --- a/arch/arm64/kvm/hyp/pgtable.c
> +++ b/arch/arm64/kvm/hyp/pgtable.c
> @@ -45,6 +45,8 @@
>
> #define KVM_PTE_LEAF_ATTR_HI_S2_XN BIT(54)
>
> +#define KVM_PTE_LEAF_ATTR_PERMS (GENMASK(7, 6) | BIT(54))
> +
> struct kvm_pgtable_walk_data {
> struct kvm_pgtable *pgt;
> struct kvm_pgtable_walker *walker;
> @@ -170,10 +172,9 @@ static void kvm_set_table_pte(kvm_pte_t *ptep,
> kvm_pte_t *childp)
> smp_store_release(ptep, pte);
> }
>
> -static bool kvm_set_valid_leaf_pte(kvm_pte_t *ptep, u64 pa, kvm_pte_t
> attr,
> - u32 level)
> +static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32
> level)
> {
> - kvm_pte_t old = *ptep, pte = kvm_phys_to_pte(pa);
> + kvm_pte_t pte = kvm_phys_to_pte(pa);
> u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE
> :
> KVM_PTE_TYPE_BLOCK;
>
> @@ -181,12 +182,7 @@ static bool kvm_set_valid_leaf_pte(kvm_pte_t
> *ptep, u64 pa, kvm_pte_t attr,
> pte |= FIELD_PREP(KVM_PTE_TYPE, type);
> pte |= KVM_PTE_VALID;
>
> - /* Tolerate KVM recreating the exact same mapping. */
> - if (kvm_pte_valid(old))
> - return old == pte;
> -
> - smp_store_release(ptep, pte);
> - return true;
> + return pte;
> }
>
> static int kvm_pgtable_visitor_cb(struct kvm_pgtable_walk_data *data,
> u64 addr,
> @@ -341,12 +337,17 @@ static int hyp_map_set_prot_attr(enum
> kvm_pgtable_prot prot,
> static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level,
> kvm_pte_t *ptep, struct hyp_map_data *data)
> {
> + kvm_pte_t new, old = *ptep;
> u64 granule = kvm_granule_size(level), phys = data->phys;
>
> if (!kvm_block_mapping_supported(addr, end, phys, level))
> return false;
>
> - WARN_ON(!kvm_set_valid_leaf_pte(ptep, phys, data->attr, level));
> + /* Tolerate KVM recreating the exact same mapping. */
> + new = kvm_init_valid_leaf_pte(phys, data->attr, level);
> + if (old != new && !WARN_ON(kvm_pte_valid(old)))
> + smp_store_release(ptep, new);
> +
> data->phys += granule;
> return true;
> }
> @@ -461,25 +462,56 @@ static int stage2_map_set_prot_attr(enum
> kvm_pgtable_prot prot,
> return 0;
> }
>
> +static bool stage2_set_valid_leaf_pte_pre(u64 addr, u32 level,
> + kvm_pte_t *ptep, kvm_pte_t new,
> + struct stage2_map_data *data)
> +{
> + kvm_pte_t old = *ptep, old_attr, new_attr;
> +
> + if ((old ^ new) & (~KVM_PTE_LEAF_ATTR_PERMS))
> + return false;
> +
> + /*
> + * Skip updating if we are trying to recreate exactly the same
> mapping
> + * or to reduce the access permissions only. And update the valid
> leaf
> + * PTE without break-before-make if we are trying to add more access
> + * permissions only.
> + */
> + old_attr = (old & KVM_PTE_LEAF_ATTR_PERMS) ^
> KVM_PTE_LEAF_ATTR_HI_S2_XN;
> + new_attr = (new & KVM_PTE_LEAF_ATTR_PERMS) ^
> KVM_PTE_LEAF_ATTR_HI_S2_XN;
> + if (new_attr <= old_attr)
> + return true;
> +
> + WRITE_ONCE(*ptep, new);
> + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, data->mmu, addr, level);
I think what bothers me the most here is that we are turning a mapping
into
a permission update, which makes the code really hard to read, and mixes
two things that were so far separate.
I wonder whether we should instead abort the update and simply take the
fault
again, if we ever need to do it.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-11 9:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 8:01 [RFC PATCH 0/1] Add prejudgement for relaxing permissions only case Yanan Wang
2020-12-11 8:01 ` [RFC PATCH] KVM: arm64: Add prejudgement for relaxing permissions only case in stage2 translation fault handler Yanan Wang
2020-12-11 9:49 ` Marc Zyngier [this message]
2020-12-11 10:00 ` Will Deacon
2020-12-14 7:20 ` wangyanan (Y)
2020-12-15 13:18 ` Marc Zyngier
2020-12-14 7:20 ` wangyanan (Y)
2020-12-11 9:53 ` Will Deacon
2020-12-14 7:20 ` wangyanan (Y)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d006755e5afce7e49b03993316c4fcc@kernel.org \
--to=maz@kernel$(echo .)org \
--cc=catalin.marinas@arm$(echo .)com \
--cc=gshan@redhat$(echo .)com \
--cc=james.morse@arm$(echo .)com \
--cc=jiangkunkun@huawei$(echo .)com \
--cc=julien.thierry.kdev@gmail$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=lushenming@huawei$(echo .)com \
--cc=qperret@google$(echo .)com \
--cc=suzuki.poulose@arm$(echo .)com \
--cc=wanghaibin.wang@huawei$(echo .)com \
--cc=wangjingyi11@huawei$(echo .)com \
--cc=wangyanan55@huawei$(echo .)com \
--cc=will@kernel$(echo .)org \
--cc=yezengruan@huawei$(echo .)com \
--cc=yuzenghui@huawei$(echo .)com \
--cc=zhukeqian1@huawei$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox